Sony DVP-NS53P Manual

The Sony DVP-NS53P is a progressive scan DVD player designed for high-quality video playback. It supports DVD-Video, DVD-R/RW, DVD+R/RW, Video CD, CD, CD-R/RW, and MP3 formats. Key features include progressive scan output for enhanced picture clarity, component video output, coaxial digital audio output, and a sleek, compact design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit, Remote Control (RMT-D197A), Batteries, Audio/Video cable, Power cord.

Feature	Description
Progressive Scan Output	Delivers high-quality, flicker-free images on compatible TVs
Component Video Output	For superior picture quality (Y, PB, PR)
Coaxial Digital Audio Output	For connection to AV receivers with Dolby Digital/DTS decoding
Composite Video Output	Standard video connection (yellow RCA)
Audio Output (L/R)	Stereo audio connection (red/white RCA)
Power	Turns unit on/off
Open/Close	Ejects and closes the disc tray
Play/Pause	Starts or pauses playback
Stop	Stops playback
Display	Shows playback information on the front panel

Installation

Unpack and inspect contents. Place on a stable, level surface with adequate ventilation.

1. Connect to TV: Use the provided composite cable (yellow) or optional component cables for best quality.
2. Connect to Audio System: Use the red/white audio cables to your TV or stereo system. For digital audio, connect the coaxial cable to your receiver.
3. Plug the power cord into a standard 120V AC outlet.

WARNING! Do not place the unit in an enclosed cabinet or near heat sources. Ensure all connections are secure before powering on.

First-Time Setup

Power on the DVD player and your TV. Follow on-screen prompts if available.

1. Select Language: Use the SETUP menu to set the on-screen display language.
2. Set TV Type: In the SETUP menu, select the appropriate TV aspect ratio (4:3 or 16:9).
3. Configure Audio: Set digital audio output format (PCM or Bitstream) based on your receiver's capabilities.
4. Set Progressive Scan: Enable Progressive Scan output if your TV supports it for optimal picture quality.

CAUTION! Handle discs by the edges to avoid fingerprints and scratches.

Specifications

• Disc Compatibility: DVD, DVD-R/RW, DVD+R/RW, Video CD, CD, CD-R/RW, MP3 CD.
• Video Output: Composite, Component (Progressive/Interlaced), S-Video (optional cable).
• Audio Output: Stereo Analog (L/R), Coaxial Digital.
• Progressive Scan: Yes (480p).
• Power Requirements: 120V AC, 60Hz, 13W.
• Operating Temperature: 41°F to 95°F (5°C to 35°C).
• Dimensions (W x H x D): Approx. 16 7/8" x 2 3/8" x 10 1/4".
• Weight: Approx. 4.2 lbs.

Controls and Settings

Access the Setup Menu via the remote control. Front Panel: POWER, OPEN/CLOSE, PLAY, STOP, DISPLAY.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY/PAUSE, STOP, MENU, TITLE, RETURN, AUDIO, SUBTITLE, ANGLE, DISPLAY, SETUP.

Setup Menu Options: Language, Display (TV Type, Screen Saver), Audio (Digital Out, Dynamic Range), Parental Control (default password 0000), Custom Setup (Progressive Scan, Bitstream Out).

Connecting Devices

TV Connection: Use Composite (Video/Audio L/R) or Component (Y, PB, PR + Audio L/R). Audio System: Use Coaxial Digital or Analog Audio cables.

1. Turn off all devices before making connections.
2. Match cable colors to jack colors on the DVD player and TV/receiver.
3. Select the correct input source on your TV (e.g., VIDEO 1, COMPONENT).

Tip: For best picture quality, use component video cables and enable Progressive Scan if supported.

Playing Media

Supports DVD-Video, Video CD, Audio CD, and MP3 CDs.

1. Insert disc: Press OPEN/CLOSE, place disc label-side up in the tray, press OPEN/CLOSE again.
2. Play: Press PLAY; use numeric buttons to select a title/chapter/track directly.
3. Navigate: Use arrow buttons, PREV/NEXT, SEARCH, and SKIP during playback.
4. Pause/Still: Press PAUSE; use STEP to advance frame by frame.
5. Stop: Press STOP; press PLAY to resume from the stop point (if resume playback is enabled).
6. Slow Motion: Press SLOW during pause.
7. Zoom: Press ZOOM to magnify a section of the picture (DVD only).
8. Audio/Subtitle: Press AUDIO or SUBTITLE to change tracks or languages during playback.

WARNING! Do not move the player while a disc is spinning. Do not use damaged or irregularly shaped discs.

Advanced Features

Parental Control: Restrict playback of specific rated DVDs via the Setup menu (password required). Custom Picture Settings: Adjust picture parameters like Brightness and Contrast in the Setup menu. MP3 Playback: Navigate folders and files on a CD-R/RW containing MP3 audio files. Repeat/Program: Set repeat modes (Title/Chapter/Track) or create a custom play sequence.

Care & Cleaning

Unplug the unit from the AC outlet before cleaning. Use a soft, dry cloth to wipe the cabinet. For stubborn stains, use a cloth slightly dampened with water. Do not use solvents such as benzine or thinner.

CAUTION! Never allow liquid or small objects to enter the unit through the ventilation slots or disc tray.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Sony Corporation. Macrovision: This product incorporates copyright protection technology. For customer support, visit www.sony.com/support or contact Sony Customer Information Center at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure the power cord is firmly plugged into the unit and the AC outlet.
No picture	Incorrect TV input selected	Select the correct video input on your TV (e.g., VIDEO 1, COMPONENT).
No sound	Audio cables/Mute	Check audio cable connections. Ensure the player or TV is not muted.
Disc cannot be played	Disc dirty/damaged or incompatible	Clean the disc. Ensure the disc format is supported (see Specifications).
Remote does not work	Batteries/Obstruction	Replace remote batteries. Ensure nothing is blocking the remote sensor on the player.
Progressive scan not working	TV incompatible/Setting incorrect	Verify your TV supports 480p. Enable Progressive Scan in the player's Setup menu.

Reset: If the unit behaves unexpectedly, unplug it from the AC outlet for one minute, then plug it back in.

Service: For service information, contact Sony at 1-800-222-7669 or visit www.sony.com/support.