Sony DVP-K800D Manual

The Sony DVP-K800D is a high-performance DVD player featuring progressive scan output, DVD-Audio and SACD playback, Dolby Digital and DTS decoding, component video output, optical and coaxial digital audio outputs, and a versatile remote control. It supports a wide range of disc formats including DVD-Video, DVD-R/RW, CD, CD-R/RW, and MP3 CDs. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit with disc tray, Remote Control (RM-PP502), Component Video Outputs, Optical and Coaxial Digital Audio Outputs, Analog Audio Outputs.

Feature	Description
Progressive Scan Output	Provides superior picture quality on compatible TVs
DVD-Audio & SACD Playback	High-resolution audio format support
Dolby Digital / DTS Decoder	Built-in decoding for surround sound
Component Video Output	For high-quality video connection (Y, Pb, Pr)
Digital Audio Outputs	Optical and coaxial outputs for external receivers
Multi-Format Playback	Plays DVD, CD, MP3, JPEG, and more
OPEN/CLOSE	Ejects and closes disc tray
PLAY/PAUSE	Starts playback or pauses current disc
STOP	Stops playback
POWER	Turns player on/off

Installation

Unpack and inspect contents. Place on stable, level surface.

1. Connect video output: Use component video cables (Y, Pb, Pr) for best quality to compatible TV or projector.
2. Connect audio: Use analog RCA cables (L/R) for basic stereo, or digital optical/coaxial cable to AV receiver for surround sound.
3. Connect to AC power: Plug the supplied power cord into a 120V AC outlet.
4. Ensure all connections are secure before powering on.

WARNING! Do not place heavy objects on the player. Ensure proper ventilation around the unit.

First-Time Setup

Power on the player; the initial setup screen may appear.

1. Set language: Use the SETUP menu to select menu language (ENGLISH, ESPAÑOL, FRANÇAIS).
2. Configure video output: In SETUP, select VIDEO SETTINGS to choose output format (Interlaced, Progressive) and aspect ratio (16:9, 4:3).
3. Configure audio output: Set digital output (PCM, Bitstream), speaker configuration, and dynamic range control if needed.
4. Set parental controls: If desired, set a password and rating level in the SETUP menu.

CAUTION! Use the correct video setting for your TV to avoid picture distortion.

Specifications

• Disc Compatibility: DVD-Video, DVD-R/RW (Video mode), DVD-Audio, SACD, CD, CD-R/RW, MP3 CD, JPEG CD.
• Video Output: Component (Y/Pb/Pr), Composite, S-Video.
• Audio Output: Analog Stereo (L/R), Optical Digital, Coaxial Digital.
• Audio Decoding: Dolby Digital, DTS, MPEG Audio.
• Frequency Response: 4Hz - 44kHz (DVD-Audio), 4Hz - 22kHz (CD).
• Signal-to-Noise Ratio: 115 dB.
• Power Requirements: 120V AC, 60Hz, 18W.
• Operating Temperature: 41°F to 95°F (5°C to 35°C).

Controls and Settings

Access OSD via SETUP button on remote. Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, SEARCH, SETUP, AUDIO, SUBTITLE, ANGLE.

Setup Menu: Language, Display (TV Type, Screen Saver), Audio (Digital Out, Speaker Config, Dynamic Range), Parental (Password, Level), Custom (Progressive Scan, Black Level). Playback Settings: Audio track, Subtitle, Angle, Zoom, Repeat (Title/Chapter/Track).

Connecting Devices

TV/Projector: Component video or composite/S-video. AV Receiver: Digital optical/coaxial or analog stereo.

1. Turn off all devices before connecting cables.
2. Match cable colors to connectors (Red, Green, Blue for component video; Red/White for analog audio).
3. On your TV, select the corresponding input source (e.g., Component, Video 1).
4. On your AV receiver, select the correct digital input.

Tip: For best video quality, use high-quality component video cables.

Playing Disc Media

Supports DVD-Video, DVD-Audio, SACD, CD, MP3, JPEG.

1. Insert disc: Press OPEN/CLOSE, place disc label-side up in tray, press OPEN/CLOSE again.
2. Play: Press PLAY; disc menu may appear for navigation.
3. Navigate: Use arrow buttons and ENTER to select menu items. Use SKIP (<< or >>) for chapter/track skip.
4. Special playback: Use SEARCH (<<< or >>>) for fast forward/rewind. Press PAUSE to freeze frame.
5. Repeat: Press REPEAT to cycle through repeat modes (Off, Title, Chapter, Track).
6. Audio/Subtitle: Press AUDIO or SUBTITLE during playback to change tracks.
7. Zoom: Press ZOOM during playback to magnify picture (DVD-Video only).
8. Resume: Some discs resume from stop point when PLAY is pressed again.

WARNING! Do not move the player while a disc is spinning. Do not use damaged or irregularly shaped discs.

Audio Features

DVD-Audio/SACD: Ensure output is set correctly in SETUP menu. For multi-channel analog output, connect all 5.1 channels to compatible receiver. Dynamic Range Control: Adjusts volume range for late-night listening. Custom Sound Fields: Preset audio modes (Studio, Live, Hall) for enhanced listening.

Care & Cleaning

Unplug from AC outlet before cleaning. Use a soft, dry cloth to wipe the cabinet. For stubborn stains, dampen cloth with mild detergent solution; wring thoroughly.

CAUTION! Never use solvents such as benzene or thinner. Do not allow liquid to enter the unit through ventilation slots.

Regulatory Information

FCC Part 15: Class B digital device. Complies with Canadian ICES-003. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. For support, visit www.sony.com/electronics/support or contact Sony Customer Information Center at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into unit and wall outlet.
No picture	Incorrect input selected	Check that TV is on correct input source. Verify video cables are secure.
No sound	Audio settings/connections	Check audio cables. Verify SETUP menu audio output settings (PCM/Bitstream).
Disc won't play	Disc dirty/incompatible	Clean disc with soft cloth from center outward. Ensure disc format is supported.
Remote doesn't work	Batteries/obstruction	Replace batteries. Ensure clear path between remote and player's sensor.
Progressive scan issues	TV compatibility	Ensure TV supports progressive scan. Try switching to "Interlaced" in VIDEO SETTINGS.

Reset: Unplug unit for 1 minute, then plug back in to reset microprocessor.

Service: 1-800-222-7669; www.sony.com/electronics/support