Sony DVP-NS325 Manual

The Sony DVP-NS325 is a versatile DVD player supporting DVD-Video, DVD-R/RW, DVD+R/RW, CD, CD-R/RW, and MP3 playback. It features progressive scan output, Dolby Digital and DTS compatibility, multiple video outputs (Composite, S-Video, Component), coaxial and optical digital audio outputs, and a user-friendly on-screen display. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit, Remote Control (RMT-D197P), Batteries, Audio/Video cables, Power cord.

Feature	Description
Progressive Scan Output	Provides superior picture quality on compatible TVs
Dolby Digital / DTS Decoder	Delivers cinematic surround sound
Component Video Output	For high-quality video connection (Y Pb Pr)
Digital Audio Output	Coaxial and Optical outputs for connection to AV receivers
Playback Compatibility	DVD, DVD±R/RW, CD, CD-R/RW, MP3 CDs
Front Panel Controls	Power, Open/Close, Play, Stop, etc.
OPEN/CLOSE	Ejects and closes the disc tray
DISPLAY	Shows playback information on-screen
AUDIO	Selects audio tracks or sound modes
POWER	Turns the player on/off (Standby)

Installation

Unpack and inspect all contents. Place the player on a stable, level surface near your TV and audio system.

1. Connect Video Output: Use Component (preferred), S-Video, or Composite video cables to your TV.
2. Connect Audio Output: Use the provided analog audio cables (L/R) or connect a digital coaxial/optical cable to your receiver.
3. Connect to Power: Plug the AC power cord into a standard 120V AC outlet.
4. Insert Remote Batteries: Install two AA batteries into the remote control.

WARNING! Ensure proper ventilation; do not block vents on the sides and rear of the unit.

First-Time Setup

Power on the player and TV. Follow on-screen prompts or use the remote.

1. Initial Language: Set the on-screen menu language (default is ENGLISH).
2. TV Type: Set the TV screen aspect ratio (4:3 or 16:9) to match your television.
3. Output Resolution: Set the video output resolution (e.g., 480i, 480p, 720p, 1080i) based on your TV's capability.
4. Audio Settings: Configure Digital Output (PCM or Bitstream) and Dynamic Range Compression if needed.

CAUTION! Always turn off the player and connected equipment before making or changing cable connections.

Specifications

• Disc Compatibility: DVD-Video, DVD-R/RW (Video/VR), DVD+R/RW, CD-DA, CD-R/RW, MP3.
• Video Output: Component (Y Pb Pr), S-Video, Composite.
• Audio Output: Analog Stereo (L/R), Coaxial Digital, Optical Digital.
• Audio Decoding: Dolby Digital, DTS, MPEG-2 Audio.
• Progressive Scan: Yes (for NTSC DVDs).
• Power Requirements: 120V AC, 60Hz.
• Power Consumption: Approx. 13W (Operation), < 1W (Standby).
• Dimensions (W x H x D): Approx. 17" x 2 3/8" x 10 1/4".

Controls and Settings

Access the Setup Menu via the remote control. Front Panel: POWER, OPEN/CLOSE, PLAY, STOP, SKIP buttons.

Remote: POWER, Numeric buttons, OPEN/CLOSE, MENU, DISPLAY, AUDIO, SUBTITLE, ANGLE, REPEAT, ZOOM.

Setup Menu Categories: General: Language, Parental Lock (default password 0000). Display: TV Type, Screen Saver, Output Resolution. Audio: Digital Output, DRC, Downmix. Custom Parental Lock: Set rating level (1-8).

Connecting Devices

Video: Connect to TV via Component, S-Video, or Composite. Audio: Connect to TV (stereo) or to an AV receiver (digital) for surround sound.

1. Turn off all equipment before making connections.
2. Match cable colors to jacks (Red, Green, Blue for Component; Red/White for Audio).
3. Select the correct input source on your TV or receiver (e.g., "DVD" or "Component 1").

Tip: For best picture quality, use Component video cables and set the player to Progressive Scan output if your TV supports it.

Playing Media

Supports DVDs, CDs, and MP3 files on CD-R/RW.

1. Insert disc: Press OPEN/CLOSE, place disc label-side up in the tray, press OPEN/CLOSE again.
2. Play: Press PLAY; navigation via title/chapter menus or SKIP buttons.
3. Stop: Press STOP once for pause memory, twice to clear memory.
4. Search: Use SKIP (>>|) or (|<<) for next/previous chapter; use SCROLL for fast forward/reverse.
5. Repeat: Press REPEAT to repeat a chapter, track, title, or disc.
6. Zoom: Press ZOOM during playback to magnify a section of the picture.
7. Angle: Press ANGLE if multiple camera angles are available on the disc.
8. Resume: The player can often resume playback from the last stop point.

WARNING! Do not move the player while a disc is spinning. Do not use damaged or irregularly shaped discs.

Advanced Features

Parental Control: Restrict playback of DVDs based on rating level (set password in menu). Custom Parental Lock: Assign a specific level (1-8). MP3 Playback: Navigate folders and files on a CD containing MP3s. Screen Saver: Activates if the player is left in stop mode to protect your TV screen.

Care & Cleaning

Unplug the player from the AC outlet before cleaning. Clean the cabinet with a soft, dry cloth. For stubborn stains, use a cloth slightly dampened with water. Never use solvents such as benzene or thinner.

CAUTION! Do not allow liquids to enter the unit through ventilation slots or the disc tray. Do not place heavy objects on the player.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © Sony Corporation. Macrovision: This product incorporates copyright protection technology. For customer support, visit www.sony.com/support or contact Sony Customer Information Center at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into the player and AC outlet.
No picture	Incorrect TV input	Select the correct video input source on your TV (e.g., Component, Video 1).
No sound	Audio cables/Mute	Check audio cable connections. Ensure the player or receiver is not muted.
Disc will not play	Disc dirty/incompatible	Clean the disc. Ensure the disc format is supported (see Specifications).
Remote doesn't work	Batteries/Obstruction	Replace remote batteries. Ensure nothing is blocking the remote sensor on the player.
Progressive scan not working	TV incompatibility	Set "Output Resolution" to 480i in the Setup Menu. Ensure your TV supports progressive scan via component input.

Reset: Unplug the player for 1 minute, then plug it back in to perform a soft reset.

Service: For service, contact an authorized Sony service center. Do not open the cabinet as it may expose you to dangerous voltages.