Sony DVP-S500D Manual

The Sony DVP-S500D is a high-performance DVD player featuring progressive scan output, multi-format disc compatibility (DVD-Video, DVD-R/RW, DVD+R/RW, CD, MP3, JPEG), component video output, coaxial and optical digital audio outputs, and a sleek, compact design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit, Remote Control (RM-PP502), AC power cord, Audio/Video cable, "R6" (size AA) batteries.

Feature	Description
Progressive Scan Output	Delivers superior picture quality on compatible TVs
Multi-Format Playback	Plays DVD, CD, MP3, JPEG, and recordable DVD formats
Component Video Output	For high-quality video connection (Y, Pb, Pr)
Digital Audio Output	Coaxial and Optical outputs for connection to AV receivers
Front Panel Controls	Power, Open/Close, Play, Stop, Skip buttons
Display	Front panel fluorescent display for status and track info
OPEN/CLOSE	Ejects or closes the disc tray
PLAY	Starts disc playback
STOP	Stops playback
POWER	Turns the player on/off

Installation

Unpack and inspect contents. Place on a stable, level surface with adequate ventilation.

1. Connect to TV: Use Component Video cables (for best quality) or the supplied Composite Video cable (yellow).
2. Connect Audio: Use the supplied stereo audio cables (red/white) or connect digital audio (coaxial/optical) to your receiver.
3. Plug the AC power cord into a wall outlet.
4. Insert batteries (supplied) into the remote control.

WARNING! Do not place the unit in an enclosed cabinet or on soft surfaces that may block ventilation slots. Ensure all connections are secure before powering on.

First-Time Setup

Power on the player and your TV/receiver. Follow initial setup prompts if applicable.

1. Select Output Resolution: Press SETUP on the remote. Navigate to VIDEO SETTINGS and select the appropriate output (480i, 480p, 720p, 1080i) for your TV.
2. Set Audio Preferences: In AUDIO SETTINGS, configure Digital Output (PCM or Bitstream) and Dynamic Range Compression.
3. Set Parental Controls: In SETUP menu, navigate to LOCK/PARENTAL CTRL to set a password and rating level (default is off).
4. Confirm Connections: Ensure the correct input is selected on your TV and/or AV receiver.

CAUTION! Use the correct video cables. Incorrect connection may result in no picture or poor quality.

Specifications

• Disc Compatibility: DVD-Video, DVD-R/RW (Video mode/VR mode), DVD+R/RW, CD-DA, CD-R/RW, MP3 CD, JPEG CD.
• Video Output: Component (Y/Pb/Pr), Composite, S-Video.
• Audio Output: Analog Stereo (L/R), Coaxial Digital, Optical Digital.
• Frequency Response: 4Hz - 22kHz (CD).
• Signal-to-Noise Ratio: 115 dB.
• Dynamic Range: 100 dB.
• Power Requirements: 120 V AC, 60 Hz.
• Power Consumption: 13 W (operation), 0.5 W (standby).
• Dimensions (W x H x D): 17" x 2 3/8" x 10 1/4".
• Weight: 5.1 lbs.

Controls and Settings

Access the on-screen menu via the SETUP button on the remote. Front Panel: POWER, OPEN/CLOSE, PLAY, STOP, SKIP buttons.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, MENU, TITLE, SETUP, AUDIO, SUBTITLE, ANGLE.

Setup Menu Categories: VIDEO (TV Type, Screen Saver, etc.), AUDIO (Digital Out, DRC), LANGUAGE (Menu, Audio, Subtitle), LOCK/PARENTAL CTRL, OTHERS (Display, Power Save).

Connecting Devices

TV Connection: Use Component Video (preferred) or Composite Video. Audio System: Use Digital Audio (coaxial/optical) for surround sound or analog stereo cables.

1. Turn off all devices before making connections.
2. Match cable colors to jacks (Component: Green/Y, Blue/Pb, Red/Pr).
3. For digital audio, use a single connection (coaxial OR optical) to your receiver.
4. Select the corresponding input source on your TV and AV receiver.

Tip: For the best picture quality with an HDTV, always use the Component Video outputs and set the player to progressive scan mode (480p or higher).

Playing Disc Media

Supports DVD-Video, audio CDs, MP3 CDs, and JPEG photo CDs.

1. Insert disc: Press OPEN/CLOSE, place disc label-side up in the tray, press OPEN/CLOSE again to close.
2. Play: Press PLAY. Use the MENU or TITLE button to access disc menus.
3. Navigate: Use arrow keys and ENTER to select items. Use SKIP (<< or >>) for previous/next chapter or track.
4. Search: Press SEARCH or use the left/right arrow keys during playback.
5. Special Playback Modes: Use PAUSE, SLOW, STEP (forward frame-by-frame).
6. Repeat: Press REPEAT to cycle through chapter/track/all repeat modes.
7. Zoom: Some discs support zoom via the remote's ZOOM button.
8. Resume: The player can often resume playback from the last stop point (Title Resume or Disc Resume).

WARNING! Do not move the player while a disc is spinning. Do not use damaged or irregularly shaped discs.

Advanced Features

Parental Control: Restrict playback of DVDs based on rating (G, PG, PG-13, R, etc.). Set a 4-digit password in the LOCK menu. Multi-Angle/Subtitle/Audio: Use ANGLE, SUBTITLE, and AUDIO buttons on the remote to access alternate tracks if encoded on the disc. Photo & Music Playback: For JPEG/MP3 CDs, use the MENU or SEARCH functions to navigate folders and files.

Care & Cleaning

Unplug the unit from the AC outlet before cleaning. Use a soft, dry cloth to wipe the cabinet. For stubborn stains, use a cloth slightly dampened with a mild detergent solution. Never use solvents such as benzine or thinner.

CAUTION! Do not allow liquid or small objects to fall into the unit. Do not place heavy objects on the player.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Sony Corporation. Macrovision: This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision. For support, visit www.sony.com/support or contact Sony customer service at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure the AC power cord is firmly plugged into the wall outlet and the player.
No picture	Incorrect TV input or video cable	Select the correct input on your TV. Ensure video cables are connected securely. Verify VIDEO OUTPUT setting in SETUP menu.
No sound	Audio cables/ settings incorrect	Check audio connections. Ensure TV/receiver is on and set to correct input. Check AUDIO settings in SETUP menu.
Disc will not play	Disc dirty, damaged, or incompatible	Clean the disc with a soft cloth from center to edge. Ensure the disc format is supported. Check for severe scratches.
Remote does not work	Batteries/obstructions	Replace remote batteries. Ensure nothing is blocking the infrared sensor on the player. Operate remote within 30 feet and at an angle within 30 degrees.
Progressive scan not working	TV incompatibility or setting	Ensure your TV supports progressive scan input. Verify the VIDEO OUTPUT is set to 480p/720p/1080i in the SETUP menu.

Reset: If the unit operates abnormally, unplug it from the AC outlet for a few minutes, then plug it back in.

Service: For service, contact Sony Customer Support at 1-800-222-7669 or visit www.sony.com/support.