Sony DVP-NS40D Manual

The Sony DVP-NS40D is a progressive scan DVD player featuring high-quality video playback, compatibility with multiple disc formats, Dolby Digital and DTS output, component video output, and a sleek design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing DVD Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Progressive scan DVD player, Remote Control, Component video output, Digital audio output (coaxial), AV output jacks.

Feature	Description
Progressive Scan Output	Delivers high-quality, flicker-free images on compatible TVs
Component Video Output	For superior video quality connection to compatible displays
Digital Audio Output (Coaxial)	For connection to AV receivers supporting Dolby Digital/DTS
AV Output Jacks	Standard composite video and stereo audio outputs
AC input connector	For power connection
Disc Compatibility	Plays DVD-Video, DVD-R/RW, CD, CD-R/RW, MP3 CDs
OPEN/CLOSE	Ejects and closes the disc tray
PLAY/PAUSE	Starts playback or pauses the current disc
STOP	Stops playback
POWER	Turns player on/off

Installation

Unpack and inspect contents. Place on stable, level surface.

Connect to TV: Use component video cables (Y, Pb, Pr) for best quality, or composite video cable.
Connect audio: Use digital coaxial cable to AV receiver, or stereo audio cables to TV/amplifier.
Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block vents. Keep away from heat sources.

First-Time Setup

Power on player and TV; follow on-screen display (OSD) if available.

Set TV Type: In SETUP menu, select TV TYPE (4:3 or 16:9) to match your television.
Set Progressive Scan: Enable if connected via component to a progressive-compatible TV.
Set Audio Output: Choose between PCM or Bitstream for digital audio.
Set Language: In SETUP menu, select preferred menu language.

CAUTION! Use correct cables; improper connections may damage equipment.

Specifications

Disc Compatibility: DVD-Video, DVD-R/RW (Video mode), CD-DA, CD-R/RW, MP3 CD.
Video Output: Component (Y, Pb, Pr), Composite.
Audio Output: Digital coaxial, Stereo analog.
Audio Decoding: Dolby Digital, DTS (output via bitstream).
Progressive Scan: Yes (480p).
Power Requirements: 120V AC, 60Hz.
Dimensions: Standard component width.
Operating Temp: 41°F to 95°F (5°C to 35°C).

Controls and Settings

Access OSD via SETUP button on remote. Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, SEARCH, SETUP, AUDIO, SUBTITLE.

Setup Menu: TV TYPE (4:3, 16:9), PROGRESSIVE (On/Off), AUDIO (PCM/Bitstream), LANGUAGE, PARENTAL CONTROL. Playback: Title/Chapter selection, Repeat (Title/Chapter/All), Slow motion, Zoom (2x, 4x). Audio: Dynamic range compression, Dialog enhancer.

Connecting Devices

TV: Component or composite video. Audio System: Digital coaxial or analog stereo.

Turn off all devices before connecting.
Match cables to correct ports (component: green, blue, red).
Select correct input on TV (e.g., Component 1, Video 1).

Tip: For best video quality, use component video cables and enable progressive scan.

Playing DVD Media

Supports DVD-Video, CD-DA, MP3 CDs.

Insert disc: Press OPEN/CLOSE, place disc label-side up, close tray.
Play: Press PLAY; disc menu may appear for navigation.
Stop: Press STOP; press PLAY to resume or OPEN/CLOSE to eject.
Skip: PREV/NEXT for chapters/tracks.
Search: Press SEARCH left/right for fast forward/reverse.
Repeat: Press REPEAT to cycle through repeat modes.
Zoom: Press ZOOM during playback to magnify (2x, 4x).
Slow Motion: Press PAUSE then SLOW for frame-by-frame.

WARNING! Do not move player during disc operation. Use only compatible discs.

Accessibility Features

Subtitle Selection: Press SUBTITLE during playback to cycle available languages. Audio Track Selection: Press AUDIO during playback to switch audio tracks. Parental Control: Set level in SETUP menu to restrict playback of rated content.

Care & Cleaning

Unplug from power before cleaning. Use soft, dry cloth to wipe exterior. For lens cleaning, use approved CD/DVD lens cleaner only.

CAUTION! Never use solvents or abrasive cleaners. Do not open the casing.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. Copyright © Sony Corporation. Macrovision: Incorporates copy protection technology. For support, visit www.sony.com/support or contact 1-800-222-SONY.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Ensure power cord is securely connected; try different outlet.
No picture	Connections/TV input	Check video cables are secure; select correct input on TV.
No sound	Audio settings/connections	Check audio cables; ensure TV/amp is on and set to correct input; check player audio output setting.
Disc not recognized	Disc type/damage	Ensure disc is compatible and inserted correctly; clean disc if dirty; check for scratches.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to player's IR sensor.

Reset: Unplug power cord for 1 minute, then reconnect.

Service: 1-800-222-SONY; www.sony.com/support