Sony DVP-SR101B Manual

The Sony DVP-SR101B is a standard DVD player designed for reliable playback of DVD-Video, CD, and MP3 formats. It features a slim profile, progressive scan output for enhanced picture quality, HDMI connectivity for digital audio/video, coaxial digital audio output, and a simple, intuitive remote control. Below are key sections covering setup, operation, features, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. Front & Rear Panel Overview 4. Specifications 5. Remote Control Functions 6. Connecting to Your TV & Audio System 7. Playing Discs 8. Playback Functions & Settings 9. Care & Maintenance 10. Regulatory & Safety Information 11. Troubleshooting

Features at a Glance

Key components: Slim DVD player chassis, Remote Control (RMT-D197A), HDMI output, Coaxial digital audio output, Composite video output.

FeatureDescription
HDMI OutputFor single-cable digital connection to HDTVs (video and audio)
Progressive ScanProvides smoother, higher-quality video on compatible TVs
Coaxial Digital Audio OutputFor connection to home theater receivers (Dolby Digital, DTS)
Composite Video OutputStandard analog video connection (yellow RCA jack)
Audio Outputs (L/R)Standard analog stereo audio connections (red/white RCA jacks)
PLAY/PAUSEStarts or pauses disc playback
STOPStops playback
OPEN/CLOSEEjects or closes the disc tray
POWERTurns the player on or into standby mode
Numeric ButtonsFor direct title/chapter/track selection

Installation & Setup

Unpack the player and accessories. Place on a stable, level surface with adequate ventilation.

  1. Connect to TV: Use HDMI cable for best quality, or composite video cable (yellow).
  2. Connect to Audio System: Use coaxial digital cable to receiver, or analog audio cables (red/white) directly to TV.
  3. Connect Power Cord: Plug the AC power cord into a standard 120V AC outlet.
  4. Insert Batteries: Install two AAA batteries into the remote control.

WARNING! Ensure the player is placed in a well-ventilated area. Do not block ventilation slots.

Front & Rear Panel Overview

Front Panel: POWER button, OPEN/CLOSE button, Display window, Disc tray.

Rear Panel: AC IN connector, HDMI OUT jack, COAXIAL DIGITAL AUDIO OUT jack, VIDEO OUT (composite) jack, AUDIO OUT L/R jacks.

Specifications

Remote Control Functions

Primary remote buttons: POWER, Numeric (0-9), OPEN/CLOSE, PLAY/PAUSE, STOP, MENU, TOP MENU, RETURN, Cursor arrows (Up/Down/Left/Right), ENTER, AUDIO (for alternate audio tracks), SUBTITLE, DISPLAY, REPEAT, ANGLE (if available on disc).

Use the MENU button to access the player's setup menu for configuration.

Connecting to Your TV & Audio System

For best picture quality, use an HDMI connection. For audio, connect to a home theater system via coaxial digital cable.

  1. Turn off all equipment before making connections.
  2. Connect HDMI cable from player's HDMI OUT to TV's HDMI IN.
  3. For surround sound, connect coaxial cable from player's COAXIAL OUT to receiver's DIGITAL IN.
  4. Set your TV to the correct HDMI input source.
  5. Set your receiver to the correct digital audio input.

Tip: If using composite video, ensure TV is set to the corresponding video input (e.g., VIDEO 1).

Playing Discs

Supports DVD-Video, audio CDs, and MP3 CDs.

  1. Insert disc: Press OPEN/CLOSE, place disc label-side up in tray, press OPEN/CLOSE again.
  2. Playback starts automatically for most DVDs. For CDs, press PLAY.
  3. Navigate: Use PREV/NEXT to skip chapters/tracks. Use numeric buttons for direct access.
  4. Pause: Press PLAY/PAUSE. Resume by pressing again.
  5. Stop: Press STOP once to stop (resume possible). Press twice or turn off player for complete stop.
  6. Eject: Press OPEN/CLOSE during stop mode.

WARNING! Do not move the player while a disc is spinning. Do not use damaged or irregularly shaped discs.

Playback Functions & Settings

Access the Setup Menu by pressing MENU on the remote while stopped.

Care & Maintenance

Unplug the player from the AC outlet before cleaning. Use a soft, dry cloth to wipe the cabinet. For stubborn stains, use a cloth slightly dampened with water. Do not use solvents such as benzene or thinner.

CAUTION! Never allow liquid or small objects to enter the player through the ventilation slots or disc tray.

Regulatory & Safety Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © Sony Corporation. All rights reserved. "Sony" and the Sony logo are trademarks of Sony Corporation. For product support, visit www.sony.com/support or call 1-800-222-SONY (7669).

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord not connectedEnsure power cord is firmly plugged into player and wall outlet.
No pictureIncorrect TV inputSelect the correct input on your TV (e.g., HDMI 1).
No soundAudio settings/connectionsCheck audio cables. In Setup Menu, verify Digital Output setting matches your system.
Disc will not playDisc dirty/incompatibleClean disc with soft cloth. Ensure disc format is supported (DVD, CD, MP3).
Remote does not workBatteries/obstructionReplace batteries. Ensure clear path between remote and player's sensor.
Picture is distortedResolution settingIn Setup Menu, try a different Output Resolution (e.g., 720p) compatible with your TV.

Reset: Unplug the player for 1 minute, then plug back in to perform a soft reset.

Service: For issues not resolved above, contact Sony Customer Support.

Sony DVP-SR101B Manual © - All Rights Reserved 2025