Sony RMT-D111E Manual

The Sony RMT-D111E is a universal remote control designed for use with various Sony audio/video equipment. It features infrared (IR) operation, a wide compatibility range with Sony TV, DVD, Blu-ray, and audio systems, programmable functions, learning capabilities for non-Sony devices, ergonomic button layout, battery-powered operation, and a simple setup process. Below are key sections for overview, features, setup, programming, operation, compatibility, maintenance, and troubleshooting.

Features at a Glance

Key components: Infrared transmitter, Mode selection buttons (TV, DVD, AUDIO, etc.), Power button, Navigation pad, Numeric keypad, Volume/Channel controls, Menu/Setup buttons, Learning sensor.

Feature	Description
Infrared Operation	Wireless control up to approx. 7 meters (23 feet)
Multi-Device Control	Controls up to 4 devices (TV, DVD, AUDIO, CABLE/SAT)
Pre-programmed Codes	Includes codes for major Sony and some non-Sony brands
Learning Function	Can learn commands from original remotes
Ergonomic Design	Comfortable grip and logically arranged buttons
Battery Powered	Uses 2 x AAA batteries (included)
Direct Code Entry	Allows manual entry of device codes
Macro Function (if supported)	Can execute multiple commands with one button
Backlight (if applicable)	Illuminates buttons in low light
Reset Function	Restores remote to factory default settings

Package Contents

Unpack and verify all items are present.

1. Sony RMT-D111E Remote Control (1 unit)
2. AAA Batteries (2 pieces)
3. User Manual (this document)
4. Quick Start Guide (optional)
5. Code List Sheet (for compatible devices)

WARNING! Keep batteries away from children and pets. If any item is missing or damaged, contact your retailer.

Initial Setup & Battery Installation

Prepare the remote for first use by installing batteries.

1. Turn the remote over and locate the battery compartment cover on the back.
2. Slide the cover in the direction of the arrow to open.
3. Insert two AAA batteries, observing the correct polarity (+/-) markings inside.
4. Close the battery compartment cover by sliding it back until it clicks into place.
5. Test the remote by pointing it at a compatible Sony device and pressing the POWER button for the corresponding mode (e.g., TV).

CAUTION! Do not mix old and new batteries or different battery types. Remove batteries if the remote will not be used for an extended period.

Specifications

• Model: RMT-D111E
• Power Source: 2 x AAA (1.5V) batteries
• Operating Range: Approx. 7 meters (23 feet), angle dependent
• Signal Type: Infrared (IR)
• Compatible Brands: Primarily Sony; limited codes for other major brands
• Controllable Devices: Up to 4 (TV, DVD/Blu-ray, Audio System, Cable/Satellite Box)
• Learning Capacity: Varies by button (consult manual for details)
• Dimensions: Approx. 180mm x 50mm x 25mm (L x W x H)
• Weight: Approx. 100g (including batteries)
• Operating Temperature: 0°C to 40°C (32°F to 104°F)

Controls & Button Layout

Top Section: Mode buttons (TV, DVD, AUDIO, CABLE/SAT). Center: Navigation pad (Up/Down/Left/Right, OK/ENTER), Menu, Guide, Info, Exit. Lower Section: Numeric keypad (0-9), Volume/Channel rockers, Mute, Input/Source, Power, Play/Pause, Stop, Skip, etc.

Key Functions: MODE buttons select which device to control. POWER turns selected device on/off. Numeric buttons directly enter channels. VOL +/- and CH +/- control volume and channels for the selected mode. NAVIGATION pad navigates on-screen menus. Special function buttons (like RED/GREEN/YELLOW/BLUE) may be used for interactive services.

Programming the Remote

To control a device, you must program the remote with the correct code for that device.

1. Turn on the device you want to control (e.g., your TV).
2. On the remote, press and hold the desired MODE button (e.g., TV) until the indicator light stays on.
3. Enter the 3-digit code for your device brand/model from the provided code list. The indicator light will blink twice if the code is accepted.
4. Point the remote at the device and press POWER. If the device turns off, programming is successful. If not, try the next code for your brand.
5. For Auto Search (if supported): Hold MODE button, then press and hold POWER while pointing at device. Release POWER when device turns off.

Tip: Keep the code list handy. Some devices may require trying multiple codes.

Using Learning Function

The remote can learn commands from your original remote for unsupported functions or non-Sony devices.

1. Place both remotes facing each other, about 2-3 cm apart.
2. On the RMT-D111E, press and hold the LEARN button (if dedicated) or follow the manual's sequence to enter learning mode (e.g., press MODE + SETUP until light blinks).
3. Press the button on the RMT-D111E you wish to program (e.g., a specific function key).
4. Immediately press and hold the corresponding button on the original remote until the RMT-D111E's indicator light blinks twice (signaling learned).
5. Repeat for other buttons. Exit learning mode as per manual instructions.

WARNING! Ensure a stable environment without strong IR interference. Some buttons (like POWER) may not be learnable.

Operating Your Devices

Once programmed, use the remote to control your equipment.

1. Select Mode: Press TV, DVD, AUDIO, or CABLE/SAT to control that specific device.
2. Basic Control: Use POWER, VOLUME, CHANNEL, MUTE, INPUT for the selected device.
3. Menu Navigation: Use the NAVIGATION pad and ENTER to navigate on-screen menus.
4. Playback (DVD/Audio): Use PLAY, PAUSE, STOP, SKIP (PREV/NEXT) when in DVD or AUDIO mode.
5. Direct Channel Entry: Use numeric keypad to directly enter channel numbers in TV or CABLE/SAT mode.
6. Macro (if available): Program a sequence of commands to a single button (e.g., "Watch DVD" turns on TV, switches to correct input, turns on DVD player).

Note: Some advanced functions of your original remote may not be supported.

Care & Maintenance

Remove batteries before cleaning. Wipe exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners.

CAUTION! Avoid extreme temperatures, humidity, and direct sunlight. Do not drop or subject to strong impact.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003. Sony and the Sony logo are trademarks of Sony Corporation. For support, visit www.sony.com/support or contact Sony customer service in your region.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Dead batteries, obstacles, wrong mode	Replace batteries; ensure clear line of sight to device's IR sensor; select correct MODE.
Only some buttons work	Incorrect code, partial programming	Reprogram remote with correct code for device; try auto-search or another code.
Cannot learn commands	Low battery, distance, incompatible command	Use fresh batteries; place remotes 2-3 cm apart; ensure original remote is IR (not RF).
Remote works intermittently	Weak batteries, interference	Replace batteries; avoid strong fluorescent light or direct sunlight between remote and device.
Device does not respond to POWER	Code not programmed, device issue	Reprogram the POWER code specifically; test with original remote to verify device function.

Reset: Remove batteries, press and hold POWER button for 10 seconds, reinsert batteries to reset all settings.

Service: For persistent issues, contact Sony Support or visit www.sony.com/support.