Sony DAV-DZ640K Manual

The Sony DAV-DZ640K is a 5.1 channel DVD Home Theater System featuring a 1000W total power output, Dolby Digital and DTS decoding, USB playback, HDMI output, Digital Media Port, S-AIR wireless rear speaker capability, and a sleek design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Sound Modes & Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main AV Receiver Unit, 5 Satellite Speakers, 1 Active Subwoofer, Remote Control, FM Wire Antenna, Speaker Cables.

Feature	Description
Total Power Output	1000W (RMS)
Audio Decoding	Dolby Digital, DTS
HDMI Output	For video/audio connection to TV
USB Port	For playback of MP3, JPEG, MPEG-4 files
Digital Media Port	For optional adapters (Bluetooth, iPod, etc.)
S-AIR Technology	Wireless capability for rear speakers (optional)
FM Tuner	With 30 station presets
Sound Field	Multiple DSP modes (Cinema, Music, Sports, etc.)
Auto Calibration	DCAC (Digital Cinema Auto Calibration)
Front Panel Display	FL fluorescent display

Installation

Unpack and inspect all components. Place main unit on stable surface with adequate ventilation.

Connect Speakers: Identify Front L/R, Center, Surround L/R, and Subwoofer. Connect color-coded wires to corresponding terminals on main unit and speakers.
Connect TV: Use HDMI cable from HDMI OUT on main unit to HDMI IN on TV.
Connect Antenna: Attach supplied FM wire antenna to FM 75 OHM terminal.
Connect Power: Plug AC power cord into wall outlet last.
Position Speakers: Place front speakers at ear level, surround speakers behind listening position, subwoofer on floor near wall.

WARNING! Ensure all connections are secure before powering on. Do not block ventilation slots on main unit.

First-Time Setup

Power on the system; follow on-screen display via HDMI or front panel prompts.

Run Auto Calibration: Use supplied calibration microphone. Plug into MIC jack on front, press DCAC on remote, follow instructions.
Set Inputs: Assign names to inputs (BD/DVD, TV, USB, etc.) in SETUP menu.
Set Speaker Configuration: Confirm speaker sizes and distances after calibration.
Tune FM Radio: Press TUNER/BAND, perform auto tuning or manual preset.
Test Sound: Play a source to ensure all speakers are working correctly.

CAUTION! Do not move microphone during auto calibration. Keep room quiet.

Specifications

Amplifier Section: 1000W Total RMS Power (167W x 5 + 165W Subwoofer).
Audio Formats: Dolby Digital, DTS, MP3, AAC, WMA, LPCM.
Video Formats: MPEG-4, JPEG via USB.
Disc Compatibility: DVD-Video, DVD±R/RW, CD, CD-R/RW.
Terminals: HDMI OUT, Component Video OUT, Composite Video OUT, Analog Audio IN, USB, Digital Media Port, FM Antenna.
Speaker System: 5 Satellite Speakers (2-way bass reflex), 1 Active Subwoofer.
Wireless: S-AIR ready (requires optional SA-WS900 transmitter/receiver).
Power Requirements: 120V AC, 60Hz.
Dimensions (Main Unit): Approx. 430mm W x 105mm H x 325mm D.

Controls and Settings

Access menus via HOME button or SETUP on remote. Front Panel: POWER, OPEN/CLOSE, USB, INPUT SELECTOR, VOLUME, MIC jack.

Remote: POWER, Numeric buttons, HOME, OPTIONS, SETUP, INPUT SELECT, SOUND FIELD, DCAC, AUDIO, SUBTITLE, ANGLE.

Setup Menu: Speaker Settings (Size, Distance, Level), Input Settings, Audio Settings (Dynamic Range, DRC), Video Settings (Resolution, HDMI Control). Sound Field: CINEMA, MUSIC, SPORTS, GAME, 2CH STEREO, AFD AUTO. Audio: NIGHT mode, Dialog Enhancement.

Connecting Devices

HDMI: Primary connection to TV. Component/Composite: Alternative video connections. Audio: Analog audio inputs for external sources.

Turn off all devices before connecting.
Connect source devices (Blu-ray player, game console, cable box) to appropriate inputs on main unit using HDMI or analog cables.
Select input on main unit using INPUT SELECTOR or remote.
For USB playback, insert USB device into front USB port.

Tip: Use HDMI for best audio/video quality. Enable HDMI Control (Bravia Sync) for unified control with compatible Sony TV.

Playing Media

Supports DVD-Video, audio CDs, USB media.

Insert Disc: Press OPEN/CLOSE, load disc label side up.
Play: Press PLAY; navigate menus with arrow buttons.
For USB: Insert device, select USB input. Browse folders using arrow buttons.
Special Functions: REPEAT (A-B, Title/Chapter), ZOOM, SLOW, SEARCH.
Audio Tracks/Subtitles: Press AUDIO or SUBTITLE during playback to change.
Resume Play: System can remember stop point on some discs.

WARNING! Do not use damaged or irregularly shaped discs. Do not touch lens.

Sound Modes & Features

Sound Field: Select mode to match content (e.g., CINEMA for movies). Night Mode: Compresses dynamic range for late-night listening. Dialog Enhancement: Boosts dialogue clarity. AFD Auto: Automatically selects best decoding based on input signal.

Care & Cleaning

Unplug from wall outlet before cleaning. Use soft, dry cloth for main unit and speakers. For stubborn marks, dampen cloth slightly with water. Do not use solvents.

CAUTION! Never allow liquid to enter vents or ports. Keep speakers away from moisture.

Regulatory Information

FCC Part 15 Class B compliant. This device complies with Industry Canada licence-exempt RSS standard(s). Contains FCC ID: AK8SAIRTRX40 (for S-AIR function). Manufactured under license from Dolby Laboratories. "DTS" and "DTS Digital Surround" are registered trademarks of DTS, Inc. For product support, visit www.sony.com/audio or contact Sony Customer Support at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord, outlet	Ensure power cord is firmly connected. Try different outlet.
No sound from speakers	Connections, volume, mute	Check speaker wire connections. Ensure volume is up and mute is off. Verify input selection.
No picture	TV input, HDMI cable	Ensure TV is set to correct HDMI input. Try a different HDMI cable.
Disc not read	Disc type, dirty disc	Ensure disc is compatible and clean. Check for scratches.
Remote not working	Batteries, obstacles	Replace batteries. Point remote directly at main unit's sensor. Remove obstacles.
Poor FM reception	Antenna placement	Extend FM wire antenna fully and reposition.
Auto Calibration fails	Noise, microphone	Perform in quiet room. Ensure mic is plugged in firmly and placed at ear level.

Reset: To reset to factory defaults, hold POWER button on main unit for 5 seconds while unit is on, or use Factory Reset in Setup Menu.

Service: 1-800-222-7669; www.sony.com/audio