Sony DVP-M35 Manual

The Sony DVP-M35 is a versatile DVD player featuring high-quality video playback, multi-format disc compatibility, progressive scan output, and Dolby Digital/DTS decoding. It includes component video output, coaxial and optical digital audio outputs, and a user-friendly interface with on-screen display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit, Remote Control (RM-PP402), AC power cord, Audio/Video cable, User Manual.

Feature	Description
Disc Compatibility	DVD-Video, DVD-R/RW, CD, CD-R/RW, MP3 CDs
Video Output	Component (YPbPr), S-Video, Composite
Audio Output	Coaxial digital, Optical digital, Stereo analog
Progressive Scan	Provides superior picture quality on compatible TVs
Dolby Digital/DTS	Built-in decoder for surround sound
On-Screen Display	Multi-language menu system
Parental Control	Restricts playback based on movie ratings
Zoom & Slow Motion	Detailed viewing control
Repeat Play	Title, chapter, or track repeat
Display	Front panel LED display for status

Installation

Unpack and inspect contents. Place on stable, level surface with adequate ventilation.

1. Connect video output: Use component cables (YPbPr) for best quality, or S-Video/composite.
2. Connect audio output: Use digital coaxial or optical cable for surround sound to AV receiver.
3. Connect analog audio: Use supplied RCA cable for stereo systems.
4. Plug into AC power outlet (120V, 60Hz).

WARNING! Ensure proper ventilation; do not block vents. Keep away from heat sources and moisture.

First-Time Setup

Power on player and TV; follow on-screen prompts.

1. Select language: Use SETUP menu to choose OSD language (ENGLISH, ESPAÑOL, FRANÇAIS).
2. Set TV aspect ratio: Choose 4:3 or 16:9 based on your television.
3. Configure audio: Set digital output (PCM or Bitstream), dynamic range, downmix.
4. Set parental control: Establish password and rating level if desired.
5. Test playback: Insert a DVD to verify operation.

CAUTION! Handle discs by edges; avoid touching playback surface.

Specifications

• Disc Formats: DVD, DVD-R/RW (Video mode), CD-DA, CD-R/RW, MP3.
• Video Characteristics: 480i/480p, NTSC color system.
• Audio Characteristics: Dolby Digital, DTS, MPEG audio, PCM.
• Output Terminals: Component video (YPbPr), S-Video, Composite video, Coaxial/Optical digital audio, Analog stereo audio.
• Input: None (playback only unit).
• Power Requirements: AC 120V, 60Hz, 13W.
• Dimensions (W x H x D): 17" x 2 5/8" x 10 1/4".
• Weight: 4.4 lbs.
• Operating Temperature: 41°F to 95°F (5°C to 35°C).

Controls and Settings

Front Panel: POWER, OPEN/CLOSE, PLAY, STOP, PAUSE/STEP, SKIP buttons, Display window.

Remote Control (RM-PP402): POWER, Numeric buttons, MENU, Cursor controls (UP/DOWN/LEFT/RIGHT), ENTER, RETURN, AUDIO, SUBTITLE, ANGLE, ZOOM, REPEAT, DISPLAY.

Setup Menu: Language, Screen Setup (Aspect, Display Mode), Audio Setup (Digital Out, Dynamic Range), Parental Control (Level & Password), Custom Setup (Progressive, Banner Time). Playback Settings: Audio track selection, Subtitle selection, Camera angle, Zoom (2x, 4x), Repeat (Title/Chapter/Track).

Connecting Devices

To TV: Use component, S-Video, or composite cables. To Audio System: Use digital or analog audio cables.

1. Turn off all equipment before making connections.
2. Match cable colors to jacks (Red/Green/Blue for component video; Red/White for analog audio).
3. Set TV to correct input source (e.g., Video 1, Component).
4. Set audio receiver input to correspond with DVD player connection.

Tip: For best picture quality, use component video cables and enable progressive scan if your TV supports it.

Playing Media

Supports DVD-Video, CD audio, and MP3 CDs.

1. Insert disc: Press OPEN/CLOSE, place disc label-side up in tray, press OPEN/CLOSE again.
2. Play: Press PLAY; disc menu may appear for selection.
3. Navigation: Use arrow buttons and ENTER to select from menus; numeric buttons for direct chapter/track access.
4. Special functions: Press AUDIO for alternate soundtracks; SUBTITLE for captions; ANGLE for different camera angles.
5. Search: Use SKIP (|<< or >>|) for chapter/track; press once for next, hold for fast scan.
6. Pause/Step: Press PAUSE; then press repeatedly for frame-by-frame advance.
7. Repeat: Press REPEAT to cycle through repeat modes (Off, Chapter, Title, Track).
8. Zoom: Press ZOOM to magnify picture (2x, 4x); use arrow buttons to pan.

WARNING! Do not move player during disc operation. Do not use damaged or irregularly shaped discs.

Advanced Features

Progressive Scan: Provides sharper image; enable in SETUP if TV supports 480p. Parental Control: Set level (1-8) and password in SETUP menu. Custom Picture Settings: Adjust picture parameters if available. MP3 Playback: Navigate folders using cursor buttons; supports ID3 tag display.

Care & Cleaning

Unplug from AC outlet before cleaning. Clean cabinet with soft, dry cloth. Clean disc lens only with commercial CD/DVD lens cleaner if necessary.

CAUTION! Never use solvents such as benzene or thinner. Do not expose to direct sunlight or high humidity.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Operation is subject to conditions: (1) device must not cause harmful interference, (2) device must accept any interference received. Copyright: Manufactured under license from Dolby Laboratories. "DTS" and "DTS Digital Surround" are trademarks of DTS, Inc. Macrovision: This product incorporates copyright protection technology. For support, visit www.sony.com/electronics/support or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into outlet and player.
No picture	Incorrect TV input	Select correct input on TV (Video, Component). Check video cable connections.
No sound	Audio settings/connections	Check audio cables. Ensure receiver is on and set to correct input. Verify Digital Out setting in SETUP.
Disc won't play	Disc dirty/unsupported	Clean disc with soft cloth. Ensure disc is compatible (see Specifications). Check for scratches.
Remote doesn't work	Batteries/obstruction	Replace batteries. Point remote at sensor on player. Remove obstacles.
Progressive scan not working	TV incompatibility	Disable progressive scan in SETUP if TV does not support 480p. Use interlaced output.
Skip or freeze during playback	Disc dirty/damaged	Clean disc. Try another disc. Ensure player is on level surface.

Reset: Unplug power cord for 30 seconds, then reconnect to reset microprocessor.

Service: 1-800-222-7669; www.sony.com/electronics/support