Sony DVP-NS575P Manual

The Sony DVP-NS575P is a progressive scan DVD player with multi-format playback capability, supporting DVD-Video, DVD-R/RW, CD, CD-R/RW, and MP3 formats. It features component video output, Dolby Digital and DTS decoding, a 10-bit video DAC, and a sleek design for home theater integration. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit, Remote Control (RMT-D197A), AC power cord, Audio/Video cable, 2 x AA batteries.

FeatureDescription
Progressive Scan OutputFor enhanced picture quality on compatible TVs
Component Video OutputY, Pb, Pr connectors for high-quality video
Digital Audio OutputCoaxial and Optical for connection to AV receivers
Multi-Format PlaybackDVD, CD, MP3, JPEG (Photo CD)
Dolby Digital / DTS DecoderBuilt-in decoding for surround sound
10-bit Video DACHigh-quality video signal processing
Parental ControlRestricts playback of specific rated content
Zoom & Slow MotionPlayback control functions
Program PlayCustom play sequence for CDs/MP3s
Display DimmerReduces front panel brightness

Installation

Unpack and inspect contents. Place on stable, level surface near your TV and audio system.

  1. Connect Video Output: Use Component (preferred), S-Video, or Composite video cables to TV.
  2. Connect Audio Output: Use digital coaxial/optical to AV receiver, or analog audio cables directly to TV/amplifier.
  3. Plug AC power cord into wall outlet.
  4. Insert batteries into remote control.

WARNING! Ensure adequate ventilation around the unit. Do not place in enclosed cabinet or near heat sources.

First-Time Setup

Power on the player and TV. Follow initial setup prompts.

  1. Select Language: Use SETUP menu to choose OSD language (English, French, Spanish).
  2. Set TV Aspect Ratio: Choose 4:3 or 16:9 to match your television.
  3. Configure Audio Output: Set Digital Output to PCM, Dolby Digital, or DTS based on your receiver.
  4. Set Progressive Scan: Enable only if connected via Component cables to a compatible TV.

CAUTION! Always turn off the player and connected equipment before making or changing cable connections.

Specifications

Controls and Settings

Access OSD via SETUP button on remote. Front Panel: POWER, OPEN/CLOSE, PLAY, STOP, SKIP buttons, Display.

Remote: POWER, Numeric buttons, OPEN/CLOSE, MENU, TITLE, SETUP, AUDIO, SUBTITLE, ANGLE, ZOOM, Navigation arrows, ENTER.

Setup Menu: Language, Screen (Aspect Ratio, Progressive Scan), Audio (Digital Out, Dynamic Range), Parental Control (level and password). Playback Settings: Repeat, Program, Random, Resume.

Connecting Devices

Video: Component (best quality), S-Video, or Composite to TV. Audio: Digital to receiver or Analog to TV/amplifier.

  1. Turn off all equipment before connecting cables.
  2. Match cable colors to jacks (Red/Green/Blue for Component Video; Red/White for Audio).
  3. Select correct input source on your TV and AV receiver.

Tip: For best picture quality, use Component Video cables and enable Progressive Scan in the setup menu if your TV supports it.

Playing Media

Supports DVD-Video, audio CDs, MP3 CDs, and JPEG Photo CDs.

  1. Insert disc: Press OPEN/CLOSE, place disc label-side up in tray, close.
  2. Play: Press PLAY. Use TITLE or MENU to access disc menus.
  3. Navigate: Use SKIP (|<< / >>|) for previous/next chapter or track. Use arrow keys and ENTER for menu selection.
  4. Special Functions: Press AUDIO for alternate audio tracks, SUBTITLE for subtitles, ANGLE for different camera angles (if available).
  5. Zoom: Press ZOOM during playback to magnify picture (cycles through levels).
  6. Slow Motion: Press SLOW during pause.
  7. Program Play: Press PROGRAM to create a custom play sequence for CDs/MP3s.
  8. Resume: Player can often resume playback from stop point (depends on disc).

WARNING! Do not move the player while a disc is spinning. Do not use damaged or irregularly shaped discs.

Accessibility Features

Subtitle Display: Enable via SUBTITLE button or disc menu. Parental Control: Set restriction level (1-8) and a 4-digit password in the SETUP menu to block playback of specific rated DVDs.

Care & Cleaning

Unplug from AC outlet before cleaning. Wipe cabinet with a soft, dry cloth. Clean disc lens only with a commercially available CD/DVD lens cleaner if necessary.

CAUTION! Never use solvents such as benzene or thinner. Do not allow liquids or metal objects inside the unit.

Regulatory Information

FCC Part 15 Compliance: This device complies with Class B digital device limits. Macrovision Anti-Copy Protection: This product incorporates copyright protection technology. Trademarks: Sony and the Sony logo are trademarks of Sony Corporation. For product support, visit www.sony.com/electronics/support or contact Sony Customer Information Service at 1-800-222-7669.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cordEnsure power cord is securely plugged into unit and wall outlet.
Remote does not workBatteries/obstructionReplace batteries; ensure clear path to player's sensor (within 23 ft).
No pictureConnections/Input selectCheck video cables are secure; ensure TV is set to correct input source.
No soundAudio settings/connectionsCheck audio cables; verify SETUP > Audio > Digital Output setting matches your system.
Disc will not playDisc type/damageEnsure disc is compatible and not severely scratched; clean disc with soft cloth from center outwards.
Progressive Scan not workingConnection/TV compatibilityMust use Component Video cables and TV must support Progressive Scan; enable in SETUP menu.

Reset: Unplug unit from AC outlet for 2 minutes to reset microprocessor.

Service: 1-800-222-7669; www.sony.com/electronics/support

Sony DVP-NS575P Manual © - All Rights Reserved 2025