sony DVP-S9000ES - Sacd-dvd Player manual

The Sony DVP-S9000ES is a high-end Super Audio CD (SACD) and DVD-Video player designed for audiophiles and home theater enthusiasts. It features advanced digital-to-analog conversion, high-quality audio circuitry for both SACD and DVD-Audio playback, robust construction for reduced vibration, multiple digital and analog audio outputs, component video output, and extensive setup options for optimal performance. Below are key sections for overview, installation, operation, settings, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. Initial Setup 4. Specifications 5. Controls and Functions 6. Connecting to Your System 7. Playing SACD and DVD Media 8. Audio and Video Settings 9. Maintenance 10. Regulatory & Support 11. Troubleshooting

Features at a Glance

Key components: High-precision disc transport, Dual Disc Mechanism, High-quality DACs for SACD (DSD) and PCM, Analog audio outputs (RCA and XLR), Digital audio outputs (Coaxial, Optical), Component video output, Remote control, Sturdy chassis.

Feature	Description
SACD Playback	Supports Stereo and Multi-channel Super Audio CDs
DVD-Video Playback	Plays DVD-Video discs with high-quality video output
DVD-Audio Support	Plays DVD-Audio discs (with compatible content)
Audio CD Playback	Plays standard Compact Discs
Digital Outputs	Coaxial and Optical for PCM audio
Analog Outputs	RCA (Stereo/Multi-channel) and Balanced XLR outputs
Component Video Output	Y/Pb/Pr for high-quality video connection
Remote Control	Full-function remote for player and basic TV control
Direct Play	Buttons for direct selection of SACD, DVD, CD modes
Display Dimmer	Adjusts or turns off front panel display brightness

Installation

Unpack carefully and inspect all components. Place the player on a stable, level surface away from heat sources and strong magnetic fields.

Connect to TV/Display: Use Component Video cables (Y, Pb, Pr) for best video quality. Alternatively, use S-Video or Composite video.
Connect to Audio System: For best audio, use the analog RCA or XLR outputs to your receiver/preamp. For digital connection, use coaxial or optical cable to your AV receiver.
Connect Power Cord: Plug the supplied power cord into the AC inlet on the rear panel, then into a wall outlet.
Install Remote Batteries: Insert two AA batteries into the remote control.

WARNING! This unit is heavy. Use proper lifting technique and consider assistance during placement.

Initial Setup

Power on the player and your TV/Audio system. Follow basic configuration steps.

Select Video Output: In the SETUP menu, choose the video output type matching your connection (Component, S-Video, Composite).
Configure Audio Output: Set Audio Output to "Analog" if using RCA/XLR cables to your amp, or "Digital" if using coaxial/optical. For SACD, analog or dedicated DSD-capable link is required.
Set SACD Priority: Choose whether to play the SACD layer or CD layer on hybrid discs.
Adjust Display: Use the DIMMER button on the front panel or remote to set display brightness.

CAUTION! Ensure all devices are powered off before making connections.

Specifications

Disc Compatibility: SACD, DVD-Video, DVD-Audio, CD, CD-R/RW (playback of compatible formats).
Audio DAC: High-bit, high-sampling rate DAC for PCM; 1-bit DSD DAC for SACD.
Frequency Response: SACD: 2Hz - 100kHz; CD: 2Hz - 20kHz.
Signal-to-Noise Ratio: 115 dB (SACD).
Dynamic Range: 100 dB (SACD).
Outputs: Analog Audio (RCA x 5.1, XLR x 2), Digital Audio (Coaxial, Optical), Component Video (Y/Pb/Pr), S-Video, Composite Video.
Inputs: AC Power Inlet.
Power Requirements: 120V AC, 60Hz.
Dimensions & Weight: Substantial chassis for vibration control; consult manual for exact figures.

Controls and Functions

Front Panel: POWER, OPEN/CLOSE, PLAY, STOP, PAUSE, SKIP, DIMMER, SACD/DVD/CD Direct Select buttons, Display Window.

Remote Control: POWER, Numeric buttons, OPEN/CLOSE, MENU, CURSOR/ENTER, AUDIO (for multi-angle/track), SUBTITLE, DISPLAY, REPEAT, A-B, ANGLE, TITLE, CHAPTER, SKIP, PLAY/PAUSE/STOP, DIMMER.

On-Screen Menus: SETUP menu for Video Output, Audio Output, Speaker Setup, Digital Output (PCM/Off), SACD Playback Layer, Screen Saver, etc. Playback Menus: Access disc menus, titles, chapters, angles, and audio/subtitle tracks.

Connecting to Your System

For optimal performance, use high-quality cables.

Video Connection: Connect Component Video outputs (Y, Pb, Pr) to corresponding inputs on your TV or projector.
Analog Audio Connection: Connect the 5.1ch RCA outputs to the multi-channel analog inputs on your AV receiver. For stereo, use the FRONT L/R outputs. Connect XLR outputs to balanced inputs if available.
Digital Audio Connection: Connect Coaxial or Optical output to your receiver's digital input for PCM audio from DVDs and CDs.
Power Connection: Last step after all other cables are connected.

Tip: Keep audio and video cables separated to avoid interference.

Playing SACD and DVD Media

Supports SACD (Stereo & Multi-channel), DVD-Video, DVD-Audio, CD.

Insert Disc: Press OPEN/CLOSE, place disc on tray label-side up, press OPEN/CLOSE again to close.
Select Source: Player may auto-detect. You can press SACD, DVD, or CD button on front panel to manually select mode.
Basic Playback: Press PLAY. Use SKIP, SEARCH, PAUSE, STOP.
Navigating Discs: Use TITLE to go to disc's main menu. Use CHAPTER to skip chapters. Use numeric buttons to select title/chapter/track.
Audio/Subtitle Tracks: During playback, press AUDIO or SUBTITLE button to cycle through available tracks.
Repeat: Press REPEAT to repeat a title, chapter, track, or all.
Display Info: Press DISPLAY to show playback status (time, track, audio format).

WARNING! Do not move the player during disc playback. Handle discs by the edges.

Audio and Video Settings

Access the SETUP menu by pressing MENU on the remote while stopped.

Video Output: Set to match your connection (Component, S-Video, Composite).
Audio Output: Analog, Digital (PCM), or Off. For SACD multi-channel, use Analog.
Digital Output: For PCM CDs/DVDs, set to PCM. Can be set to Off for pure analog path.
SACD Playback: Choose "SACD Layer" or "CD Layer" priority for hybrid discs.
Speaker Setup: Set speaker configuration (Large/Small) and distance/delay if using analog multi-channel outputs.
Screen Saver: Enable to prevent image retention on certain displays.

Maintenance

Unplug the player from the AC outlet before cleaning. Use a soft, dry cloth to wipe the cabinet. For stubborn stains, use a cloth slightly dampened with water. Do not use solvents.

CAUTION! Never use benzene, thinner, or other chemicals. Do not allow liquid to enter the ventilation slots or disc tray.

Regulatory & Support

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received. Copyright © Sony Corporation. Sony and the SACD logo are trademarks of Sony Corporation. For technical support and service, contact Sony Customer Support or visit www.sony.com/electronics/support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into player and wall outlet.
No picture	Incorrect video connection/menu setting	Check cables are secure. Ensure TV is on correct input. Check Video Output setting in SETUP menu.
No sound from SACD	Incorrect audio connection/setting	SACD requires analog connection or i.LINK (if equipped). Set Audio Output to Analog in SETUP.
Disc will not play	Disc dirty/damaged or incompatible	Clean disc. Ensure disc format is supported (SACD, DVD, CD). Check region code for DVDs.
Remote doesn't work	Batteries/obstruction	Replace remote batteries. Ensure clear path between remote and player's sensor.
Multi-channel audio not working	Incorrect cabling/settings	Ensure all 6 RCA cables are connected from player to receiver's multi-channel inputs. Set player's Speaker Setup correctly.

Reset: Unplug the player from AC for 5 minutes to reset microprocessor.

Service: Contact authorized Sony service center. Do not open the cabinet.