Sony CDP-CX88ES - Es 200 Disc Cd Changer Manual

The Sony CDP-CX88ES is a high-end 200-disc CD changer from the ES (Elevated Standard) series, featuring a carousel mechanism, digital optical output, programmable playback, random/shuffle modes, and remote control. It supports standard audio CDs and CD-R/RW discs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CD Media 8. Programming & Memory 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 200-disc carousel magazine, Remote Control (RM-D88M), Digital Optical Output, Analog Audio Outputs, Headphone jack, Display panel with track/disc info.

Feature	Description
200-Disc Magazine	Holds up to 200 CDs for extended playback
Digital Optical Output	For connection to AV receivers or DACs
Analog Audio Outputs (RCA)	Left/Right stereo outputs
Headphone Jack	For private listening
AC Power Input	For power connection
Display	Shows disc number, track, time, and status
OPEN/CLOSE	Opens/closes disc magazine door
PLAY/PAUSE	Starts or pauses playback
STOP	Stops playback
POWER	Turns unit on/off

Installation

Unpack and inspect contents. Place on stable, level surface.

Connect audio outputs: Use RCA cables to connect to amplifier/receiver.
Connect digital output: Use optical cable to compatible receiver (optional).
Connect headphones: Plug into front panel jack if needed.
Plug into AC power outlet (120V, 60Hz).

WARNING! Unit is heavy; lift with care using two people. Ensure ventilation space around unit.

First-Time Setup

Power on unit; initialize magazine.

Load magazine: Press OPEN/CLOSE, insert magazine fully.
Initialize magazine: Unit will read TOC (Table of Contents) for all discs.
Set display brightness: Use DIMMER button on remote.
Configure audio output: Select analog or digital via rear switch.

CAUTION! Do not force magazine; ensure it is seated properly before closing.

Specifications

Disc Capacity: 200 CDs (using supplied magazine).
Supported Formats: Audio CD, CD-R, CD-RW.
Frequency Response: 2Hz–20kHz (±0.3dB).
Signal-to-Noise Ratio: >115dB.
Dynamic Range: >100dB.
Outputs: Analog RCA, Digital Optical (Toslink).
Headphone Output: 28mW into 32Ω.
Power Requirements: 120V AC, 60Hz, 23W.
Dimensions (W x H x D): Approx. 18-1/8" x 6-3/8" x 17-3/4".
Weight: Approx. 33 lbs.

Controls and Settings

Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP, DISC SKIP, TRACK SKIP.

Remote (RM-D88M): POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, RANDOM, REPEAT, PROGRAM, DISPLAY, DIMMER.

Playback Modes: Normal, Random (all discs or per disc), Repeat (disc/track/all). Programming: Store up to 32 tracks in memory. Display: Shows disc/track number, elapsed/remaining time, programming info. Audio: Fixed or variable output level (via remote volume).

Connecting Devices

Amplifier/Receiver: Use RCA cables for analog, optical cable for digital. Headphones: Standard 1/4" or 1/8" plug.

Turn off all devices before connecting.
Match cables to correct ports (red/white for analog, optical for digital).
Select correct input on amplifier/receiver (e.g., "CD").

Tip: For best sound quality, use high-quality cables and keep digital cable runs short.

Playing CD Media

Supports Audio CD, CD-R, CD-RW.

Load disc(s): Press OPEN/CLOSE, place CDs in magazine slots.
Select disc: Use DISC SKIP or numeric buttons (01-200).
Play: Press PLAY; select track with TRACK SKIP or numeric buttons.
Pause: Press PAUSE; resume with PLAY.
Stop: Press STOP; unit remembers stop position if magazine not removed.
Skip: PREV/NEXT for tracks; DISC SKIP for disc change.
Random/Shuffle: Press RANDOM for random play from all discs or current disc.
Repeat: Press REPEAT for track, disc, or all disc repeat.

WARNING! Do not touch laser lens; keep magazine clean and free of debris.

Programming & Memory

Program Play: Store up to 32 tracks in any order.

Press PROGRAM to enter programming mode.
Select disc number (01-200) using numeric buttons.
Select track number using numeric buttons.
Press PROGRAM again to store.
Repeat for additional tracks.
Press PLAY to start programmed sequence.

Memory Backup: Internal memory retains programming and disc info when powered off (with magazine loaded).

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. Clean magazine slots with compressed air if needed.

CAUTION! Do not use solvents or abrasive cleaners. Avoid exposing unit to extreme temperatures or humidity.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. Copyright © Sony Corporation. For support, visit www.sony.com/electronics/support or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Batteries/obstructions	Replace batteries; ensure line of sight to sensor; remove obstacles.
No sound	Connections/input selection	Check audio cables; ensure amplifier is on and set to correct input.
Disc not recognized	Disc type/damage	Use only Audio CD, CD-R, CD-RW; check for scratches; clean disc.
Magazine error	Magazine not seated	Eject and reinsert magazine; ensure it clicks into place.
Unit does not power on	Power cord/outlet	Check power connection; try different outlet; ensure unit is plugged in.

Reset: Unplug unit for 2 minutes, then reconnect.

Service: 1-800-222-7669; www.sony.com/electronics/support