Sony HT-5950DP Manual

The Sony HT-5950DP is a 5.1 channel home theater system with Dolby Digital and DTS decoding, 1000W total power output, 4K HDR pass-through, Bluetooth connectivity, NFC one-touch pairing, USB playback, FM tuner, and multiple HDMI inputs. It features a wireless subwoofer, easy setup, voice enhancement technology, and multiple sound modes. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Bluetooth & USB Playback 8. Sound Modes & Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: AV Receiver, 5 Satellite Speakers, Wireless Subwoofer, Remote Control, HDMI cables, FM antenna.

Feature	Description
HDMI Inputs (4 ports)	For connecting 4K Blu-ray players, gaming consoles, set-top boxes
HDMI Output (ARC)	Audio Return Channel for TV audio playback
Bluetooth with NFC	Wireless audio streaming from smartphones/tablets
USB Port	Playback of MP3, WMA, AAC audio files
FM Tuner	Built-in radio with preset memory
Wireless Subwoofer	Powerful bass without cable clutter
Voice Enhancement	Clarifies dialogue in movies/TV shows
Sound Modes	CINEMA, MUSIC, GAME, SPORTS, NIGHT
Auto Calibration	Microphone-based speaker setup for optimal sound
Remote Control	Full system control with backlit buttons

Installation

Unpack and inspect all components. Place AV receiver in well-ventilated area.

Position speakers: Front L/R beside TV, Center below TV, Surround L/R behind listening area.
Connect speakers: Use color-coded cables to matching terminals on receiver.
Place wireless subwoofer: Within 10m of receiver, away from walls for optimal bass.
Connect HDMI devices: Use HDMI cables from sources to receiver inputs.
Connect TV: HDMI OUT (ARC) to TV's HDMI ARC port.
Plug into AC power.

WARNING! Ensure proper ventilation around receiver. Do not block vents.

First-Time Setup

Power on system; follow on-screen prompts if connected to TV.

Auto calibration: Connect calibration microphone, press AUTO CAL on remote.
Set input assignments: Assign HDMI inputs to specific devices (BD, GAME, SAT/CABLE).
Configure Bluetooth: Enable BT pairing mode, connect smartphone via NFC or manual pairing.
Set FM presets: Tune to stations, save to memory buttons.
Adjust basic settings: Volume, input selection, sound mode.

CAUTION! Keep speakers away from moisture and heat sources.

Specifications

Audio Channels: 5.1 channels (Front L/R, Center, Surround L/R, Subwoofer).
Total Power Output: 1000W RMS.
Audio Formats: Dolby Digital, DTS, AAC, MP3, WMA.
Video Support: 4K/60p HDR pass-through, Dolby Vision.
Connectivity: HDMI (4 in/1 out ARC), USB, Bluetooth 4.2, NFC, FM antenna.
Speaker Impedance: 6 ohms.
Power Requirements: 120V AC, 60Hz.
Operating Temperature: 41°F to 95°F (5°C to 35°C).

Controls and Settings

Front Panel: POWER, INPUT SELECTOR, VOLUME KNOB, USB PORT, DISPLAY.

Remote: POWER, INPUT SELECT (TV, BD, GAME, SAT/CABLE, USB, BT), VOLUME, MUTE, SOUND MODE, VOICE ENHANCE, NIGHT MODE, SETUP MENU.

Setup Menu: Speaker Configuration (size/distance), HDMI Settings (CEC, ARC), Audio Settings (Dynamic Range), Bluetooth Pairing, FM Tuner Setup. Sound Modes: CINEMA (surround emphasis), MUSIC (stereo enhancement), GAME (spatial audio), SPORTS (crowd atmosphere), NIGHT (compressed dynamic range).

Connecting Devices

HDMI: Primary connection for modern devices. Optical Audio: Alternative for older TVs without ARC.

Turn off all devices before connecting.
Use high-speed HDMI cables for 4K HDR devices.
Assign inputs in setup menu for easy selection.
For TV audio: Enable HDMI CEC and ARC in both receiver and TV settings.

Tip: Label HDMI cables for easy identification of connected devices.

Bluetooth & USB Playback

Supports wireless streaming and local USB media playback.

Bluetooth pairing: Press BT button on remote, select "HT-5950DP" on your device.
NFC pairing: Tap NFC-enabled device to receiver's NFC mark.
USB playback: Insert USB drive, select USB input, navigate folders with arrow buttons.
Playback controls: PLAY/PAUSE, SKIP, REPEAT, SHUFFLE available via remote.
Disconnect Bluetooth: Hold BT button for 3 seconds or disable from source device.

WARNING! Do not remove USB drive during playback. Format USB as FAT32 for compatibility.

Sound Modes & Features

Voice Enhancement: Boost dialogue clarity (3 levels). Night Mode: Reduce loud sounds for late-night viewing. Auto Calibration: Optimizes speaker levels and distance automatically.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for receiver and speakers. For stubborn stains, dampen cloth slightly with water only.

CAUTION! Do not use chemicals or abrasive cleaners. Keep liquids away from electronic components.

Regulatory Information

FCC Part 15: Class B digital device compliant. ICES-003: Canada compliance. Manufactured under license from Dolby Laboratories. DTS and the DTS logo are registered trademarks. For support, visit www.sony.com/electronics/support or contact 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Input selection/volume	Select correct input; increase volume; check speaker connections.
Subwoofer not working	Power/wireless connection	Ensure subwoofer is powered on; re-pair with receiver (pair button).
Bluetooth connection fails	Distance/interference	Move devices closer; turn off other Bluetooth devices; restart pairing.
No 4K HDR video	HDMI cable/settings	Use certified high-speed HDMI cable; enable enhanced format in TV settings.
Remote not responding	Batteries/obstructions	Replace batteries; ensure clear line of sight to receiver IR sensor.

Reset: Hold POWER + INPUT SELECT for 5 seconds to factory reset.

Service: 1-800-222-7669; www.sony.com/electronics/support