Sony DVP-NS30 Manual

The Sony DVP-NS30 is a versatile DVD player supporting DVD-Video, DVD-R/RW, DVD+R/RW, Video CD, SVCD, and audio CDs (CD-DA, MP3). It features progressive scan output, component video, composite video, S-Video, coaxial and optical digital audio outputs, and a front-panel USB port for media playback. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit, Remote Control (RMT-D197A), AV cables, AC power cord, User Manual.

Feature	Description
Progressive Scan Output	For superior picture quality on compatible TVs
Component Video Output	Y, Pb, Pr connectors for high-quality video
Digital Audio Output	Coaxial and Optical (TOSLINK) outputs
Front USB Port	For playback of JPEG, MP3, and MPEG files
Playback Compatibility	DVD, CD, Video CD, SVCD, MP3, JPEG
Dolby Digital Decoder	Built-in 5.1-channel decoder
Parental Control	Restricts playback based on ratings
Zoom & Slow Motion	Detailed viewing controls
Display	Front panel fluorescent display
Power Requirements	120V AC, 60Hz

Installation

Unpack and inspect contents. Place on a stable, level surface with adequate ventilation.

1. Connect Video Output: Use Component (preferred), S-Video, or Composite video cables to your TV.
2. Connect Audio Output: Use the included audio cables (L/R) to your TV or audio system. For digital audio, connect coaxial or optical cable to your receiver.
3. Connect AC Power Cord: Plug into a standard 120V AC outlet.
4. Remove the protective film from the front panel display.

WARNING! Ensure all devices are turned off before making connections. Do not block ventilation slots.

First-Time Setup

Power on the player and your TV. Set your TV to the correct video input.

1. Initial Language: The on-screen menu will prompt for language selection (default is ENGLISH).
2. TV Type: Set the TV screen aspect ratio (4:3 or 16:9) to match your television.
3. Output Resolution: In the SETUP menu, select the video output resolution (e.g., 480i, 480p, 720p, 1080i) compatible with your TV.
4. Audio Settings: Configure digital audio output (PCM or Bitstream) and Dynamic Range Compression.

CAUTION! Use the correct video cables for your setup to avoid picture issues.

Specifications

• Disc Compatibility: DVD-Video, DVD-R/RW (Video mode), DVD+R/RW, CD-DA, CD-R/RW, Video CD, SVCD.
• File Compatibility: MP3, JPEG, MPEG-1.
• Video Output: Component (Y/Pb/Pr), S-Video, Composite.
• Audio Output: Analog Stereo (L/R), Coaxial Digital, Optical Digital.
• Progressive Scan: Yes (for NTSC DVDs).
• Decoders: Dolby Digital, DTS* (*pass-through).
• Power Consumption: 13W (operation), 0.5W (standby).
• Dimensions (W x H x D): Approx. 17" x 2 3/8" x 10 1/4".
• Weight: Approx. 4.2 lbs.

Controls and Settings

Access menus via the SETUP button on the remote. Front Panel: POWER, OPEN/CLOSE, PLAY, STOP, USB port.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, STOP, PAUSE, SKIP, SEARCH, SETUP, AUDIO, SUBTITLE, ANGLE, ZOOM.

Setup Menu: Language, Screen (Aspect Ratio, Output Resolution), Audio (Digital Out, DRC), Parental Control (Level, Password default 0000), Custom Setup (Display, Sound). Playback Settings: Audio Track, Subtitle, Angle, Zoom (x2, x4), Repeat (Title/Chapter/Track).

Connecting Devices

Video: Connect to TV via Component, S-Video, or Composite. Audio: Connect to TV or AV receiver via analog or digital cables. USB: Connect flash drive or external HDD to front port.

1. Turn off all equipment before connecting.
2. Match cable colors to jacks (Component: Green, Blue, Red).
3. For best quality, use Component video and digital audio connections.
4. Select the corresponding input on your TV or receiver.

Tip: Use high-quality cables for optimal performance, especially for progressive scan and digital audio.

Playing Media

Supports DVDs, Video CDs, audio CDs, and files from USB.

1. Insert disc: Press OPEN/CLOSE, place disc label-side up, press again to close.
2. Play: Press PLAY. Use SKIP (>>|) or (|<<) for next/previous chapter or track.
3. Navigate: Use numeric buttons to select title/chapter/track directly.
4. Search: Press SEARCH, then use arrow keys for high-speed scan.
5. Special Functions: Press AUDIO for alternate audio tracks, SUBTITLE for subtitles, ANGLE for different camera angles.
6. USB Playback: Insert USB device, press USB button. Use menu to navigate folders and select files (JPEG, MP3, MPEG).
7. Resume: Most DVDs will resume from the last stop point if STOP was pressed once.

WARNING! Do not move the player while a disc is spinning. Do not use damaged or irregularly shaped discs.

Advanced Features

Parental Control: Set restriction level (1-8) in SETUP menu (default password 0000). Custom Picture: Adjust Picture Mode (Standard, Bright, Cinema). Bookmark: Set marks during playback for quick return. Slide Show: For JPEGs from USB/CD, configure transition and interval.

Care & Cleaning

Unplug from AC outlet before cleaning. Wipe casing with a soft, dry cloth. Clean the lens only with a specialized CD/DVD lens cleaning disc if playback issues occur.

CAUTION! Never use solvents, abrasives, or spray cleaners. Avoid locations with excessive heat, humidity, or dust.

Regulatory Information

FCC Part 15 Class B compliant. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Sony Corporation. Macrovision copy protection technology is incorporated. For product support, visit www.sony.com/support or contact Sony Customer Support at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into unit and wall outlet.
No picture	Incorrect TV input or cable	Select correct video input on TV. Check video cable connections.
No sound	Audio settings/connections	Check audio cables. In SETUP menu, verify Audio Output settings (PCM/Bitstream).
Disc won't play	Disc dirty/incompatible	Clean disc. Ensure disc type is supported (check Specifications).
Remote doesn't work	Batteries/obstruction	Replace batteries. Point remote at player's sensor. Remove obstacles.
Progressive scan not working	TV compatibility/settings	Ensure TV supports progressive scan. Enable 480p/720p/1080i in SETUP > Screen.
USB device not recognized	Format/compatibility	Device must be USB Mass Storage Class. Format as FAT16/32. Some devices may not be supported.

Reset: Unplug power cord for 1 minute, then reconnect to reset the microprocessor.

Service: For service, contact authorized Sony service center. Do not open the cabinet.