Sony DVP-SR300 Manual

The Sony DVP-SR300 is a progressive scan DVD player with HDMI output, supporting DVD-Video, DVD-R/RW, DVD+R/RW, CD, CD-R/RW, and MP3 playback. It features 1080p upscaling via HDMI, Dolby Digital and DTS output, parental controls, and a sleek, compact design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit, Remote Control (RMT-D197A), Batteries, AC power cord, Quick Setup Guide.

Feature	Description
HDMI Output	For high-quality digital video and audio connection to HDTV
Component Video Output	For progressive scan video connection
Composite Video Output	For standard video connection
Digital Audio Output (Coaxial)	For Dolby Digital/DTS audio to AV receiver
Analog Audio Outputs (L/R)	For stereo audio connection
USB Port	For playback of JPEG/MP3 files from USB storage
POWER	Turns player on/off
OPEN/CLOSE	Opens and closes disc tray
PLAY/PAUSE	Starts playback or pauses
STOP	Stops playback

Installation

Unpack and inspect contents. Place on stable, level surface.

1. Connect to TV: Use HDMI cable for best quality (recommended), or Component/Composite video cables.
2. Connect to Audio System: Use digital coaxial cable to AV receiver, or analog audio cables to TV/amplifier.
3. Connect USB device: Insert USB storage into front panel port for photo/music playback.
4. Plug AC power cord into wall outlet.

WARNING! Ensure proper ventilation; do not block vents. Keep away from heat sources and moisture.

First-Time Setup

Power on player and TV; follow on-screen prompts.

1. Select Language: Use SETUP menu to choose OSD language (ENGLISH default).
2. Set TV Type: Choose 4:3 or 16:9 screen aspect ratio.
3. Configure Audio: Set Digital Output (PCM, Bitstream), Dynamic Range Compression.
4. Set Parental Control: Enter password (default 0000) to set movie rating limit.
5. HDMI Settings: Select resolution (Auto, 480p, 720p, 1080i, 1080p).

CAUTION! Handle discs by edges; do not touch playback surface.

Specifications

• Disc Compatibility: DVD-Video, DVD-R/RW (Video/VR), DVD+R/RW, CD-DA, CD-R/RW, MP3 CD, JPEG CD.
• Video Output: HDMI (up to 1080p), Component (480i/480p), Composite (480i).
• Audio Output: Dolby Digital, DTS, PCM (2ch/5.1ch).
• USB Playback: JPEG image files, MP3 audio files.
• Parental Control: DVD rating (1-8), custom password.
• Power Requirements: 120V AC, 60Hz, 9W.
• Dimensions (W x H x D): 17" x 1 5/8" x 8 5/8".
• Operating Temperature: 41°F to 95°F (5°C to 35°C).

Controls and Settings

Access OSD via SETUP button on remote. Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP/SEARCH, MENU, TITLE, SETUP, AUDIO, SUBTITLE, ANGLE.

Setup Menu: Language, Screen (Aspect Ratio, TV Type), Audio (Digital Out, DRC), Parental (Password, Level), HDMI (Resolution). Playback Settings: Repeat (Title/Chapter/Track), Zoom (2x, 4x), Display (On-Screen Info).

Connecting Devices

HDMI: Single cable for video/audio to HDTV. Component: Y Pb Pr cables for progressive scan. Composite: Video (yellow) + Audio (red/white). Audio: Coaxial digital to receiver.

1. Turn off all devices before connecting cables.
2. Match cable colors to jacks (red/white for audio, etc.).
3. Select correct input on TV (e.g., HDMI 1, Video 1).
4. Power on devices in order: TV, Audio System, then DVD player.

Tip: Use high-speed HDMI cable for 1080p signal.

Playing Media

Supports DVD, CD, MP3, JPEG formats.

1. Insert disc: Press OPEN/CLOSE, place disc label-side up, close tray.
2. Play: Press PLAY; disc menu may appear—use arrow buttons to navigate.
3. Skip/Search: Press NEXT/PREV to skip chapters; hold for fast search.
4. Pause/Still: Press PAUSE; press again to resume.
5. Stop: Press STOP; press PLAY to resume from stop point (if resume enabled).
6. Repeat: Press REPEAT to cycle through chapter/title/disc repeat.
7. Zoom: Press ZOOM during playback to magnify picture.
8. USB Playback: Insert USB device, select USB from home menu, navigate files with arrow buttons.

WARNING! Do not move player during disc playback. Do not use damaged or irregular discs.

Accessibility Features

Subtitle Selection: Press SUBTITLE during playback to cycle available languages. Audio Track: Press AUDIO to select alternate language/dub. Parental Control: Restrict playback based on movie rating (set in SETUP menu).

Care & Cleaning

Unplug from outlet before cleaning. Wipe cabinet with soft, dry cloth. Clean lens only with approved CD/DVD lens cleaner.

CAUTION! Do not use solvents, abrasives, or spray cleaners. Avoid magnetic fields near player.

Regulatory Information

FCC Part 15 Class B compliant. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Sony Corporation. Trademarks are property of their respective owners. Macrovision copy protection technology incorporated. For support, visit www.sony.com/dvdsupport or call 1-800-222-SONY.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord not connected	Ensure AC cord is firmly plugged into outlet and player.
No picture	Input selection/Cables	Select correct input on TV; check cable connections; try different HDMI port.
No sound	Audio settings/Cables	Check audio output settings (PCM/Bitstream); ensure cables connected securely.
Disc won't play	Disc format/Damage	Ensure disc is compatible and inserted correctly; clean disc; check for scratches.
Remote not working	Batteries/Obstruction	Replace batteries; point remote at sensor; remove obstacles.
USB not recognized	Format/Connection	Ensure USB is FAT32 formatted; reconnect device; check for compatible files.

Reset: Unplug power cord for 1 minute, then reconnect to reset system.

Service: 1-800-222-SONY; www.sony.com/dvdsupport