Sony DVPNS77H - DVP DVD Player Manual

The Sony DVPNS77H is a versatile DVD player featuring progressive scan output, multi-format playback (DVD-Video, DVD-R/RW, DVD+R/RW, CD, CD-R/RW, MP3, JPEG), component video output, Dolby Digital and DTS compatibility, parental controls, zoom and slow-motion functions, and a sleek, compact design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to TV and Audio System 7. Playing Discs 8. Advanced Playback Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit, Remote Control (RMT-D197A), Batteries, Audio/Video cable, Power cord, User Manual.

FeatureDescription
Progressive Scan OutputDelivers high-quality, flicker-free images on compatible TVs
Multi-Format PlaybackPlays DVD, CD, MP3, and JPEG formats
Component Video OutputFor superior picture quality (Y, Pb, Pr)
Audio OutputsCoaxial digital, optical digital, and analog stereo
Parental ControlRestricts playback of specific-rated discs
Zoom & Slow MotionAllows detailed viewing and frame-by-frame advance
OPEN/CLOSEEjects and closes the disc tray
PLAY/PAUSEStarts playback or pauses the current disc
STOPStops playback
POWERTurns the player on/off

Installation

Unpack and inspect all contents. Place the player on a stable, level surface near your TV and audio system.

  1. Connect to TV: Use the provided composite A/V cable (yellow for video, red/white for audio) or for better quality, use component video cables (green, blue, red) and separate audio cables.
  2. Connect to Audio System: Use the coaxial or optical digital audio cable to your receiver for Dolby Digital/DTS sound.
  3. Connect Power: Plug the AC power cord into a standard 120V AC outlet.
  4. Insert Batteries: Install two AA batteries into the remote control.

WARNING! Ensure proper ventilation; do not block vents on the sides and rear of the unit.

First-Time Setup

Power on the player and your TV. Set your TV to the correct video input (e.g., VIDEO 1, COMPONENT).

  1. Initial Language Setup: The on-screen menu will prompt you to select a language for menus and on-screen displays.
  2. TV Type: Set the TV screen aspect ratio (4:3 or 16:9) to match your television.
  3. Progressive Scan: Enable Progressive Scan output if your TV supports it for the best picture quality.
  4. Audio Settings: Configure digital audio output format (PCM or Bitstream) based on your audio system's capabilities.

CAUTION! Handle discs by the edges to avoid fingerprints and scratches.

Specifications

Controls and Settings

Access the Setup Menu by pressing the SETUP button on the remote. Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, MENU, SETUP, AUDIO, SUBTITLE, ANGLE, ZOOM, SEARCH modes.

Setup Menu Options: Language (Menu, Audio, Subtitle, Disc), Screen (TV Type, Display Mode, Progressive Scan), Audio (Digital Output, DRC), Parental Control (Level, Password default 0000), Custom Setup (Background, Screen Saver).

Connecting to TV and Audio System

For optimal performance, use the highest quality connection your equipment supports.

  1. Best Picture (HDTVs): Use Component Video cables (Y, Pb, Pr).
  2. Standard Picture: Use S-Video or Composite (yellow) cable.
  3. Best Audio (Home Theater): Use a Coaxial or Optical digital audio cable to your AV receiver.
  4. Standard Audio: Use the red and white analog audio cables to your TV or stereo.

Tip: Ensure all devices are powered off before making or changing connections.

Playing Discs

Supports a wide range of disc formats including DVD, CD, and recorded media.

  1. Insert disc: Press OPEN/CLOSE, place disc label-side up in the tray, press OPEN/CLOSE again.
  2. Play: Press PLAY. For DVDs, the main menu may appear—use arrow keys and ENTER to navigate.
  3. Navigate: Use PREV/NEXT to skip chapters/tracks. Use the SEARCH buttons (<<, >>) for fast forward/rewind.
  4. Pause/Still: Press PAUSE. Use the STEP button while paused to advance frame-by-frame.
  5. Stop: Press STOP. Press PLAY to resume from the stop point (if disc supports resume).
  6. Eject: Press OPEN/CLOSE to remove the disc.

WARNING! Do not move the player while a disc is spinning. Do not use damaged or irregularly shaped discs.

Advanced Playback Features

Zoom: Press ZOOM repeatedly to cycle through magnification levels (x2, x4). Use arrow keys to pan the zoomed area. Slow Motion: Press SLOW during playback. Multiple Angles: If available on a DVD, press ANGLE to switch camera angles. Repeat: Press REPEAT to repeat a title, chapter, track, or disc. Program Play: Create a custom play sequence from a CD or MP3 disc using the PROGRAM function in the menu.

Care & Maintenance

Unplug the player from the AC outlet before cleaning. Use a soft, dry cloth to wipe the cabinet. For stubborn stains, use a cloth slightly dampened with a mild detergent solution.

CAUTION! Never use solvents such as benzene or thinner. Do not allow liquid to enter the ventilation slots or disc tray.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © Sony Corporation. Macrovision: This product incorporates copyright protection technology. For customer support, visit www.sony.com/support or contact Sony Customer Information Center at 1-800-222-7669.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord not connectedEnsure the power cord is firmly plugged into the player and the AC outlet.
No pictureIncorrect TV inputSelect the correct video input on your TV (e.g., VIDEO 1, COMPONENT).
No soundAudio cables/MuteCheck audio connections. Ensure the player or your TV/receiver is not muted.
Disc will not playDisc dirty/incompatibleClean the disc. Ensure the disc format is supported (see Specifications).
Remote doesn't workBatteries/obstructionReplace remote batteries. Ensure nothing is blocking the remote sensor on the player.
Progressive Scan issuesTV incompatibilityDisable Progressive Scan in the Setup Menu if your TV does not support it.

Reset: Unplug the player from the AC outlet for 1 minute to reset the microprocessor.

Service: For service, contact an authorized Sony service facility. Do not open the cabinet as it may expose you to dangerous voltages.

Sony DVPNS77H - DVP DVD Player Manual © - All Rights Reserved 2025