sony MEXDV2200 - DVD-SACD-CD Receiver manual

The Sony MEXDV2200 is an in-dash DVD/SACD/CD receiver featuring a motorized detachable faceplate, built-in MOSFET 52W x 4 amplifier, DVD-Video playback, Super Audio CD (SACD) and CD compatibility, AM/FM tuner with 18FM/12AM presets, 5.1-channel Dolby Digital/DTS output capability, customizable display colors, and advanced audio controls including 3-band parametric EQ and time alignment. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Security Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motorized detachable faceplate, Built-in amplifier, DVD/SACD/CD mechanism, Remote control sensor, Preamp outputs, Antenna input.

FeatureDescription
Motorized Detachable FaceplateFaceplate automatically detaches for security when power is turned off
MOSFET Amplifier52W x 4 high-power output
DVD/SACD/CD PlaybackPlays DVD-Video, Super Audio CD, CD, CD-R/RW, MP3/WMA files
AM/FM Tuner18 FM and 12 AM station presets
5.1-Channel OutputDolby Digital and DTS decoder outputs for surround sound
Display CustomizationAdjustable display color and illumination patterns
Audio Controls3-band parametric equalizer, time alignment, loudness
Preamp OutputsFront, rear, subwoofer, and center channel outputs
Remote ControlIncluded wireless remote for full operation
Auxiliary InputFor connecting portable audio devices

Installation

Unpack and inspect contents. Ensure vehicle is parked with ignition off.

  1. Disconnect negative battery terminal: Prevent short circuits during installation.
  2. Remove existing radio: Use appropriate removal tools for your vehicle.
  3. Connect wiring harness: Match colors to vehicle wiring; use crimp connectors.
  4. Connect antenna: Plug vehicle antenna cable into receiver.
  5. Connect speakers and amplifiers: Use appropriate gauge wire for power and speakers.
  6. Secure receiver: Insert into dash opening and secure with mounting sleeve.
  7. Reconnect battery: Test all functions before final assembly.

WARNING! Professional installation recommended. Ensure proper fuse rating. Route wiring away from moving parts and heat sources.

First-Time Setup

Connect faceplate; turn on ignition to power unit.

  1. Set clock: Press and hold CLOCK button, use tuning knob to set time.
  2. Program radio stations: Tune to desired station, press and hold preset button.
  3. Adjust display: Use DISP button to cycle through color options.
  4. Configure audio settings: Access AUDIO menu to set EQ, balance, fader.
  5. Set security code: In SETUP menu, set 4-digit code for theft protection.
  6. Test all functions: Verify DVD, CD, radio, and auxiliary input operation.

CAUTION! Do not operate while driving. Park vehicle for initial setup.

Specifications

Controls and Settings

Access menus via FUNCTION button. Front Panel: POWER/VOLUME knob, SOURCE, OPEN/CLOSE, AUDIO, DISP, BAND.

Remote: POWER, Numeric buttons, OPEN/CLOSE, SOURCE, VOLUME, MUTE, MENU, AUDIO, DISP.

Audio Settings: 3-band parametric EQ (center frequency, bandwidth, gain), loudness, subwoofer level, time alignment, fader/balance. Radio: Manual/auto seek, local/distant reception, preset scan. Display: 7-color options, dimmer control. Setup: Clock, beep on/off, demo mode, security code, language. DVD/SACD: Parental lock, angle selection, subtitle, audio track.

Connecting Devices

Antenna: Standard vehicle antenna plug. Speakers: 4-8 ohm impedance. Amplifiers: Use RCA preamp outputs. Auxiliary: 3.5mm mini-jack input.

  1. Turn off vehicle ignition before connecting devices.
  2. Match speaker polarity (+ to +, - to -).
  3. Use high-quality RCA cables for amplifier connections.
  4. Select source via SOURCE button (DVD, CD, TUNER, AUX).

Tip: For 5.1 surround, connect all six preamp outputs to external amplifier.

Playing Media

Supports DVD-Video, SACD, CD, CD-R/RW with MP3/WMA.

  1. Insert disc: Press OPEN/CLOSE, load media label-side up.
  2. Play: Unit automatically begins playback; use SOURCE to select.
  3. Navigate: Use arrow buttons for menus; numeric buttons for direct track access.
  4. Stop: Press STOP; eject with OPEN/CLOSE.
  5. Skip: PREV/NEXT for tracks/chapters.
  6. Random/Repeat: Press RPT/RDM during playback.
  7. Fast Search: Press and hold FF/REW.
  8. MP3/WMA Navigation: Use folder/track navigation in menu.
  9. SACD Playback: Select stereo or multi-channel output in setup.

WARNING! Do not use damaged discs. Do not obstruct faceplate movement. Observe traffic laws; do not watch video while driving.

Security Features

Detachable Faceplate: Automatically detaches when ignition is turned off. Security Code: 4-digit code prevents unauthorized use if faceplate is stolen. Theft Deterrent LED: Blinking LED indicates active security.

Care & Cleaning

Disconnect battery before cleaning. Use soft, dry cloth for faceplate and display. For stubborn dirt, dampen cloth slightly with water only.

CAUTION! Do not use solvents, alcohol, or abrasive cleaners. Never spray liquids directly on unit. Store faceplate in protective case when detached.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for vehicular use. Copyright © Sony Corporation. Dolby Digital and DTS are trademarks of their respective owners. For support, visit www.sony.com/audio or contact 1-800-222-7669.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerWiring/security lockCheck fuse and connections; enter security code if displayed.
Faceplate not attachingObstructions/alignmentEnsure clear path; align properly and press firmly.
No sound from speakersSettings/wiringCheck audio settings; verify speaker connections and fader balance.
Disc not playingDisc format/damageEnsure disc is compatible format; clean disc; check for scratches.
Poor radio receptionAntenna connectionEnsure antenna plugged in securely; check antenna condition.
Remote not workingBatteries/obstructionReplace batteries; ensure line of sight to sensor on faceplate.
OverheatingVentilation/installationEnsure proper ventilation; check for obstructions around unit.

Reset: Disconnect battery for 1 minute to reset unit (note: security code required upon reconnect).

Service: 1-800-222-7669; www.sony.com/audio

sony MEXDV2200 - DVD-SACD-CD Receiver manual © - All Rights Reserved 2025