Sony DVP-SR100 Manual

The Sony DVP-SR100 is a compact, progressive-scan DVD player designed for high-quality video playback. It supports a wide range of disc formats including DVD-Video, DVD-R/RW, DVD+R/RW, CD, CD-R/RW, and MP3 CDs. Key features include HDMI output for digital video/audio, component video output, Dolby Digital and DTS decoding, parental controls, and a sleek, space-saving design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit, Remote Control (RMT-D197A), Batteries, AC power cord, Quick Setup Guide.

Feature	Description
HDMI Output	For single-cable digital connection to HDTV (video and audio)
Component Video Output	For high-quality analog video connection (YPbPr)
Composite Video Output	Standard video connection (yellow RCA jack)
Digital Audio Output (Coaxial)	For connection to AV receiver (Dolby Digital, DTS)
Analog Audio Output (Stereo)	Left/Right RCA jacks for stereo sound
AC Power Input	For power connection
OPEN/CLOSE Button	Opens and closes the disc tray
POWER Button	Turns the player on or to standby
USB Port	For playback of media files from USB storage devices (optional)
Progressive Scan Output	Provides sharper picture quality on compatible TVs

Installation

Unpack and inspect all contents. Place the player on a stable, level surface near your TV.

1. Connect to TV: Use HDMI cable for best quality, or Component/Composite video cables.
2. Connect to Audio System: Use digital coaxial cable to AV receiver, or stereo RCA cables directly to TV.
3. Plug the AC power cord into a wall outlet.
4. Insert two R6 (size AA) batteries into the remote control.

WARNING! Ensure proper ventilation; do not block vents on the sides or rear of the unit.

First-Time Setup

Power on the player and your TV. Follow initial setup prompts if displayed.

1. Select Language: Use the SETUP menu to choose the on-screen display language.
2. Set TV Type: Configure the video output format (e.g., 16:9, 4:3) to match your TV.
3. Configure Audio: Set digital audio output (PCM or Bitstream) based on your audio system.
4. Set Parental Control: Establish a password if desired (default may be 0000).

CAUTION! Always turn off the player and disconnect the power cord before making or changing connections.

Specifications

• Disc Formats: DVD-Video, DVD-R/RW (Video mode/VR mode), DVD+R/RW, CD-DA, CD-R/RW, MP3 CD.
• Video Output: HDMI, Component (YPbPr), Composite.
• Audio Output: Digital Coaxial, Stereo Analog.
• Audio Decoding: Dolby Digital, DTS.
• Video Features: Progressive Scan, 1080p Upscaling via HDMI.
• Power Requirements: 120V AC, 60Hz.
• Power Consumption: Approx. 8W (operation), less than 0.5W (standby).
• Dimensions (W x H x D): Approx. 8.1" x 1.6" x 7.9".
• Weight: Approx. 2.2 lbs.

Controls and Settings

Access the Setup Menu by pressing the SETUP button on the remote. Front Panel: POWER, OPEN/CLOSE, PLAY, STOP.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY/PAUSE, STOP, SKIP/PREV/NEXT, MENU, TITLE, SETUP, AUDIO, SUBTITLE, ZOOM.

Setup Menu Options: Language (OSD, Disc Menu, Audio, Subtitle), Screen (TV Type, Display), Audio (Digital Out, DRC), Parental Control (Level, Password), Others (HDMI, Quick Start). Use the arrow keys and ENTER to navigate and select.

Connecting to Your TV/Audio System

For optimal performance, use an HDMI connection. For older equipment, use Component or Composite video.

1. Turn off all equipment before making connections.
2. Connect video cable(s) from player output to corresponding TV input.
3. Connect audio cable(s) from player to TV or audio receiver.
4. Power on equipment and select the correct input source on your TV (e.g., HDMI 1).

Tip: Use high-speed HDMI cables for 1080p upscaling. Ensure cables are firmly seated.

Playing Discs

Supports DVD-Video, audio CDs, and MP3 CDs.

1. Load Disc: Press OPEN/CLOSE, place disc label-side up in the tray, press OPEN/CLOSE again.
2. Start Playback: Press PLAY. Use the disc's menu or press TITLE/MENU.
3. Navigate: Use PREV/NEXT to skip chapters/tracks. Use arrow keys and ENTER in menus.
4. Special Functions: Press AUDIO to change soundtrack; SUBTITLE for subtitles; ZOOM to magnify picture.
5. Resume Play: Press PLAY after STOP to resume from last stop point (if disc supports it).
6. Repeat: Press REPEAT to repeat a title, chapter, track, or disc.

WARNING! Do not move the player while a disc is spinning. Do not use damaged or irregularly shaped discs.

Parental Controls & Settings

Parental Control: Restrict playback of DVDs based on rating (e.g., G, PG, R). Access via SETUP > Parental Control. Default password is often 0000. Change it for security. Other Settings: Customize HDMI output resolution, enable Quick Start mode, set Dynamic Range Compression (DRC) for late-night viewing.

Care & Maintenance

Unplug the player from the wall outlet before cleaning. Wipe the cabinet with a soft, dry cloth. For stubborn stains, use a cloth slightly dampened with water. Never use solvents such as benzene or thinner.

CAUTION! Do not allow liquids or metal objects to enter the unit. Keep the disc tray and ventilation openings free of dust.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. Copyright © Sony Corporation. Trademarks are property of their respective owners. Macrovision: This product incorporates copyright protection technology. For product support, visit www.sony.com/support or contact Sony Customer Information Center at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into player and wall outlet.
No picture	Incorrect input selected	Select the correct video input on your TV (e.g., HDMI 1).
No sound	Audio settings/cables	Check audio connections. In Setup Menu, verify Audio > Digital Out setting (PCM/Bitstream).
Disc won't play	Disc dirty/unsupported	Clean disc. Ensure disc format is supported (see Specifications).
Remote doesn't work	Batteries/obstruction	Replace remote batteries. Ensure clear path between remote and player's sensor.
Upscaling not working	TV compatibility	Ensure TV supports the resolution set in HDMI settings (e.g., 1080p). Try a different resolution.

Reset: To restore factory settings, go to SETUP > Others > Initialize. This will erase all custom settings.

Service: For service information, contact Sony at 1-800-222-7669 or visit www.sony.com/support.