Sony HT-9900M Manual

The Sony HT-9900M is a high-performance 5.1 channel home theater system with 1000W total power output, 4K HDR pass-through, Bluetooth connectivity, NFC one-touch listening, USB playback, HDMI ARC, Dolby Audio and DTS Digital Surround support, wireless rear speakers, and a dedicated subwoofer. It features multiple sound modes, voice enhancement technology, and easy setup with auto calibration. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main soundbar unit, Wireless subwoofer, Two wireless rear speakers, Remote control, Power cables, Wall mount kit, HDMI cable.

Feature	Description
Total Power Output	1000W (Soundbar: 400W, Subwoofer: 400W, Rear speakers: 200W)
Audio Formats	Dolby Audio, DTS Digital Surround, AAC, MP3, WMA
Connectivity	HDMI ARC, Optical input, Bluetooth 5.0, NFC, USB port, 3.5mm AUX input
Video Pass-through	4K HDR, Dolby Vision, HDR10 compatible
Sound Modes	Cinema, Music, Game, Sports, Night, Voice
Wireless	Wireless subwoofer and rear speakers (2.4GHz connection)
Auto Calibration	Room calibration with included microphone
Voice Enhancement	Clear voice technology for dialogue clarity
Display	Front panel LED display with dimmer control
Remote Control	Full function remote with backlit buttons

Installation

Unpack and inspect all components. Choose placement location.

1. Position soundbar: Place below TV (table mount) or wall mount using included bracket.
2. Place subwoofer: Position near wall for optimal bass response (wireless connection).
3. Position rear speakers: Place behind listening area, connect to power outlets.
4. Connect to TV: Use HDMI ARC (recommended) or optical cable.
5. Connect power: Plug all components into AC power outlets.

WARNING! Ensure proper ventilation; do not block vents. Keep away from heat sources.

First-Time Setup

Power on system; follow on-screen prompts if TV supports HDMI-CEC.

1. Auto pairing: Turn on system - subwoofer and rear speakers pair automatically (LED indicators solid).
2. Connect to TV: Use HDMI ARC port for best audio synchronization.
3. Run auto calibration: Connect calibration microphone, press AUTO CAL button, follow tones.
4. Select input source: Press INPUT to cycle through HDMI, Bluetooth, USB, Optical, AUX.
5. Adjust settings: Use SOUND MODE to select preferred audio profile.

CAUTION! Do not place speakers near magnetic sources. Ensure stable power supply.

Specifications

• System Configuration: 5.1 channels (Soundbar: 3.0, Subwoofer: 1, Rear: 2).
• Total Power: 1000W RMS.
• Frequency Response: 35Hz - 20kHz.
• Bluetooth: Version 5.0, range up to 10m (33ft).
• HDMI: 2 in / 1 out (ARC), HDCP 2.2 compliant.
• Supported Formats: Audio: Dolby Digital, DTS, AAC, MP3, WMA, FLAC; Video: 4K/60p, HDR10, Dolby Vision.
• USB Playback: Supports MP3, WMA, AAC, WAV, FLAC up to 192kHz/24-bit.
• Power Requirements: 120V AC, 60Hz, 180W max.
• Dimensions: Soundbar: 39.4" W x 2.4" H x 4.3" D; Subwoofer: 11.8" W x 15.7" H x 11.8" D.

Controls and Settings

Front Panel: POWER, INPUT, VOLUME, BLUETOOTH PAIR, USB port, Display window.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SOUND MODE, NIGHT MODE, VOICE, BLUETOOTH, AUTO CAL, SUBWOOFER LEVEL, REAR LEVEL.

Sound Settings: Cinema (enhanced surround), Music (stereo expansion), Game (low latency), Sports (crowd emphasis), Night (compressed dynamic range), Voice (dialogue boost). Level Controls: Subwoofer (-6 to +6 dB), Rear speakers (-6 to +6 dB), Center channel adjustment. System: Auto standby, Display brightness, Factory reset, Software update via USB.

Connecting Devices

TV: HDMI ARC (recommended) or optical cable. Game consoles: HDMI input. Streaming devices: HDMI input. Audio sources: Bluetooth, USB, AUX.

1. Turn off all devices before connecting cables.
2. Use high-speed HDMI cables for 4K HDR content.
3. For optical connection, set TV audio output to PCM or Bitstream.
4. Select corresponding input on soundbar (HDMI, OPT, BT, USB, AUX).

Tip: Enable HDMI-CEC on TV for single remote control operation.

Bluetooth & USB Playback

Supports Bluetooth streaming from smartphones, tablets, computers. USB playback for audio files.

1. Bluetooth pairing: Press BLUETOOTH button, select "HT-9900M" on your device. For NFC, tap compatible device to NFC area.
2. USB playback: Insert USB drive, system auto-detects and plays compatible files.
3. Navigation: Use PREV/NEXT to skip tracks; PLAY/PAUSE to control playback.
4. Repeat/Shuffle: Press P.MODE during playback to cycle through repeat modes.
5. Bluetooth range: Maintain within 10m (33ft) without obstacles.
6. Multi-point: Connect two devices simultaneously; priority given to last active device.

WARNING! Eject USB drive properly using STOP function. Do not remove during playback.

Sound Modes & Features

Sound Modes: Optimize audio for different content types. Night Mode: Reduces loud sounds for late-night viewing. Voice Enhancement: Boosts dialogue frequencies. Auto Calibration: Analyzes room acoustics using included microphone.

Care & Cleaning

Unplug from power before cleaning. Use soft, dry cloth for exterior. For stubborn stains, dampen cloth with water only.

CAUTION! Do not use abrasive cleaners or solvents. Never spray liquids directly onto unit.

Regulatory Information

FCC Part 15: Class B digital device compliant. ICES-003: Canada compliance. This device complies with part 15 of the FCC Rules. Copyright © 2023 Sony Corporation. All trademarks are property of Sony Corporation. For support, visit www.sony.com/audio or contact Sony Customer Support at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from system	Input selection/power	Check input source matches connection; ensure all components powered on.
Subwoofer/rear speakers not working	Wireless connection	Repair by pressing LINK button on back of each speaker; check power.
Bluetooth connection issues	Range/interference	Move devices closer; clear paired devices list and re-pair; check Bluetooth is enabled on source.
HDMI ARC not working	TV settings/cable	Enable HDMI-CEC/ARC on TV; try different HDMI cable; ensure connected to ARC port.
Audio sync (lip sync) issues	Processing delay	Use AV SYNC adjustment in soundbar menu; set TV to Game Mode if available.
Distorted sound	Volume levels/source	Reduce volume; check audio source quality; ensure proper file format support.

Reset: Hold POWER + VOLUME DOWN on soundbar for 5 seconds to factory reset.

Service: 1-800-222-7669; www.sony.com/audio