Sony DVP-NS700V Manual

The Sony DVP-NS700V is a high-quality DVD player designed for superior home entertainment. It features progressive scan output for enhanced picture clarity, compatibility with multiple disc formats (DVD-Video, DVD-R/RW, CD, MP3 CD), a sleek design, and a comprehensive remote control. Below are key sections covering safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Advanced Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit, Remote Control (RMT-D197A), AC power cord, Audio/Video cable, User Manual.

Feature	Description
Progressive Scan Output	Delivers a sharper, more stable picture on compatible TVs
Multi-Format Playback	Plays DVD-Video, DVD-R/RW, Video CD, CD, MP3 CD
Component Video Output	For high-quality video connection (Y Pb Pr)
Digital Audio Output	Coaxial and Optical outputs for connection to AV receivers
Front Panel Display	Shows playback status, time, and track information
Parental Lock	Restricts playback of discs based on ratings
OPEN/CLOSE	Ejects and closes the disc tray
PLAY/PAUSE	Starts playback or pauses the current disc
STOP	Stops playback
POWER	Turns the unit on or into standby mode

Installation

Unpack and inspect all contents. Place the player on a stable, level surface near your TV and audio system.

Connect Video: Use the provided composite cable or optional Component/SCART cable for best quality.
Connect Audio: Use the provided stereo audio cables or connect the digital output to your receiver.
Connect to AC Power: Plug the power cord into a wall outlet.
Insert Batteries: Install two AA batteries into the remote control.

WARNING! Ensure proper ventilation; do not block vents on the sides and rear of the unit.

First-Time Setup

Power on the player and your TV. Follow initial setup prompts if available.

Select Language: Use the SETUP menu to set the on-screen display language.
Configure Video Output: In SETUP, choose the correct video output format (e.g., Component, Progressive Scan) for your TV.
Set Audio Options: Configure digital audio output (PCM/Bitstream) and speaker settings.
Set Parental Control: Establish a password and desired rating level if needed.

CAUTION! Handle discs by the edges to avoid fingerprints and scratches.

Specifications

Disc Compatibility: DVD, DVD-R/RW (Video mode), CD, CD-R/RW, Video CD, MP3 CD.
Video Output: Composite Video, S-Video, Component Video (Y Pb Pr), Progressive Scan.
Audio Output: Stereo Analog, Coaxial Digital, Optical Digital.
Frequency Response: 4Hz - 22kHz (CD playback).
Signal-to-Noise Ratio: 115 dB.
Dynamic Range: 100 dB.
Power Requirements: 120V AC, 60Hz, 13W.
Operating Temperature: 41°F to 95°F (5°C to 35°C).

Controls and Settings

Access the on-screen menu via the SETUP button on the remote. Front Panel: POWER, OPEN/CLOSE, PLAY, STOP.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY/PAUSE, STOP, MENU, SETUP, AUDIO, SUBTITLE, ANGLE.

Setup Menu: Language, Display (TV Type, Screen Saver), Audio (Digital Out, DRC), Parental Lock, Custom Setup. Playback Controls: Scan, Slow Motion, Repeat (Title/Chapter/Track), A-B Repeat, Zoom, Angle Selection.

Connecting Devices

Video: Connect to TV via Composite, S-Video, or Component cables. Audio: Connect to TV/stereo via analog cables or to receiver via digital coaxial/optical cable.

Turn off all devices before making connections.
Match cable colors to jacks (Yellow=Video, Red/White=Audio).
Select the correct input source on your TV or receiver (e.g., VIDEO 1, DVD).

Tip: For best picture quality with an HDTV, use the Component Video outputs and enable Progressive Scan in the setup menu.

Playing Media

Supports DVD-Video, Video CD, Audio CD, and MP3 CDs.

Insert disc: Press OPEN/CLOSE, place disc label-side up in the tray, press OPEN/CLOSE again.
Play: Press PLAY; use numeric buttons to select a title or chapter directly.
Navigate: Use PREV/NEXT to skip chapters or tracks; use arrow keys for menu navigation.
Special Modes: Press REPEAT for chapter/title/track repeat; use A-B to repeat a specific segment.
Search: Use SCAN forward or backward during playback.
Slow Motion: Press SLOW during pause or playback.
Zoom: Press ZOOM to magnify a section of the picture.
Angle: Press ANGLE to select different camera angles if available on the disc.

WARNING! Do not move the player while a disc is spinning. Do not use damaged or irregularly shaped discs.

Advanced Features

Parental Control: Set a 4-digit password and maximum allowed rating in the SETUP menu. Custom Picture Settings: Adjust picture parameters like Brightness and Contrast in the Custom Setup menu. Digital Audio Output: Configure for Bitstream (for Dolby Digital/DTS receivers) or PCM.

Care & Cleaning

Unplug the unit from the AC outlet before cleaning. Wipe the cabinet with a soft, dry cloth. Clean the disc lens only with a commercially available CD/DVD lens cleaner.

CAUTION! Never use solvents such as benzene or thinner. Do not allow liquid or small objects to fall inside the unit.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © Sony Corporation. Macrovision: This product incorporates copyright protection technology. For customer support, visit www.sony.com/support or contact 1-800-222-SONY.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure the power cord is firmly plugged into the unit and the wall outlet.
No picture	Incorrect TV input or cable	Select the correct input on your TV. Check video cable connections.
No sound	Audio settings or mute	Check audio cables. Ensure TV/receiver is on and not muted. Verify Audio settings in SETUP.
Disc won't play	Disc dirty/incompatible	Clean the disc. Ensure the disc format is supported (see Specifications).
Remote doesn't work	Batteries/obstruction	Replace remote batteries. Ensure nothing is blocking the IR sensor on the player.
Progressive Scan not working	TV incompatibility	Ensure your TV supports Progressive Scan. Try switching to Interlace output in SETUP.

Reset: If the unit behaves unexpectedly, unplug it from the AC outlet for one minute, then plug it back in.

Service: 1-800-222-SONY; www.sony.com/support