Sony DVP-NS47P-B - CD-DVD Player Manual

The Sony DVP-NS47P-B is a versatile CD-DVD player supporting playback of DVDs, Video CDs, Audio CDs, and MP3 files. It features a sleek design, progressive scan output for enhanced picture quality, Dolby Digital and DTS compatibility, a front-panel USB port for media playback, and a remote control for convenient operation. Below are key sections covering safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit with disc tray, Remote Control (RMT-D197A), Front Panel Controls, Rear Panel Connectors, USB Port.

Installation

Unpack and inspect contents. Place on a stable, level surface with adequate ventilation.

1. Connect Video Output: Use composite (yellow), S-Video, or component (Y Pb Pr) cables to your TV or AV receiver.
2. Connect Audio Output: Use stereo RCA cables (red/white) for analog sound or a digital coaxial cable for Dolby Digital/DTS.
3. Connect Power Cord: Plug the AC power cord into a standard 120V outlet.
4. Position Remote: Point the remote at the player's sensor from within 6 meters and at an angle up to 30 degrees.

WARNING! Do not place the unit in an enclosed space or near heat sources. Ensure all connections are secure before powering on.

First-Time Setup

Power on the player and your TV/receiver. Follow on-screen prompts or use the SETUP menu.

1. Set Language: In the SETUP menu, select your preferred menu language (default is ENGLISH).
2. Configure Video Output: Select the appropriate output (e.g., COMPONENT, PROGRESSIVE) matching your TV's capabilities.
3. Configure Audio Output: Set Digital Output to ON for bitstream or OFF for PCM, depending on your receiver.
4. Set TV Screen: Choose 4:3 or 16:9 aspect ratio to match your television.
5. Set Parental Control: If desired, set a password and restriction level in the SETUP menu.

CAUTION! Do not move the player while a disc is spinning. Allow discs to stop completely before ejecting.

Specifications

• Power Supply: 120V AC, 60Hz, 13W
• Signal System: NTSC
• Video Characteristics: Horizontal Resolution: 500 lines or more (Component)
• Audio Characteristics: Frequency Response: 4 Hz - 22 kHz, S/N Ratio: 115 dB
• Output Level/Impedance: 2.0 Vrms (1 kHz, 0 dB)/ 1 kΩ
• Digital Output: Coaxial, 0.5 Vp-p, 75 Ω
• Dimensions (W x H x D): Approx. 17" x 2 1/4" x 10 3/8"
• Mass: Approx. 4.2 lbs
• Operating Temperature: 41°F to 95°F (5°C to 35°C)

Controls and Settings

Access the SETUP menu via the remote or front panel. Front Panel: POWER, OPEN/CLOSE, PLAY, STOP, USB port.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, STOP, PAUSE, SKIP, MENU, TITLE, SETUP, AUDIO, SUBTITLE, ANGLE.

SETUP Menu Options: Language, Screen Setup (TV Type, Display), Audio Setup (Digital Out, DRC), Parental Control, Custom Setup (Progressive, Jog Dial). Playback Settings: Accessed during playback via remote (AUDIO for language, SUBTITLE, ANGLE, ZOOM).

Connecting Devices

Video: Connect to TV using Composite, S-Video, or Component cables. Audio: Connect to TV/stereo via analog RCA or to AV receiver via digital coaxial.

1. Turn off all devices before making connections.
2. Match cable colors to jacks (Video=Yellow, Audio L=White, Audio R=Red).
3. For component video, connect Y (Green), Pb (Blue), Pr (Red) to corresponding inputs.
4. Set your TV or receiver to the correct input source (e.g., VIDEO 1, COMPONENT).

Tip: Use high-quality cables for best performance, especially for component video and digital audio.

Playing Media

Supports DVD, VCD, Audio CD, CD-R/RW (MP3, JPEG).

1. Insert disc: Press OPEN/CLOSE, place disc label-side up in the tray, press OPEN/CLOSE again.
2. Play: Press PLAY. Use SKIP (<< / >>) for previous/next chapter or track.
3. Navigate: Use MENU or TITLE to access disc menus. Use arrow buttons and ENTER to select.
4. Special Functions: Press PAUSE for still frame. Use SLOW buttons for slow motion. Press ZOOM during playback.
5. Repeat/Program: Press REPEAT to repeat a title/chapter/track. Press PROGRAM to create a custom play order.
6. Stop/Eject: Press STOP once to pause playback (resume with PLAY), twice to stop. Press OPEN/CLOSE to eject.

WARNING! Do not use damaged, warped, or irregularly shaped discs. Do not touch the disc's playing surface.

USB Playback

The front USB port supports playback of MP3, WMA audio files, and JPEG images from USB flash drives.

1. Ensure the player is on and no disc is playing.
2. Insert a USB device into the front port. The USB menu may appear automatically.
3. Use the arrow buttons to navigate folders and select files. Press ENTER to play an audio file or view a JPEG.
4. During MP3/WMA playback, use the remote's playback controls (PLAY, STOP, SKIP, REPEAT).
5. To safely remove the USB device, stop playback and wait for the access indicator to stop blinking before pulling it out.

Note: Not all USB devices or file systems are supported. Refer to the manual for compatible formats.

Care & Cleaning

Unplug the unit from the AC outlet before cleaning. Use a soft, dry cloth to wipe the cabinet. For stubborn stains, use a cloth lightly dampened with a mild detergent solution.

CAUTION! Never use solvents such as benzene or thinner. Do not allow liquid to enter the unit through vents or openings. Clean discs with a soft cloth, wiping from center to edge.

Regulatory Information

FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Sony Corporation. Macrovision: This product incorporates copyright protection technology. For customer support, visit www.sony.com/support or contact Sony Customer Information Service at 1-800-222-7669.

Troubleshooting

Reset: Unplug the unit from the AC outlet for one minute, then plug it back in to reset the microprocessor.

Service: For service, contact Sony Customer Information Service at 1-800-222-7669 or visit www.sony.com/support.