Sony DVP-NS75H Manual

The Sony DVP-NS75H is a progressive scan DVD player featuring HDMI output, DVD-Audio and SACD playback, Dolby Digital and DTS decoding, component video output, coaxial and optical digital audio outputs, and a sleek, compact design. It supports a wide range of disc formats including DVD-Video, DVD-R/RW, CD, CD-R/RW, and MP3 CDs. Below are key sections covering features, setup, operation, specifications, and troubleshooting.

Features at a Glance

Key components: Main unit, Remote Control (RMT-D197A), Batteries, AC power cord, Audio/Video cable, Instruction Manual.

Feature	Description
HDMI Output	For digital video and audio connection to compatible displays
Component Video Output	For high-quality analog video connection (Y, Pb, Pr)
Coaxial/Optical Digital Audio	For connection to AV receivers for digital surround sound
Progressive Scan Output	Provides sharper, flicker-free images on compatible TVs
DVD-Audio & SACD Playback	Supports high-resolution audio formats
Multi-Format Playback	Plays DVD, CD, MP3, JPEG, and other compatible formats
Dolby Digital / DTS Decoder	Built-in decoder for surround sound formats
Front Panel Controls	POWER, OPEN/CLOSE, PLAY, STOP, Navigation buttons
Display	Front panel display showing status, time, and track info
Remote Sensor	For receiving signals from the supplied remote

Installation

Unpack and inspect all contents. Place the player on a stable, level surface with adequate ventilation.

1. Connect Video: Use HDMI for best quality, or Component/Composite video cables to your TV or projector.
2. Connect Audio: Use digital coaxial/optical cable to an AV receiver, or analog audio cables directly to TV.
3. Connect Power: Plug the supplied AC power cord into the player and a wall outlet.
4. Insert Batteries: Install two AA batteries into the remote control.

WARNING! Ensure the player is placed in a well-ventilated area. Do not block ventilation slots.

First-Time Setup

Power on the player and your TV/AV receiver. Follow initial setup prompts if displayed.

1. Select Language: Use the SETUP menu to set the on-screen display language.
2. Configure Video Output: In SETUP, select the appropriate video output (HDMI, Component, etc.) and resolution.
3. Configure Audio Output: Set audio output format (PCM, Bitstream) and speaker settings.
4. Set Parental Control: If desired, set a password (default may be 0000) to restrict playback.

CAUTION! Handle discs by the edges. Avoid touching the playback surface.

Specifications

• Disc Formats: DVD-Video, DVD-R/RW (Video mode), DVD-Audio, SACD, CD, CD-R/RW, MP3 CD, JPEG.
• Video Output: HDMI, Component (Y Pb Pr), Composite.
• Audio Output: Coaxial Digital, Optical Digital, Stereo Analog (L/R).
• Audio Decoding: Dolby Digital, DTS, DVD-Audio, SACD (DSD).
• Video Features: Progressive Scan, 1080p/720p upscaling via HDMI (select models).
• Power Requirements: 120V AC, 60Hz.
• Power Consumption: Approx. 13W during playback.
• Dimensions (W x H x D): Approx. 17" x 2 3/8" x 10 1/4".
• Weight: Approx. 4.6 lbs.

Controls and Settings

Access the on-screen menu via the SETUP button on the remote. Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP.

Remote: POWER, Numeric buttons, OPEN/CLOSE, MENU, SETUP, NAVIGATION (Arrow keys, ENTER), AUDIO, SUBTITLE, ANGLE, DISPLAY, REPEAT, A-B, ZOOM.

Setup Menu: Language, Video Setup (Output, TV Type, Screen Saver), Audio Setup (Digital Output, Dynamic Range, Downmix), Parental Control (Level, Password), Custom Setup (Display, Audio DRC). Playback Settings: Use AUDIO, SUBTITLE, and ANGLE buttons during playback for disc-specific features.

Connecting to Your System

HDMI: Single cable for video and audio to a compatible TV. Component/Composite: Use corresponding video and separate audio cables. Digital Audio: Coaxial or optical to an AV receiver.

1. Turn off all equipment before making connections.
2. Match cable colors to jacks (Red/White for Audio, Red/Green/Blue for Component Video).
3. Select the correct input source on your TV or AV receiver (e.g., HDMI 1, Video 2).

Tip: For best audio quality with surround sound, use a digital audio connection to an AV receiver.

Playing Discs

Supports DVD-Video, DVD-Audio, SACD, CD, and MP3/JPEG discs.

1. Insert disc: Press OPEN/CLOSE, place disc label-side up in the tray, press OPEN/CLOSE again.
2. Play: Press PLAY; use numeric buttons to select title/track, or arrows for navigation.
3. Stop: Press STOP once for pause memory, twice to clear memory.
4. Search/Skip: Use PREV/NEXT or LEFT/RIGHT arrows to skip chapters/tracks.
5. Special Playback: Use REPEAT (A-B, Chapter, Title), SLOW, STEP, ZOOM.
6. Audio/Subtitle: Press AUDIO or SUBTITLE during playback to change tracks.
7. Angle: Press ANGLE if multiple camera angles are available on the disc.
8. Resume: The player may resume playback from the last stop point for some discs.

WARNING! Do not move the player while a disc is spinning. Allow discs to eject fully before removing.

Audio Setup Features

Digital Output: Set to PCM (for TVs) or Bitstream (for AV receivers). Dynamic Range Control: Adjusts volume range for night listening. Downmix: For stereo playback from surround sources. DVD-Audio & SACD: Ensure proper connections (HDMI or analog) for high-resolution audio.

Care & Cleaning

Unplug the player from the AC outlet before cleaning. Wipe the cabinet with a soft, dry cloth. For stubborn stains, use a cloth slightly dampened with water. Clean the lens only with a commercially available CD/DVD lens cleaner if necessary.

CAUTION! Never use solvents such as benzene or thinner. Do not allow liquid to enter the unit.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. Copyright © Sony Corporation. Trademarks are property of their respective owners. Macrovision: This product incorporates copyright protection technology. For product support, visit www.sony.com/support or contact Sony Customer Support at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into the unit and wall outlet.
No picture	Incorrect input selected	Select the correct input on your TV (e.g., HDMI 1). Check video cables.
No sound	Audio settings/cables	Check audio cables. Verify Digital Output setting in SETUP menu matches your system.
Disc will not play	Disc format/damage	Ensure disc is compatible and not damaged. Clean the disc. Check region code.
Remote does not work	Batteries/obstruction	Replace remote batteries. Ensure clear path between remote and player's sensor.
Upscaling not working	TV compatibility	Ensure TV supports the selected resolution (e.g., 1080p). Try a different HDMI cable.

Reset: Unplug the player for 1 minute, then plug it back in to perform a soft reset.

Service: For service information, contact Sony at 1-800-222-7669 or visit www.sony.com/support.