sony CDP-CX70ES - Es 200 Disc Cd Player manual

The Sony CDP-CX70ES is a high-end 200-disc CD changer from the ES (Elevated Standard) series, featuring a high-density linear motor, digital servo system, 1-bit D/A converter, optical digital output, and a high-rigidity chassis for superior sound quality and disc handling. It includes a full-function remote control, random/shuffle play, programmable memory, and a front-loading magazine system. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Audio Systems 7. Loading and Playing CDs 8. Programming and Memory Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 200-disc magazine, front-loading mechanism, high-density linear motor, 1-bit D/A converter, optical digital output, full-function remote control.

Feature	Description
200-Disc Capacity	Holds up to 200 CDs in a single magazine
High-Density Linear Motor	Ensures precise disc handling and reduced vibration
1-Bit D/A Converter	Provides high-quality digital-to-analog conversion
Optical Digital Output	For connection to external digital processors or recorders
Digital Servo System	Maintains accurate tracking and stable playback
Programmable Memory	Stores play sequences for up to 32 tracks
Random/Shuffle Play	Plays discs or tracks in random order
Front Panel Display	Shows disc number, track, time, and status
Direct Disc Access	Select specific disc or track using numeric keypad
High-Rigidity Chassis	Minimizes resonance for improved sound quality

Installation

Unpack and inspect contents. Place on a stable, level surface.

Connect to amplifier/receiver: Use RCA audio cables (left/right) to AUDIO OUT jacks.
Connect digital output: Use optical cable from DIGITAL OUT to compatible device.
Power connection: Plug the AC power cord into a standard 120V AC outlet.
Insert disc magazine: Ensure unit is powered off before loading magazine.

WARNING! Unit is heavy; use caution when lifting. Ensure proper ventilation around the unit.

First-Time Setup

Power on the unit; initialize the disc magazine.

Load disc magazine: Press EJECT to open magazine slot, insert fully loaded magazine.
Initialize magazine: Unit will automatically read TOC (Table of Contents) for all discs.
Set display brightness: Use DIMMER button to adjust front panel display intensity.
Configure audio output: Select fixed or variable output level via rear switch if applicable.

CAUTION! Do not force the magazine. Ensure discs are clean and properly seated in magazine slots.

Specifications

Disc Capacity: 200 CDs (using supplied magazine).
D/A Converter: 1-bit type.
Frequency Response: 2 Hz - 20 kHz.
Signal-to-Noise Ratio: 115 dB or greater.
Total Harmonic Distortion: 0.0015% or less.
Outputs: Analog (RCA), Optical Digital.
Power Requirements: 120V AC, 60Hz.
Dimensions: Standard component width (approx. 17" W).
Remote Control: Infrared, full-function (included).

Controls and Settings

Front Panel: POWER, EJECT, PLAY, STOP, PAUSE, SKIP, numeric keypad, DISPLAY, RANDOM, PROGRAM.

Remote: POWER, numeric buttons, PLAY, STOP, PAUSE, SKIP, EJECT, RANDOM, PROGRAM, CLEAR, DISPLAY.

Playback Modes: Normal, Random (disc or track), Program (up to 32 steps), Repeat (disc/track/all). Display: Shows disc number, track, elapsed/remaining time, program memory status. Settings: Output level (fixed/variable), display dimmer, digital output format (if selectable).

Connecting to Audio Systems

Analog: Use RCA cables from AUDIO OUT to amplifier/receiver. Digital: Use optical cable to compatible DAC or recorder.

Turn off all components before making connections.
Match left/right channels (white/red connectors).
For digital connection, ensure optical cable is firmly seated.
Select correct input on amplifier (e.g., "CD").

Tip: Use high-quality cables for best audio performance. Keep cables away from power cords to reduce noise.

Loading and Playing CDs

Supports standard audio CDs (CD-DA).

Load magazine: Fill magazine with CDs, label side facing out.
Insert magazine: Press EJECT, slide magazine in until it clicks.
Play: Press PLAY; unit will start with first disc.
Select disc/track: Use numeric keypad (e.g., 1-0-5 for disc 105, then track number).
Skip: PREV/NEXT for tracks; DISC SKIP for changing discs.
Pause: Press PAUSE; resume with PLAY or PAUSE again.
Stop: Press STOP; press again to reset display.
Eject: Press EJECT to remove magazine (stops playback if active).

WARNING! Do not remove magazine during playback or initialization. Handle discs by edges only.

Programming and Memory Functions

Program Play: Store sequence of up to 32 tracks from any discs.

Press PROGRAM.
Enter disc number, then track number (e.g., 025, then 03).
Press PROGRAM again to store step.
Repeat for additional tracks.
Press PLAY to start program.
Press CLEAR to erase program or individual steps.

Random Play: Press RANDOM once for disc random, twice for track random. Repeat Modes: Press REPEAT to cycle through disc/track/all repeat.

Care & Cleaning

Unplug unit before cleaning. Use soft, dry cloth for exterior. Clean lens only with approved CD lens cleaner if necessary.

CAUTION! Do not use solvents or abrasive cleaners. Avoid magnetic fields near the unit.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. Copyright © Sony Corporation. For support, consult your authorized Sony dealer or visit www.sony.com/electronics/support. Model: CDP-CX70ES.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Ensure power cord is connected; check outlet; press POWER.
Magazine not accepted	Insertion direction/obstruction	Ensure magazine is fully inserted, label side facing out; check for obstructions.
No sound	Connections/input selection	Check audio cables; ensure amplifier is on and set to correct input.
Disc not recognized	Disc dirty/damaged	Clean disc; check for scratches; ensure disc is audio CD.
Remote not working	Batteries/obstacles	Replace batteries; point remote at sensor; remove obstacles.
Skip or playback error	Dirty lens/disc	Clean lens with approved cleaner; clean disc.

Reset: Unplug unit for 2 minutes, then reconnect to reset microprocessor.

Service: Contact authorized Sony service center. Do not open unit yourself.