Sony DVP-SR110 Manual

The Sony DVP-SR110 is a compact, slot-loading DVD player designed for home entertainment. It supports playback of DVD-Video, DVD-R/RW, DVD+R/RW, CD, CD-R/RW, and MP3 CDs. Key features include HDMI output for high-quality digital video/audio, component video output, Dolby Digital and DTS compatibility, parental controls, and a sleek, space-saving design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Slot-loading DVD mechanism, Remote Control (RMT-D197A), HDMI output, Component video output, Digital audio output (coaxial), Analog audio outputs.

Feature	Description
HDMI Output	For high-definition digital video and audio connection to compatible TVs
Component Video Output	For high-quality analog video connection (Y, Pb, Pr)
Digital Audio Output (Coaxial)	For connection to AV receivers supporting Dolby Digital/DTS
Analog Audio Outputs (L/R)	Standard stereo audio connection
AC Power Input	For power connection
Slot-loading Mechanism	Disc is inserted directly into the slot; no tray
OPEN/CLOSE	Ejects disc from slot (on remote and front panel)
POWER	Turns player on/off
HDMI CEC (BRAVIA Sync)	Allows control of compatible Sony devices with one remote
Parental Control	Restricts playback of DVDs based on ratings

Installation

Unpack and inspect contents. Place on a stable, level surface near your TV and audio system.

1. Connect to TV: Use HDMI cable for best quality (recommended). Alternatively, use Component video cables (green, blue, red).
2. Connect Audio: For surround sound, connect the DIGITAL AUDIO OUT (COAXIAL) to your AV receiver. For stereo, use the ANALOG AUDIO OUT L/R cables.
3. Plug into AC power outlet.
4. Insert the included batteries into the remote control.

WARNING! Ensure the player is placed in a well-ventilated area. Do not block ventilation openings.

First-Time Setup

Power on the player and your TV. Set your TV to the correct input source (e.g., HDMI 1).

1. Initial Language: The on-screen menu will prompt for language selection (default is ENGLISH).
2. TV Type: Set the TV screen format (4:3 or 16:9) to match your television.
3. Audio Settings: Configure digital audio output format (PCM or Bitstream) based on your AV receiver's capabilities.
4. Parental Control: Set a password (default may be 0000) if you wish to restrict DVD playback by rating.

CAUTION! Do not insert any objects other than a standard disc into the slot.

Specifications

• Disc Compatibility: DVD-Video, DVD-R/RW (Video mode/VR mode), DVD+R/RW, CD-DA, CD-R/RW, MP3 CD.
• Video Output: HDMI (up to 1080p/60Hz), Component (480i/480p/720p/1080i).
• Audio Decoding: Dolby Digital, DTS, MPEG-2 Audio.
• Audio Output: HDMI (multichannel PCM/Bitstream), Coaxial Digital, Analog Stereo.
• Special Features: Parental Control (DVD rating), HDMI CEC (BRAVIA Sync), Quick Start mode.
• Power Requirements: 120V AC, 60Hz.
• Power Consumption: Approx. 8W (operation), <1W (standby with Quick Start off).
• Dimensions (W x H x D): Approx. 8.1" x 1.6" x 7.9".

Controls and Settings

Access the Setup Menu by pressing the HOME or SETUP button on the remote. Front Panel: POWER button, Slot, Status LED.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, STOP, PAUSE, SKIP (PREV/NEXT), HOME, SETUP, AUDIO, SUBTITLE, TOP MENU, POP-UP MENU.

Setup Menu Categories: Screen Settings: TV Type, Display Position. Audio Settings: Digital Audio Output, Dynamic Range Compressor. Language Settings: Menu, Audio, Subtitle. Parental Control: Set Password and Level. System Settings: HDMI Setup, Quick Start.

Connecting Devices

HDMI: Single cable for video and audio to TV. Component: Use three video cables (Y, Pb, Pr) plus audio cables. Digital Audio: Coaxial cable to AV receiver.

1. Turn off all devices before making connections.
2. For HDMI, connect one end to player's HDMI OUT, other end to TV's HDMI IN.
3. Select the corresponding input source on your TV (e.g., HDMI 1).
4. For audio-only systems, connect DIGITAL AUDIO OUT (COAXIAL) to receiver.

Tip: Use high-speed HDMI cables for reliable 1080p signal transmission.

Playing Media

Supports DVD-Video, CD Audio, and MP3 CDs.

1. Insert disc: Gently insert a disc (label side up) into the slot until the player pulls it in.
2. Playback: Playback may start automatically. Use PLAY, PAUSE, STOP.
3. Navigation: Use SKIP (PREV/NEXT) to jump chapters/tracks. Use numeric buttons to select a title/chapter/track directly.
4. Search: Press SEARCH or use LEFT/RIGHT arrows during playback for fast forward/reverse.
5. On-Screen Menus: Press TOP MENU or POP-UP MENU to access disc menus.
6. Audio/Subtitle: Press AUDIO or SUBTITLE button during playback to change track or language.
7. Resume: Some discs may resume playback from the last stop point when PLAY is pressed.

WARNING! Do not force a disc into the slot. Do not pull a disc out during loading or playback. Ensure discs are clean and free of cracks.

Accessibility Features

Subtitle Display: Enable/disable via SUBTITLE button or Setup Menu. Parental Controls: Restrict playback of DVDs based on MPAA ratings (G, PG, PG-13, R, etc.) via the Setup Menu. Default password is often 0000.

Care & Cleaning

Unplug the player from the AC outlet before cleaning. Use a soft, dry cloth to wipe the cabinet. For stubborn stains, dampen the cloth slightly with water. Do not use solvents such as benzene or thinner.

CAUTION! Never spray liquid directly onto the unit. Do not allow water to drip inside the slot or ventilation openings.

Regulatory Information

FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Sony Corporation. Macrovision: This product incorporates copyright protection technology. For customer support, visit www.sony.com/support or contact Sony customer service at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is firmly plugged into the player and AC outlet.
No picture	Input selection / Cable	Ensure TV is set to correct input source (HDMI/Component). Check cable connections.
No sound	Audio settings / Mute	Check TV or receiver volume. Verify Audio Output settings in Setup Menu (e.g., PCM vs. Bitstream).
Disc cannot be played	Disc type / Condition	Ensure disc is compatible and inserted correctly (label side up). Clean disc if dirty or scratched.
Disc will not eject	Power issue	Ensure player is powered on. If not, plug in power and press OPEN/CLOSE. If stuck, contact service.
Remote doesn't work	Batteries / Obstruction	Replace remote batteries. Ensure clear path between remote and player's sensor.

Reset: Unplug the player from AC outlet for 2 minutes to perform a soft reset.

Service: For service information, visit www.sony.com/support or call 1-800-222-7669.