Sony DVP-S7000 Manual

The Sony DVP-S7000 is a high-performance DVD player renowned for its exceptional video and audio quality, featuring advanced digital processing, component video outputs, optical and coaxial digital audio outputs, and compatibility with various disc formats. Below are key sections covering its features, setup, operation, specifications, and maintenance.

Features at a Glance

Key components: High-precision disc transport mechanism, Remote Commander (remote control), Component Video Outputs, Digital Audio Outputs (Optical/Coaxial), Analog Audio Outputs.

Feature	Description
Component Video Output (Y/Pb/Pr)	Delivers superior picture quality by separating video signals
Digital Audio Output (Optical & Coaxial)	For connection to AV receivers or sound systems
Analog Audio Output (L/R)	Standard stereo audio connection
10-bit Video DAC	Ensures high-resolution video signal processing
24-bit Audio DAC	Provides high-fidelity audio reproduction
Compatible Disc Formats	DVD-Video, Video CD, Audio CD, CD-R/RW (MP3/JPEG)
PLAY/PAUSE	Starts or pauses disc playback
STOP	Stops playback
OPEN/CLOSE	Ejects or closes the disc tray
POWER	Turns the unit on or into standby mode

Installation & Connections

Unpack and inspect contents. Place on a stable, level surface away from heat sources and magnets.

1. Connect to TV: Use Component Video cables (Y, Pb, Pr) for best quality, or Composite Video (yellow RCA).
2. Connect Audio: Use Optical/Coaxial digital cable to an AV receiver, or Analog Audio cables (red/white RCA) to TV or amplifier.
3. Plug the AC power cord into a standard wall outlet.
4. Ensure all connections are secure before powering on.

WARNING! Do not place heavy objects on the unit. Ensure proper ventilation around the player.

First-Time Setup

Power on the player and your TV/receiver. Follow initial setup prompts if available.

1. Set TV Type: In the SETUP menu, select the appropriate TV aspect ratio (4:3 or 16:9).
2. Configure Audio Output: Choose between Bitstream (for external decoder) or PCM output for digital audio.
3. Set Language: In the SETUP menu, select menu language, disc menu language, and audio language preferences.
4. Test Playback: Insert a DVD to verify video and audio connections are working correctly.

CAUTION! Handle discs by the edges. Avoid touching the playback surface.

Specifications

• Disc Compatibility: DVD, Video CD, Audio CD, CD-R, CD-RW (MP3/JPEG).
• Video Output: Component (Y/Pb/Pr), Composite, S-Video.
• Audio Output: Optical Digital, Coaxial Digital, Analog Stereo (L/R).
• Frequency Response: 4Hz - 44kHz (Audio CD).
• Signal-to-Noise Ratio: >115dB.
• Dynamic Range: >100dB.
• Power Requirements: 120V AC, 60Hz.
• Power Consumption: Approx. 18W (operation), 2W (standby).
• Dimensions (W x H x D): Approx. 430mm x 98mm x 315mm.
• Weight: Approx. 5.5 kg.

Front & Rear Panel Controls

Access basic functions directly from the unit. Front Panel: POWER, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP (|<< / >>|). Display Window: Shows track/time information and status icons.

Rear Panel: AC IN, COMPONENT VIDEO OUT (Y, Pb, Pr), VIDEO OUT (Composite), S VIDEO OUT, AUDIO OUT (L/R), DIGITAL OUT (OPTICAL, COAXIAL).

Remote Control Operation

Remote Commander: POWER, Numeric buttons, MENU, Cursor arrows (UP/DOWN/LEFT/RIGHT), ENTER, RETURN, TITLE, MENU, AUDIO, SUBTITLE, ANGLE, DISPLAY, REPEAT, A-B, ZOOM, SEARCH MODE.

Use the remote to navigate on-screen menus, select chapters/tracks, adjust playback settings, and access special features like angle selection or subtitle change.

Playing Discs

Supports DVD-Video, Video CD, and Audio CD playback.

1. Insert disc: Press OPEN/CLOSE, place disc label-side up in the tray, press OPEN/CLOSE again.
2. Play: Press PLAY. The player may automatically start or display the disc menu.
3. Navigate: Use arrow keys and ENTER to select from disc menus, or numeric keys to jump to a title/chapter/track.
4. Pause/Still: Press PAUSE. Use SLOW buttons for forward/reverse slow motion.
5. Stop: Press STOP. Press PLAY to resume from the stop point (if resume memory is supported).
6. Skip/Search: Press SKIP (|<< / >>|) for chapter/track skip. Hold down SEARCH (<< / >>) for high-speed scan.
7. Eject: Press OPEN/CLOSE. Remove the disc when the tray opens fully.

WARNING! Do not move the player while a disc is spinning. Never force the disc tray closed.

Advanced Playback Features

Repeat: Press REPEAT to cycle through repeat modes (Title, Chapter, Track, A-B). Zoom: Press ZOOM during playback to magnify a section of the picture. Angle: Press ANGLE if the disc contains multi-angle scenes. Audio/Subtitle: Press AUDIO or SUBTITLE to change language tracks. Display: Press DISPLAY to show elapsed time, remaining time, and chapter/track info.

System Settings & Menu Navigation

Press MENU on the remote to access the player's setup menu.

Settings include: Video Setup (TV Type, Output Resolution), Audio Setup (Digital Output, Dynamic Range Control), Language Setup (Menu, Audio, Subtitle, Disc Menu), Parental Control (set level and password), Custom Setup (Display, Screen Saver).

Use the arrow keys to navigate and ENTER to select. Press RETURN to go back.

Care & Maintenance

Unplug the unit from the AC outlet before cleaning. Wipe the cabinet with a soft, dry cloth. For stubborn stains, use a cloth lightly dampened with a mild detergent solution. Never use abrasive cleaners or solvents.

Clean the lens only if necessary with a commercially available CD/DVD lens cleaner. Do not attempt to open the cabinet.

CAUTION! Avoid exposure to drips, splashes, and excessive dust. Do not block ventilation slots.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure the AC power cord is firmly plugged into the wall outlet and the player.
No picture	Incorrect input selected on TV	Ensure TV is set to the correct video input (e.g., Component, Video 1). Check video cables.
No sound	Audio cables/Mute	Check audio connections. Ensure TV/Receiver is not muted and volume is up. Verify Digital Output setting in menu.
Disc won't play	Disc dirty/damaged or incompatible	Clean the disc. Ensure disc is compatible (see Specifications). Check for deep scratches.
Remote doesn't work	Batteries/Obstruction	Replace remote batteries. Ensure nothing is blocking the IR sensor on the player. Operate within range (approx. 7m).
Picture is distorted	TV format mismatch	Go to SETUP > Video Setup and select the correct TV Type (4:3 or 16:9).

Reset: If the unit behaves unexpectedly, unplug it from the AC outlet for one minute, then plug it back in.

Service: For service, contact Sony Customer Support or an authorized Sony service center. Do not attempt to repair the unit yourself.