Sony DVP-SR200P Manual

The Sony DVP-SR200P is a standard DVD player designed for reliable playback of DVDs and CDs. It features a compact design, compatibility with multiple disc formats, progressive scan output for enhanced picture quality, HDMI connectivity for digital audio/video, and a simple user interface. Below are key sections covering safety, features, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit, Remote Control (RMT-D197P), Batteries, AC power cord, Quick Setup Guide.

Feature	Description
Disc Compatibility	DVD-Video, DVD-R/RW, DVD+R/RW, CD, CD-R/RW
Video Output	HDMI, Composite Video, Component Video (Y/Pb/Pr)
Audio Output	HDMI, Optical Digital, Analog Stereo (L/R)
Progressive Scan	Provides sharper picture quality on compatible TVs
Playback Modes	Repeat, Shuffle, Program Play, Slow Motion, Zoom
Parental Control	Allows restriction of disc playback based on ratings
Front Panel Controls	POWER, OPEN/CLOSE, PLAY, STOP, SKIP
Remote Control	Includes all essential playback and menu navigation buttons
Display	Front panel LED display for status and track/time info
Power Requirements	120V AC, 60Hz

Installation

Unpack and inspect all contents. Place the player on a stable, level surface near your TV.

1. Connect to TV: Use an HDMI cable (recommended) or composite/component video cables.
2. Connect Audio: If not using HDMI, connect audio cables (optical digital or analog stereo) to your TV or audio system.
3. Connect Power: Plug the AC power cord into a standard 120V wall outlet.
4. Insert Batteries: Install two AAA batteries into the remote control.

WARNING! Ensure proper ventilation; do not block vents on the sides or rear of the unit.

First-Time Setup

Power on the player and your TV. Select the correct input source on your TV (e.g., HDMI 1).

1. Initial Screen: The Sony logo or setup menu may appear on first use.
2. Language Setup: Use the remote to select your preferred menu language (default is ENGLISH).
3. TV Type: Set the TV screen format (4:3 or 16:9) to match your television.
4. Audio Output: Configure audio settings (e.g., Dolby Digital, DTS) based on your audio system.
5. Progressive Scan: Enable if your TV supports it for better picture quality.

CAUTION! Handle discs by the edges; avoid touching the playback surface.

Specifications

• Disc Types: DVD, CD, MP3 CD, JPEG CD.
• Video DAC: 10-bit/54 MHz.
• Audio DAC: 24-bit/192 kHz.
• Output Resolution: 480i, 480p (via HDMI/Component).
• Frequency Response: 4 Hz - 22 kHz (CD).
• Signal-to-Noise Ratio: >115 dB.
• Dynamic Range: >100 dB.
• Power Consumption: Approx. 8 W (operation), < 0.5 W (standby).
• Dimensions (W x H x D): Approx. 17" x 2" x 8.5".
• Weight: Approx. 3.1 lbs.

Controls and Settings

Access the main menu by pressing the HOME or MENU button on the remote.

Remote: POWER, OPEN/CLOSE, Numeric buttons, PLAY, PAUSE, STOP, SKIP (PREV/NEXT), MENU, HOME, OPTIONS, AUDIO, SUBTITLE, DISPLAY.

Settings Menu: Language, Display (TV Type, Screen Saver), Audio (Dynamic Range, Downmix), Parental Control, System (HDMI Setup, Reset).

Playback Functions: Repeat (Title/Chapter/Track), Program Play, Shuffle, Slow Motion (Forward/Reverse), Zoom (2x, 4x), Angle (for multi-angle DVDs).

Connecting to Your TV

For best quality, use an HDMI connection. Alternative connections include Component Video or Composite Video.

1. Turn off all devices before making connections.
2. HDMI: Connect one end to the player's HDMI OUT, the other to your TV's HDMI IN.
3. Component Video: Connect the Y, Pb, Pr cables (green, blue, red) to corresponding inputs on your TV.
4. Composite Video: Connect the yellow video cable to the VIDEO IN on your TV.
5. Audio: Connect red/white audio cables or an optical digital cable to your TV or sound system.
6. Power on devices and select the correct input on your TV.

Tip: Use high-quality cables for optimal video and audio performance.

Playing Discs

Supports DVD-Video, Video CD, Audio CD, MP3, JPEG.

1. Insert Disc: Press OPEN/CLOSE, place disc label-side up in the tray, press OPEN/CLOSE again to close.
2. Start Playback: Press PLAY. For DVDs, the main menu may appear—use arrow keys and ENTER to select.
3. Navigation: Use SKIP (PREV/NEXT) to jump chapters/tracks; use arrow keys for menu navigation.
4. Special Modes: Press REPEAT to cycle repeat modes; press SHUFFLE for random play (CD/MP3).
5. Search: Press SEARCH or SCROLL during playback to fast-forward or rewind.
6. Stop: Press STOP once to pause playback (resume with PLAY); press twice to stop completely.
7. Eject: Press OPEN/CLOSE to remove the disc.

WARNING! Do not move the player while a disc is spinning. Do not use damaged or irregularly shaped discs.

Parental Controls

Set a password to restrict playback of DVDs based on ratings (e.g., G, PG, PG-13, R).

1. Access Setup: Press MENU, navigate to "Settings" > "Parental Control".
2. Set Password: Default password may be 0000. Change to a 4-digit code of your choice.
3. Set Level: Choose the maximum allowed rating. Discs above this rating will require the password to play.
4. Lock/Unlock: The control can be turned ON or OFF with the password.

Care & Maintenance

Unplug the player from the AC outlet before cleaning. Use a soft, dry cloth to wipe the cabinet. For stubborn stains, dampen the cloth slightly with water; do not use solvents.

Clean discs with a soft, lint-free cloth, wiping from center to edge. Do not use abrasive cleaners.

CAUTION! Never open the cabinet. Refer servicing to qualified personnel only.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. Copyright © Sony Corporation. All trademarks are the property of their respective owners. Macrovision anti-copy protection is incorporated. For product support, visit www.sony.com/electronics/support or call 1-800-222-SONY.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure power cord is securely plugged into the player and wall outlet.
No picture	Incorrect TV input or cable	Select correct input on TV; check cable connections; try a different cable.
No sound	Audio settings or mute	Check audio output settings; ensure TV/amplifier is not muted; verify audio cables.
Disc won't play	Disc dirty/incompatible	Clean disc; ensure disc type is supported (see Specifications).
Remote not working	Batteries/obstruction	Replace batteries; ensure clear path to player's IR sensor; operate within 23 feet.
Playback skips	Disc dirty/scratched	Clean disc; if scratched, may not play properly.
HDMI no signal	HDMI handshake issue	Turn off TV and player, then power on TV first, then player. Try a different HDMI port.

Reset: If problems persist, unplug the player for 2 minutes, then reconnect. Use "Factory Reset" in the System menu as a last resort.

Service: For further assistance, contact Sony Customer Support at 1-800-222-SONY or visit www.sony.com/support.