Sony DVP-NS38S Manual

The Sony DVP-NS38S is a progressive scan DVD player designed for high-quality video playback. It features a sleek design, compatibility with multiple disc formats, advanced audio/video outputs, and user-friendly operation. Below are key sections covering safety, features, installation, setup, operation, and troubleshooting for this model.

Features at a Glance

Key components: Main unit, Remote Control (RMT-D197A), AV cables, Power cord, User manual.

Feature	Description
Progressive Scan Output	Delivers high-quality, flicker-free images on compatible TVs
Multi-Format Playback	Supports DVD-Video, DVD-R/RW, DVD+R/RW, CD, CD-R/RW, MP3 CDs
Video Outputs	Component (YPbPr), S-Video, Composite (AV)
Audio Outputs	Digital Optical, Digital Coaxial, Analog Stereo (L/R)
Front Panel Controls	Power, Open/Close, Play, Stop, Skip buttons
Remote Control	Full-function remote for all operations
On-Screen Display	Multilingual menu system for easy navigation
Parental Control	Restricts playback of specific rated content
Zoom & Slow Motion	Allows detailed viewing of scenes
Last Memory Function	Resumes playback from where it was stopped

Installation

Unpack and inspect all contents. Place the player on a stable, level surface near your TV and audio system.

1. Connect Video: Use Component (YPbPr), S-Video, or Composite cables to your TV's corresponding inputs.
2. Connect Audio: Use Digital Optical/Coaxial to your AV receiver, or Analog stereo cables directly to TV/amplifier.
3. Connect Power: Plug the AC power cord into a standard 120V AC outlet.
4. Insert Batteries: Install two AAA batteries in the remote control.

WARNING! Ensure proper ventilation; do not block vents on the unit. Use caution when moving as it contains sensitive components.

First-Time Setup

Power on the player and your TV/receiver. Follow initial configuration prompts.

1. Select Language: Use the SETUP menu to choose your preferred on-screen language.
2. Configure Video Output: In SETUP, select the video output type matching your TV (e.g., Component, Progressive Scan).
3. Configure Audio Output: Set digital audio output format (PCM or Bitstream) based on your receiver's capability.
4. Set TV Aspect Ratio: Choose 4:3 or 16:9 to match your television.
5. Set Parental Control: Establish a password if desired (default may be 0000).

CAUTION! Always turn off the player and connected devices before changing cable connections.

Specifications

• Disc Formats: DVD-Video, DVD-R/RW (Video mode), DVD+R/RW, CD-DA, CD-R/RW, MP3 CDs.
• Video DAC: 10-bit/27 MHz.
• Audio DAC: 24-bit/192 kHz.
• Output Resolution: 480i, 480p (Progressive Scan).
• Frequency Response: 4 Hz - 22 kHz (CD).
• Signal-to-Noise Ratio: >115 dB.
• Dynamic Range: >100 dB.
• Power Requirements: 120 V AC, 60 Hz, 13 W.
• Dimensions (W x H x D): Approx. 17" x 2 1/2" x 10 1/4".
• Weight: Approx. 4.4 lbs.

Controls and Settings

Access the main menu by pressing the SETUP button on the remote. Front Panel: POWER, OPEN/CLOSE, PLAY, STOP, SKIP buttons.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY/PAUSE, STOP, SKIP, MENU, SETUP, AUDIO, SUBTITLE, DISPLAY, ZOOM.

Setup Menu: Language, Screen Setup (TV Type, Display Mode), Audio Setup (Digital Output, Dynamic Range), Parental Control (Level, Password), Custom Setup (Progressive Scan, Bitstream). Playback Settings: Repeat (Title/Chapter/Track), Random/Shuffle play, Angle selection, Subtitle selection, Audio track selection.

Connecting Devices

Video: Connect to TV via Component (best quality), S-Video, or Composite. Audio: Connect to AV receiver via Digital Optical/Coaxial, or to TV via Analog stereo.

1. Ensure all devices are powered off.
2. Match cable colors to connectors (Red/Green/Blue for Component Video; Red/White for Audio).
3. On your TV, select the correct input source (e.g., Video 1, Component).
4. On your audio receiver, select the corresponding digital input.

Tip: For optimal Progressive Scan picture, use high-quality Component Video cables and ensure your TV supports 480p input.

Playing Disc Media

Supports DVD-Video, audio CDs, and MP3 CDs.

1. Insert disc: Press OPEN/CLOSE, place disc label-side up, press OPEN/CLOSE again to close.
2. Play: Press PLAY; some discs may display a menu—use arrow keys and ENTER to navigate.
3. Navigate: Use PREV/NEXT to skip chapters/tracks; use number keys for direct access.
4. Special Functions: Press AUDIO to change audio track; SUBTITLE for subtitles; ANGLE for different camera angles (if available).
5. Search: Press SEARCH or use the arrow keys for fast forward/reverse.
6. Repeat: Press REPEAT to cycle through chapter, title, or track repeat modes.
7. Display: Press DISPLAY to show current playback status (time, chapter, track).
8. Resume: The Last Memory function automatically resumes playback if the disc was stopped but not ejected.

WARNING! Do not move the player while a disc is spinning. Do not use damaged or irregularly shaped discs.

Accessibility Features

Subtitle Display: Enable/select via SUBTITLE button. Audio Description: Available on some discs via the AUDIO button. Parental Control: Set rating level (G, PG, PG-13, R, etc.) in the SETUP menu using a 4-digit password.

Care & Cleaning

Unplug the player from the AC outlet before cleaning. Use a soft, dry cloth to wipe the cabinet. For the lens, use a commercially available CD/DVD lens cleaning disc if necessary.

CAUTION! Never use solvents such as benzene or thinner. Do not allow liquid or small objects to enter the unit through the disc slot or vents.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © Sony Corporation. Macrovision: This product incorporates copyright protection technology. For customer support, visit www.sony.com/support or contact Sony Customer Information Center at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into the unit and wall outlet.
No picture	Incorrect TV input/Video cable	Select correct input on TV. Check video cable connections.
No sound	Audio settings/connections	Check audio cables. Verify TV/receiver is on correct input. Check SETUP > Audio Output settings.
Disc won't play	Disc dirty/damaged/incorrect format	Clean disc. Ensure disc is compatible (see Specifications). Try another disc.
Remote doesn't work	Batteries/obstructions	Replace batteries. Ensure clear path between remote and player's sensor.
Progressive Scan not working	TV incompatibility/Settings	Ensure TV supports 480p via Component input. Enable Progressive Scan in SETUP > Custom Setup.

Reset: Unplug the player for 1 minute, then plug back in to reset the microprocessor.

Service: For service, contact an authorized Sony service center. Do not open the cabinet as it contains no user-serviceable parts.