Sony DVP-S500D Manual

The Sony DVP-S500D is a high-performance DVD player featuring advanced video processing, multi-format disc compatibility, progressive scan output, and a range of audio/video connectivity options. Designed for home theater integration, it supports DVD-Video, DVD-R/RW, DVD+R/RW, CD, CD-R/RW, and MP3 playback. Below are key sections covering safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit, Remote Control (RMT-D197A), AC power cord, Audio/Video cables, User Manual.

Feature	Description
Progressive Scan Output	Provides superior picture quality on compatible TVs
Multi-Format Playback	DVD, DVD±R/RW, Video CD, CD, CD-R/RW, MP3
Component Video Output	For high-quality video connection (YPbPr)
Digital Audio Output	Coaxial and Optical for connection to AV receivers
Analog Audio Output	Stereo RCA jacks for direct TV/speaker connection
Front Panel Display	Shows playback status, time, track information
OPEN/CLOSE	Ejects and closes the disc tray
PLAY/PAUSE	Starts playback or pauses the current disc
STOP	Stops playback
POWER	Turns the unit on/off (standby)

Installation

Unpack and inspect all contents. Place the player on a stable, level surface with adequate ventilation.

1. Connect Video Output: Use Component Video (YPbPr), S-Video, or Composite Video cables to your TV or AV receiver.
2. Connect Audio Output: Use Digital Coaxial/Optical cable to an AV receiver or Analog RCA cables to your TV/amplifier.
3. Plug the AC power cord into a standard 120V AC outlet.
4. Ensure all connections are secure and correct.

WARNING! Do not place the unit in an enclosed cabinet without proper ventilation. Allow at least 4 inches of space on all sides.

First-Time Setup

Power on the player and your TV/receiver. Follow initial configuration steps.

1. Select Video Output: Press SETUP on the remote, navigate to VIDEO SETTINGS, and choose the output matching your connection (Component, S-Video, Composite).
2. Set TV Aspect Ratio: In VIDEO SETTINGS, select 4:3 or 16:9 based on your TV.
3. Configure Audio: In AUDIO SETTINGS, set Digital Output (PCM or Bitstream) and Dynamic Range Compression.
4. Set Parental Control: In FEATURES menu, set a password (default 0000) and desired restriction level.

CAUTION! Always turn off the player and connected equipment before making or changing connections.

Specifications

• Disc Compatibility: DVD-Video, DVD-R/RW (Video mode), DVD+R/RW, Video CD/SVCD, CD-DA, CD-R/RW, MP3 CD.
• Video Output: Component (YPbPr), S-Video, Composite.
• Audio Output: Digital Coaxial, Digital Optical, Analog Stereo (RCA).
• Frequency Response: 4Hz - 22kHz (CD).
• Signal-to-Noise Ratio: >115 dB.
• Dynamic Range: >100 dB.
• Power Requirements: 120V AC, 60Hz, 15W.
• Operating Temperature: 41°F to 95°F (5°C to 35°C).

Controls and Settings

Access the on-screen menu via the SETUP button on the remote. Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP (PREV/NEXT), MENU, SETUP, AUDIO, SUBTITLE, ANGLE.

Video Settings: Output Select, TV Type, Progressive Scan (On/Off), Black Level. Audio Settings: Digital Output, Dynamic Range, Downmix. Features: Parental Control (Level & Password), Display Language, Screen Saver. Playback Modes: Repeat (Title/Chapter/Track), Random Play, Program Play.

Connecting Devices

TV/Display: Use Component, S-Video, or Composite video cables. AV Receiver: Use Digital Coaxial or Optical cable for best audio.

1. Turn off all devices before making connections.
2. Match cable colors to jacks (Red/Green/Blue for Component Video; Red/White for Audio).
3. On your TV, select the corresponding input source (e.g., Video 1, Component).

Tip: For optimal picture quality with a compatible HDTV, use the Component Video outputs and enable Progressive Scan in the setup menu.

Playing Disc Media

Supports a wide range of disc formats.

1. Insert disc: Press OPEN/CLOSE, place disc label-side up in the tray, press OPEN/CLOSE again.
2. Play: Press PLAY; navigation varies by disc type (use Title/Menu for DVDs, Track select for CDs).
3. Stop: Press STOP once to pause playback, twice to return to beginning.
4. Skip: Use PREV/NEXT to jump chapters (DVD) or tracks (CD).
5. Search: Press LEFT/RIGHT arrows during playback for fast forward/reverse.
6. Repeat: Press REPEAT to cycle through repeat modes (Off, Chapter, Title, Track).
7. Program Play: Press PROGRAM to create a custom play sequence from disc contents.
8. Resume: Most DVDs will resume from the last stop point when PLAY is pressed again.

WARNING! Do not move the player while a disc is spinning. Do not use damaged, warped, or irregularly shaped discs.

Advanced Features

Progressive Scan: Delivers a non-interlaced picture for reduced flicker and sharper detail (enable in VIDEO SETTINGS if your TV supports it). Parental Control: Restrict playback of DVDs based on ratings (default password 0000). On-Screen Display: Menu language can be set to English, French, or Spanish.

Care & Maintenance

Unplug the unit from the AC outlet before cleaning. Use a soft, dry cloth to wipe the cabinet. For stubborn marks, use a cloth slightly dampened with water. Never use solvents such as benzene or thinner.

CAUTION! Do not allow liquids to enter the unit through ventilation slots or the disc tray. Keep the unit away from extreme heat, humidity, and dust.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © Sony Corporation. Macrovision: This product incorporates copyright protection technology. For customer support, visit www.sony.com/electronics/support or contact Sony Customer Information Center at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure the AC power cord is firmly plugged into the unit and the wall outlet.
No picture	Incorrect input selected	Check that your TV is set to the correct video input source.
No sound	Audio cables/ settings	Verify audio connections. Check TV/Receiver volume. Ensure MUTE is off.
Disc will not play	Disc format/ condition	Ensure the disc is compatible, inserted correctly (label up), and is not badly scratched.
Remote doesn't work	Batteries/ obstacles	Replace remote batteries. Ensure nothing is blocking the IR sensor on the player.
Progressive Scan not working	TV compatibility/ settings	Confirm your TV supports 480p/Progressive Scan. Enable it in the player's VIDEO SETTINGS.

Reset: Unplug the unit from the AC outlet for 2 minutes to perform a soft reset.

Service: For service information, contact 1-800-222-7669 or visit www.sony.com/electronics/support