Sony DVP-SR170 Manual

The Sony DVP-SR170 is a progressive scan DVD player with HDMI output, USB port for media playback, Dolby Digital and DTS output, JPEG photo viewing, and compatibility with DVD, CD, and MP3 formats. It features a sleek design, simple remote control, and easy setup for home entertainment systems. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. USB Playback 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: DVD player unit, Remote Control, HDMI output, USB port, AV composite output, Coaxial digital audio output.

FeatureDescription
HDMI outputFor high-quality digital video and audio connection to HDTV
USB portFor playback of MP3, JPEG, and DivX files from USB storage
Progressive ScanProvides sharper, clearer picture quality on compatible TVs
AV composite outputStandard video and audio connection (yellow/white/red RCA)
Coaxial digital audioFor connection to home theater systems
Dolby Digital / DTSSurround sound compatibility
OPEN/CLOSEEjects and closes disc tray
PLAY/PAUSEControls disc playback
STOPStops playback
POWERTurns player on/off

Installation

Unpack and inspect contents. Place on stable, level surface near TV.

  1. Connect to TV: Use HDMI cable for best quality, or AV composite cables.
  2. Connect to audio system: Use coaxial digital cable for surround sound.
  3. Connect USB device: Insert USB drive into front USB port.
  4. Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block vents. Keep away from heat sources.

First-Time Setup

Power on player and TV; follow on-screen prompts if available.

  1. Select language: Use SETUP menu to choose OSD language.
  2. Set TV type: Choose 4:3 or 16:9 aspect ratio to match your TV.
  3. Configure audio: Select audio output format (PCM, Bitstream).
  4. Set parental controls: Enter password if needed (default 0000).

CAUTION! Handle discs carefully; insert with label side up.

Specifications

Controls and Settings

Access menu via SETUP button on remote. Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, MENU, SETUP, AUDIO, SUBTITLE.

Setup Menu: Language, TV Type, Audio, Parental Lock, Display. Playback: Title/Chapter selection, Repeat, Zoom, Angle. Audio: Digital output format, Dynamic range control. Display: On-screen display settings.

Connecting Devices

HDMI: Connect to TV HDMI input. AV: Use composite cables to TV. Audio: Coaxial to receiver.

  1. Turn off all devices before connecting cables.
  2. Match cable colors to ports (yellow-video, white/red-audio).
  3. Select correct input on TV (HDMI, AV, etc.).

Tip: Use high-speed HDMI cable for best performance.

Playing Media

Supports DVD-Video, audio CDs, MP3 CDs.

  1. Insert disc: Press OPEN/CLOSE, place disc in tray, press again to close.
  2. Play: Press PLAY; use numeric buttons for direct track access.
  3. Navigate: Use arrow buttons for menu navigation; ENTER to select.
  4. Special functions: REPEAT for chapter/title repeat; ZOOM for picture magnification.
  5. Audio tracks: Press AUDIO to switch between available audio tracks.
  6. Subtitles: Press SUBTITLE to turn on/off or switch languages.
  7. Resume: Player remembers stop point on most discs.

WARNING! Do not move player during disc playback. Keep discs clean and free of scratches.

USB Playback

Insert USB device before turning on player or accessing USB menu.

  1. Press USB button on remote to access USB contents.
  2. Navigate folders using arrow buttons.
  3. Select file and press PLAY to begin playback.
  4. Supported formats: MP3 (audio), JPEG (photos), DivX (video).

Note: Some USB devices may require additional power; use self-powered drives.

Care & Cleaning

Unplug from power before cleaning. Use soft, dry cloth; avoid chemicals.

CAUTION! Never use abrasive cleaners. Do not open casing; no user-serviceable parts inside.

Regulatory Information

FCC compliance: Class B digital device. Manufactured under license from Dolby Laboratories. DTS and DTS Digital Surround are registered trademarks. Macrovision copy protection incorporated. For support, visit www.sony.com/support or contact 1-800-222-7669.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord/outletCheck power connection; try different outlet.
No pictureConnections/TV inputEnsure cables secure; select correct TV input (HDMI/AV).
No soundAudio settings/connectionsCheck audio cables; verify TV/receiver volume; check player audio settings.
Disc not recognizedDisc type/damageEnsure disc is compatible and clean; try different disc.
Remote not workingBatteries/obstructionsReplace batteries; ensure clear path to IR sensor.
USB not detectedFormat/powerReformat USB to FAT32; use self-powered drive.

Reset: Unplug power for 60 seconds to reset player.

Service: 1-800-222-7669; www.sony.com/support

Sony DVP-SR170 Manual © - All Rights Reserved 2025