SONY HT-6900DP Manual

The SONY HT-6900DP is a high-performance 5.1 channel Dolby Digital/DTS home theater system with 1000W total power output, wireless rear speakers, Bluetooth connectivity, 4K HDR pass-through, HDMI ARC/eARC support, USB playback, and voice enhancement technology. It features a dedicated subwoofer, multiple sound modes (Cinema, Music, Game, Night), and easy setup with Digital Cinema Auto Calibration. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: AV Receiver, 5 Satellite Speakers, Wireless Rear Speaker Transmitter, Powered Subwoofer, Remote Control, HDMI cables, Speaker wires.

Feature	Description
Wireless Rear Speakers	2.4GHz wireless transmission for rear channels
Bluetooth Connectivity	Stream audio from smartphones/tablets
HDMI 2.1 (4K/120Hz)	3 Inputs, 1 Output with ARC/eARC
Digital Cinema Auto Calibration	Automatic speaker setup with included microphone
Sound Modes	Cinema, Music, Game, Night, Voice
USB Playback	Supports MP3, WMA, AAC, FLAC
Optical/Coaxial Inputs	For TV and digital audio sources
Headphone Jack	3.5mm for private listening
Power Output	1000W Total (Front: 150W x2, Center: 150W, Rear: 100W x2, Sub: 350W)
Supported Formats	Dolby Digital, DTS, Dolby TrueHD, DTS-HD Master Audio

Installation

Unpack and verify all components. Choose optimal placement for speakers.

1. Position speakers: Front L/R beside TV, Center below/above TV, Rear L/R behind seating area.
2. Connect speakers: Use color-coded wires to matching terminals on receiver.
3. Connect subwoofer: Plug power cord; connect RCA cable to SUB OUT on receiver.
4. Connect TV: Use HDMI ARC cable from receiver's HDMI OUT (ARC) to TV's HDMI ARC port.
5. Connect power: Plug receiver and subwoofer into AC outlets.

WARNING! Ensure proper ventilation around receiver; do not block vents. Speaker wires should not be pinched.

First-Time Setup

Power on system; follow on-screen prompts if connected via HDMI.

1. Auto Calibration: Connect calibration microphone to MIC port; run Auto Calibration from menu.
2. Input assignment: Assign HDMI/Optical inputs to specific sources (Blu-ray, Game, etc.).
3. Wireless pairing: Power on rear speakers; they automatically pair with transmitter.
4. Bluetooth pairing: Press BT PAIR on remote; select "HT-6900DP" on your device.
5. Sound mode selection: Choose preferred mode (Cinema recommended for movies).

CAUTION! Keep magnetic devices away from speakers. Do not place objects on top of receiver.

Specifications

• Audio Channels: 5.1 channels (Front L/R, Center, Rear L/R, Subwoofer).
• Total Power Output: 1000W RMS.
• Wireless Technology: 2.4GHz for rear speakers; Bluetooth 5.0.
• HDMI: 3 Inputs, 1 Output with ARC/eARC, 4K/120Hz, HDR10+, Dolby Vision.
• Audio Formats: Dolby Digital, DTS, Dolby TrueHD, DTS-HD Master Audio, AAC, LPCM.
• Frequency Response: 20Hz–20kHz.
• Inputs/Outputs: HDMI, Optical, Coaxial, USB, Analog Audio, Headphone.
• Power Supply: 120V AC, 60Hz.
• Dimensions (Receiver): 17.1" W × 6.3" H × 13.4" D.

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, SOUND MODE, BLUETOOTH.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SOUND MODE, SETUP, BLUETOOTH, NUMERIC, NAVIGATION.

Setup Menu: Speaker Configuration (Size/Distance/Level), Input Assign, HDMI Settings (ARC/CEC), Audio Settings (Dynamic Range, Lip Sync), Network Settings (Bluetooth). Sound Modes: Cinema (surround emphasis), Music (stereo enhancement), Game (spatial audio), Night (dynamic compression), Voice (dialogue boost).

Connecting Devices

HDMI Sources: Connect to HDMI IN 1/2/3. TV: HDMI OUT (ARC) to TV. Optical/Coaxial: For older TVs/audio sources.

1. Turn off all devices before connecting.
2. Use high-speed HDMI cables for 4K/HDR content.
3. Select input via INPUT button (HDMI1, HDMI2, HDMI3, OPT, COAX, BT).
4. Enable HDMI CEC on TV for single remote control.

Tip: Label cables for easy identification. Ensure HDMI ARC is enabled on TV.

Wireless & Network Features

Bluetooth Streaming: Pair device once; auto-reconnects.

1. Press BLUETOOTH on remote; "BT PAIRING" appears on display.
2. On device, select "HT-6900DP" from Bluetooth list.
3. Control playback (play/pause/skip) from remote or device.
4. Wireless Rear Speakers: Ensure transmitter is connected to REAR OUT; power on speakers (LED solid green indicates connection).
5. USB Playback: Insert USB drive; select USB input; navigate folders with remote.

WARNING! Keep wireless transmitter away from other 2.4GHz devices (Wi-Fi routers) to avoid interference.

Sound Modes & Calibration

Auto Calibration: Uses microphone to measure room acoustics; sets speaker levels/distances automatically. Manual Calibration: Adjust individual speaker levels (-10dB to +10dB), distance (1-30ft), crossover (80Hz-200Hz). Sound Modes: Cycle with SOUND MODE button; Cinema for movies, Music for stereo, Game for immersive gaming, Night reduces loud sounds, Voice enhances dialogue.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for receiver and speakers. For stubborn stains, dampen cloth slightly with water; do not use chemicals.

CAUTION! Do not allow liquids into vents or ports. Keep system away from heat sources and direct sunlight.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. ICES-003: Complies with Canadian EMI regulations. Copyright © 2023 Sony Corporation; trademarks owned by Sony Group Corporation. For support, visit www.sony.com/audio or contact 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from rear speakers	Wireless interference/power	Move transmitter away from Wi-Fi; ensure speakers powered on (green LED).
Bluetooth not connecting	Pairing mode/range	Enter pairing mode on receiver; ensure device within 33ft; remove obstacles.
HDMI ARC not working	CEC/ARC settings	Enable HDMI CEC & ARC on TV; use certified HDMI cable; power cycle devices.
Distorted sound	Speaker wires/overload	Check wires for fraying/loose connections; reduce volume; ensure proper ventilation.
Subwoofer no output	Power/cable	Check power LED; ensure RCA cable firmly connected to SUB OUT; adjust subwoofer level in menu.

Reset: Hold POWER + SOUND MODE for 5 seconds to factory reset.

Service: 1-800-222-7669; www.sony.com/audio