Sony DVP-NS50B Manual

The Sony DVP-NS50B is a progressive scan DVD player with 108MHz/12-bit video DAC, Dolby Digital and DTS output, component video output, and a sleek design. It supports DVD-Video, DVD-R/RW, CD, CD-R/RW, and MP3 playback. Key features include a high-quality digital-to-analog converter, multiple audio/video output options, and an intuitive remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit, Remote Control (RMT-D197A), Audio/Video cables, Power cord, User manual.

Feature	Description
Progressive Scan Output	Provides smoother, flicker-free images on compatible TVs
108MHz/12-bit Video DAC	High-quality video digital-to-analog conversion
Dolby Digital / DTS Output	Supports 5.1-channel surround sound formats
Component Video Output	Delivers superior picture quality (Y Pb Pr)
Multi-format Playback	Plays DVD, DVD-R/RW, CD, CD-R/RW, MP3 CDs
Parental Control	Restricts playback of specific rated DVDs
Zoom & Slow Motion	Allows detailed viewing of scenes
Last Memory	Resumes playback from where it was stopped
Display Dimmer	Reduces front panel brightness for home theater use
Quick Start Mode	Reduces startup time

Installation

Unpack and inspect all contents. Place the player on a stable, level surface with adequate ventilation.

1. Connect to TV: Use Component Video cables (for best quality) or Composite Video (yellow RCA).
2. Connect Audio: Use Digital Optical or Coaxial cable for surround sound, or analog RCA cables (red/white).
3. Connect to Amplifier/Receiver: For surround sound, connect digital audio output to your AV receiver.
4. Plug the power cord into a standard 120V AC outlet.

WARNING! Ensure all connections are made with the unit and other devices turned OFF. Do not block ventilation openings.

First-Time Setup

Power on the player and your TV/receiver. Follow initial setup prompts.

1. Select Language: Use the SETUP menu to choose the on-screen display language.
2. Configure Video Output: Set the video output to match your TV (e.g., Progressive Scan for compatible TVs, Interlaced for standard).
3. Configure Audio Output: Set the digital audio output to match your receiver (PCM, Bitstream for Dolby/DTS).
4. Set Parental Control: If desired, set a password and rating level in the SETUP menu.

CAUTION! Do not place the unit on top of a heat-producing device like an amplifier.

Specifications

• Laser: Semiconductor laser (λ=650 nm).
• Signal System: NTSC.
• Video Characteristics: 108MHz/12-bit video DAC, Progressive Scan.
• Audio Characteristics: 24-bit/192kHz audio DAC, Dolby Digital, DTS output.
• Output Terminals: Component Video (Y Pb Pr), Composite Video, S-Video, Analog Audio (L/R), Digital Audio (Coaxial/Optical).
• Playable Discs: DVD Video, DVD-R/RW (Video mode), CD-DA, CD-R/RW, MP3 CD.
• Power Requirements: 120 V AC, 60 Hz.
• Power Consumption: 13 W (operation), 0.5 W (standby with Quick Start).
• Dimensions (W x H x D): Approx. 17" x 2 3/8" x 10 1/4".
• Weight: Approx. 4.2 lbs.

Controls and Settings

Access the Setup Menu by pressing the SETUP button on the remote.

Front Panel: POWER, OPEN/CLOSE, PLAY, STOP, PAUSE/STEP, SKIP buttons, Display window.

Remote Control (RMT-D197A): POWER, Numeric buttons, MENU, TITLE, SETUP, AUDIO, SUBTITLE, ANGLE, ZOOM, Display, Navigation arrows, ENTER.

Setup Menu Options:
Language: Menu, Audio, Subtitle, Disc.
Screen: TV Type (4:3, 16:9), Display Mode, Video Output.
Audio: Digital Output (PCM, Bitstream), Dynamic Range Control.
Parental Control: Set password and level (1-8).
Custom Setup: Display, Sound, Others.
Easy Setup: Guided initial configuration.

Connecting Devices

For optimal performance, use high-quality cables.

1. To a TV with Component Video: Connect Y (green), Pb (blue), Pr (red) cables from player to TV.
2. To an AV Receiver: Connect Digital Coaxial or Optical cable from player's DIGITAL OUT to receiver.
3. For Basic Audio/Video: Use the supplied Composite Video (yellow) and Audio (red/white) cables.
4. S-Video Connection: Use an S-Video cable for better picture quality than composite.

Tip: Ensure the TV and receiver are set to the correct input source (e.g., VIDEO 1, COMPONENT).

Playing Media

Supports DVD-Video, DVD-R/RW (Video mode), CD-DA, CD-R/RW, MP3 CDs.

1. Insert Disc: Press OPEN/CLOSE, place disc label-side up, press OPEN/CLOSE again.
2. Start Playback: Press PLAY. Use the MENU or TITLE button to access disc menus.
3. Navigate: Use SKIP (|<< / >>|) for previous/next chapter, or number buttons for direct access.
4. Special Playback Modes: PAUSE/STEP, SLOW, SEARCH (forward/reverse).
5. Zoom: Press ZOOM repeatedly to cycle through magnification levels (x2, x4).
6. Audio/Subtitle: Press AUDIO or SUBTITLE during playback to change tracks.
7. Angle: Press ANGLE if the disc contains multi-angle scenes.
8. Resume Playback: The Last Memory function will resume from the stop point if the disc is not ejected.

WARNING! Do not touch the disc's playing surface. Do not use cracked or badly warped discs.

Advanced Features

Parental Control: Set a 4-digit password in the SETUP menu to restrict playback of DVDs above a chosen rating (G, PG, PG-13, R, etc.). Default password is often 0000.

Display Settings: Adjust TV screen format (4:3 Pan Scan, 4:3 Letterbox, 16:9) and video output type (Interlaced, Progressive) in the Screen settings.

Audio Settings: Select Digital Output format (PCM for 2-channel, Bitstream for Dolby/DTS to a receiver). Enable Dynamic Range Control for nighttime viewing.

Care & Cleaning

Always unplug the unit from the wall outlet before cleaning.

Use a soft, dry cloth to clean the cabinet. For stubborn stains, use a soft cloth slightly dampened with a mild detergent solution. Never use solvents such as alcohol or benzene.

CAUTION! Do not allow liquid or small objects to fall into the unit. Do not place heavy objects on the player.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

Copyright Protection: This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation.

For customer support, visit www.sony.com/electronics/support or contact Sony Customer Information Center at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into the unit and wall outlet.
No picture	Incorrect TV input or connection	Select correct input on TV. Check video cables are secure.
No sound	Audio settings or mute	Check Digital Output setting. Ensure receiver is on and set correctly. Check MUTE.
Disc will not play	Disc dirty, damaged, or inserted upside down	Clean disc. Ensure disc is playable format and inserted label-side up.
Remote doesn't work	Obstructions, dead batteries, distance	Point remote at sensor. Replace batteries. Reduce distance/angle.
Progressive Scan not working	TV not compatible or setting incorrect	Set Video Output to "Interlaced" if TV does not support Progressive Scan.
Skip or stick during playback	Disc dirty or scratched	Clean disc with soft cloth from center outward. Avoid scratched discs.

Reset: If the unit behaves erratically, unplug it from the wall outlet for one minute, then plug it back in.

Service: For service, contact an authorized Sony service facility. Do not open the cabinet as it may expose you to dangerous voltages.