Sony MDP-V9K Manual

The Sony MDP-V9K is a professional-grade Multi-Disc Player and Recorder designed for archival and playback of various optical media formats. It features high-speed recording, advanced error correction, compatibility with multiple disc types (CD, DVD, Blu-ray), digital audio outputs, RS-232C control, and robust construction for continuous operation. Below are key sections covering safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Multi-disc carousel mechanism, Front Control Panel, Remote Control Sensor, Digital Audio Outputs (Coaxial/Optical), RS-232C Port, LAN Port, USB Port for firmware updates.

Feature	Description
Multi-Disc Carousel	Holds up to 9 discs (CD/DVD/Blu-ray) for sequential or random playback
High-Speed Recording	Supports 4x DVD-R and 2x BD-R recording
Digital Audio Output	Coaxial and Optical (TOSLINK) for pristine audio signal
RS-232C Control Port	For integration into professional AV control systems
LAN Port	Network connectivity for control and firmware updates
USB Port	For service and firmware updates
POWER	Main power switch
OPEN/CLOSE	Opens the disc carousel door
STANDBY	Enters low-power standby mode
DISPLAY	Toggles front panel display information

Installation

Unpack the unit and inspect for shipping damage. Place on a stable, level surface with adequate ventilation.

1. Connect Power: Use the supplied power cord to connect to a grounded AC outlet (100-240V, 50/60Hz).
2. Connect Audio Output: Use digital coaxial or optical cable to connect to an AV receiver or amplifier.
3. Connect Control System: Use a standard RS-232 cable to connect to a control system (if applicable).
4. Connect Network: Use an Ethernet cable to connect to a local network for updates and control.

WARNING! This unit is heavy. Use two people for lifting and placement. Ensure the ventilation openings are not blocked.

First-Time Setup

Power on the unit using the rear power switch, then press STANDBY on the front panel or remote.

1. Initialize Carousel: The unit may perform an automatic initialization of the disc carousel.
2. Set Display Language: Press MENU, navigate to SYSTEM SETUP > LANGUAGE, select ENGLISH.
3. Configure Audio Output: In AUDIO SETUP, select the desired digital output format (PCM or Bitstream).
4. Set Clock: Navigate to SYSTEM SETUP > CLOCK to set the current date and time for accurate logging.
5. Network Configuration: If using LAN, configure IP settings in NETWORK SETUP (DHCP or Manual).

CAUTION! Do not open the disc carousel or attempt to insert discs during initialization.

Specifications

• Disc Capacity: 9 discs (CD, DVD, BD).
• Playback Formats: CD-DA, DVD-Video, BD-Video, MP3, WMA, JPEG (on CD/DVD).
• Recording Formats: DVD-R/RW, BD-R/RE.
• Video Output: HDMI (up to 1080p), Component, Composite.
• Audio Output: Digital Coaxial, Digital Optical, Analog Stereo (RCA).
• Control: Front panel, IR Remote, RS-232C, LAN (TCP/IP).
• Power Requirements: AC 100-240V, 50/60Hz.
• Operating Temperature: 41°F to 95°F (5°C to 35°C).
• Dimensions (W x H x D): 17.1" x 5.6" x 15.7" (Approx.).

Controls and Settings

Access the main menu via the MENU button on the remote or front panel. Front Panel: POWER, STANDBY, OPEN/CLOSE, NUMBER keys (1-9), PLAY, STOP, PAUSE.

Remote: POWER, Numeric keys, MENU, CURSOR (Up/Down/Left/Right), ENTER, RETURN, SUBTITLE, AUDIO, DISPLAY.

System Setup: Language, Clock, Network, Default Reset. Playback Setup: Repeat Mode (Disc/Track/All), Shuffle, Parental Control (password default: 0000). Recording Setup: Recording Quality (SP/LP/EP), Disc Finalization. Audio/Video Setup: HDMI Output Resolution, Digital Audio Output, Dynamic Range Control.

Connecting Devices

Audio/Video: Use HDMI for best quality, or Component/Composite video with analog/digital audio. Control: RS-232C or LAN.

1. Ensure all devices are powered off before making connections.
2. Connect HDMI cable from MDP-V9K HDMI OUT to the HDMI IN on your display or AV receiver.
3. For digital audio to a separate processor, connect Coaxial or Optical cable.
4. For system control, connect the RS-232C port to a compatible controller using a null-modem cable.
5. Power on devices in sequence: Display/Receiver first, then the MDP-V9K.

Tip: Use high-speed HDMI cables for reliable 1080p signal transmission.

Playing and Recording Media

Supports playback of CD, DVD, Blu-ray. Records to DVD and Blu-ray (blank media required).

1. Load Discs: Press OPEN/CLOSE, place up to 9 discs in the carousel slots, press OPEN/CLOSE again to close.
2. Select Disc: Use number keys (1-9) on remote or front panel to select a specific disc carousel slot.
3. Play: Press PLAY. Use SKIP (<< / >>) for previous/next chapter or track.
4. Recording: Insert a blank recordable disc. From the source (e.g., external input), press REC to start recording. Select quality in the menu beforehand.
5. Special Modes: Press REPEAT to cycle through repeat modes. Press SHUFFLE for random playback of all loaded discs.
6. Disc Info: Press DISPLAY to show title, chapter, elapsed time, and audio format.
7. Finalize Disc: After recording, finalize the disc in the RECORDING SETUP menu for playback in other devices.

WARNING! Do not move the unit while discs are spinning. Use only recommended blank media. Ensure discs are clean and free of scratches.

Network and Control Features

RS-232C Control: Accepts standard Sony control commands for integration. LAN Control: Enable in NETWORK SETUP for IP-based control using specified protocols. Firmware Updates: Can be performed via network or USB drive (check Sony support website).

Care & Maintenance

Unplug the unit from the AC outlet before cleaning. Use a soft, dry cloth to wipe the exterior. For stubborn marks, lightly dampen the cloth with water. Do not use solvents.

Lens Cleaning: Use a commercially available CD/DVD lens cleaning disc if playback issues arise. Do not attempt to manually clean the laser lens.

CAUTION! Never use benzene, thinners, or other chemicals. Avoid placing the unit in humid, dusty, or extremely hot locations.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. ICES-003: Complies with Canadian ICES-003 Class B limits. Manufacturer: Sony Corporation. For product support, service locations, and the latest firmware, visit www.sony.com/electronics/support or contact Sony Customer Support at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not power on	Power cord, outlet, rear switch	Ensure power cord is securely connected, outlet is live, and rear power switch is ON.
No video/audio from HDMI	HDMI cable, input selection	Check HDMI cable connection. Ensure TV/Receiver is set to the correct HDMI input.
Disc cannot be read	Disc dirty/damaged, wrong format	Clean the disc. Ensure disc format is supported (e.g., not a computer data DVD-ROM).
Carousel does not open	Unit is in standby, mechanical issue	Wake unit from standby first. If problem persists, power cycle the unit. Do not force it open.
Network control not working	IP settings, cable, firewall	Verify NETWORK SETUP IP address. Check Ethernet cable. Disable firewall on control PC for testing.
Recording fails	Disc full, incompatible media, dirty lens	Use new blank disc of recommended brand/type. Try a lens cleaning disc.

Factory Reset: MENU > SYSTEM SETUP > DEFAULT SETTINGS > RESET (Note: This clears all custom settings).

Service: For issues not resolved above, contact Sony Customer Support at 1-800-222-7669 or visit www.sony.com/electronics/support.