Sony HCD-WZ8D Manual

The Sony HCD-WZ8D is a compact audio system featuring a 3-disc CD changer, AM/FM tuner, cassette deck, and integrated speakers. It includes Dolby B noise reduction, 30 station presets, digital tuning, sleep timer, and various playback modes. Powered by 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 3-disc CD changer, Cassette deck, AM/FM tuner, Remote Control, Speaker terminals, AUX input, Headphone jack.

Feature	Description
3-disc CD changer	Play up to three CDs continuously
Cassette deck	Record/playback with Dolby B NR
AM/FM tuner	Digital tuning with 30 presets
Remote control	Full function remote included
Speaker terminals	For connecting left/right speakers
AUX input	For external audio sources
Headphone jack	For private listening
AC input connector	For power connection
Sleep timer	Auto power off after set time
Display dimmer	Adjust display brightness

Installation

Unpack and inspect contents. Place on stable, level surface.

1. Connect speakers: Match red/black terminals to speaker wires (red to +, black to -).
2. Connect antenna: Attach AM loop antenna and FM wire antenna.
3. Connect external devices: Use AUX input for MP3 players or other audio sources.
4. Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block vents. Keep away from heat sources.

First-Time Setup

Power on system; follow initial setup procedure.

1. Set clock: Press CLOCK button and set current time.
2. Tune stations: Use AUTO PRESET to scan and store AM/FM stations.
3. Adjust sound: Use BASS/TREBLE controls or select sound mode.
4. Test functions: Verify CD, cassette, and tuner operation.

CAUTION! Handle discs and cassettes carefully; avoid touching playing surfaces.

Specifications

• CD System: 3-disc changer, CD-R/RW compatible.
• Tuner: AM/FM with 30 presets (20 FM, 10 AM).
• Cassette: Auto-reverse, Dolby B noise reduction.
• Output Power: 20W per channel (RMS).
• Terminals: Speaker outputs, AUX input, headphone jack.
• Playback Modes: Random, repeat, program play.
• Supported formats: Audio CD, CD-R/RW.
• Power Source: 120V AC, 60Hz.
• Dimensions: Compact shelf system design.

Controls and Settings

Front Panel: POWER, OPEN/CLOSE (CD), EJECT (cassette), TUNING/BAND, VOLUME, FUNCTION selector.

Remote: POWER, Numeric buttons, OPEN/CLOSE, FUNCTION, VOLUME, MUTE, PRESET, DISPLAY, SLEEP.

Sound: BASS, TREBLE, LOUDNESS, SOUND MODE (ROCK, POP, JAZZ, CLASSIC). Tuner: AUTO PRESET, MANUAL TUNE, PRESET MEMORY. CD: PLAY, STOP, PAUSE, SKIP, RANDOM, REPEAT. Cassette: PLAY, REC, STOP, FF, REW, DOLBY NR.

Connecting Devices

AUX input: For external audio sources. Headphone: 3.5mm jack for private listening.

1. Turn off system before connecting devices.
2. Connect audio cable from device to AUX input.
3. Select AUX function on main unit or remote.
4. Adjust volume on both system and source device.

Tip: Use quality cables for best audio performance.

Playing CD Media

Supports audio CDs, CD-R, CD-RW.

1. Load discs: Press OPEN/CLOSE, place up to 3 CDs in magazine.
2. Play: Press PLAY; select disc with DISC 1-3 buttons.
3. Stop: Press STOP; eject magazine with OPEN/CLOSE.
4. Skip: PREV/NEXT for tracks.
5. Random/Repeat: Press RANDOM or REPEAT during play.
6. Program: Press PROGRAM to create custom play sequence.
7. Display: Shows track number, elapsed time, disc number.
8. Resume: System remembers stop position for each disc.

WARNING! Do not expose discs to direct sunlight or heat. Handle by edges only.

Cassette Deck Operation

Auto-reverse playback, recording capability.

1. Insert cassette: Press EJECT, insert cassette label side out.
2. Playback: Press PLAY; auto-reverses at tape end.
3. Recording: Press REC + PLAY simultaneously; use Dolby NR for better quality.
4. Fast wind: FF/REW for quick positioning.
5. Dolby NR: Reduces tape hiss during playback/recording.

Note: Use Type I (normal) tapes. Recording automatically stops at tape end.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. Clean tape heads periodically with head cleaning cassette.

CAUTION! Never use solvents or abrasives. Keep magnets away from system.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Sony Corporation. For support, visit www.sony.com/audio or contact Sony Customer Support at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet.
No sound from speakers	Connections/volume	Verify speaker wires connected properly; check volume level.
CD won't play	Disc/dirty lens	Clean disc; use CD lens cleaner if needed.
Poor radio reception	Antenna placement	Extend FM antenna fully; reposition AM loop.
Cassette won't record	Tab/settings	Ensure record tab intact; press REC+PLAY together.
Remote not working	Batteries/obstruction	Replace batteries; point directly at sensor.

Reset: Unplug for 1 minute to reset microprocessor.

Service: 1-800-222-7669; www.sony.com/audio