Sony RMT-D117A Manual

The Sony RMT-D117A is a universal infrared remote control designed for compatibility with various Sony and other brand audio/video equipment. It features programmable buttons, learning capabilities for custom functions, macro programming for multi-device control sequences, backlit keys for low-light use, and ergonomic design. Below are key sections for overview, setup, programming, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Infrared transmitter, LCD display (on some models), programmable buttons, learning sensor, battery compartment, and ergonomic casing.

Feature	Description
Infrared Control	Controls up to 8 different AV devices (TV, DVD, Audio, etc.)
Learning Function	Can learn commands from original remotes
Macro Programming	Stores sequences of up to 16 commands for one-touch operation
Backlit Keys	Illuminated buttons for use in dark environments
Device Selection	Dedicated buttons (TV, DVD, AUDIO, etc.) for quick device switching
Code Search	Automatic and manual code search for device compatibility
Ergonomic Design	Comfortable grip and logically arranged buttons
Battery Indicator	LCD shows battery status (if equipped)
Direct Code Entry	Allows manual entry of manufacturer codes
Reset Function	Restores factory default settings

Package Contents

Unpack and verify all items are present.

1. Sony RMT-D117A Remote Control unit
2. Two AA alkaline batteries
3. User manual (this document)
4. Quick start guide
5. Warranty information card

NOTE: If any item is missing or damaged, contact your retailer or Sony support.

Initial Setup

Prepare remote for first use.

1. Install batteries: Open battery compartment, insert two AA batteries observing correct polarity.
2. Test basic function: Point remote at device, press POWER button to check infrared signal.
3. Select device mode: Press and hold corresponding device button (e.g., TV) until indicator light blinks twice.
4. Program device code: Use auto code search or manual code entry to match your equipment.
5. Test programmed functions: Verify volume, channel, and menu controls work with your device.

CAUTION! Use only recommended battery types; do not mix old and new batteries.

Specifications

• Model: RMT-D117A
• Control System: Infrared wireless remote
• Controllable Devices: Up to 8 (TV, DVD/Blu-ray, Audio, Cable/Satellite, etc.)
• Power Source: Two AA batteries (1.5V each)
• Battery Life: Approximately 6-12 months with typical use
• Operating Range: Up to 8 meters (26 feet) at angle of ±30 degrees
• Learning Capacity: Up to 20 commands (varies by model)
• Macro Memory: Stores up to 4 macros with 16 commands each
• Dimensions: Approximately 220mm x 50mm x 25mm
• Weight: Approximately 150g (including batteries)
• Operating Temperature: 0°C to 40°C (32°F to 104°F)

Button Layout & Functions

Primary control areas: Device selection, navigation, transport controls, numeric keypad, special functions.

Top Section: POWER, DEVICE SELECT (TV, DVD, AUDIO, CABLE, AUX), MUTE, INPUT SELECT

Navigation Cluster: Directional arrows (UP/DOWN/LEFT/RIGHT), OK/ENTER, MENU, RETURN/BACK

Transport Controls: PLAY, PAUSE, STOP, PREV/NEXT, FAST FORWARD, REWIND

Numeric Keypad: 0-9 digits, CH+/-, VOLUME+/-, GUIDE, INFO

Special Functions: LEARNING button, MACRO buttons (M1-M4), CODE SETUP, RESET

LCD Display: Shows active device, battery status, macro indicators (on equipped models)

Programming the Remote

Three programming methods: Auto code search, manual code entry, learning function.

1. Auto Code Search:
   • Turn on device to be controlled
   • Press and hold device button (e.g., TV) until indicator blinks twice
   • Press and hold POWER button while pointing at device
   • Release POWER when device turns off
   • Press ENTER to store code
2. Manual Code Entry:
   • Find correct code from code list in appendix
   • Press and hold device button until indicator blinks twice
   • Enter 3-digit code using numeric keypad
   • Indicator blinks twice to confirm
3. Learning Function:
   • Place original remote 3-5cm from learning sensor
   • Press and hold LEARNING button on RMT-D117A
   • Press button to be learned on both remotes simultaneously
   • Release when indicator blinks twice
   • Test learned function

Advanced Features

Macro Programming: Create command sequences for complex operations.

1. Press and hold desired MACRO button (M1-M4) until indicator lights
2. Press device buttons in sequence (up to 16 commands)
3. Press MACRO button again to end recording
4. Test macro by pressing the MACRO button once

Example Macro: "Watch DVD" - Turns on TV, switches to correct input, turns on DVD player, starts playback.

Backlight Operation: Press LIGHT button to illuminate keys for 5 seconds (on backlit models).

Device Lock: Press and hold two device buttons simultaneously for 3 seconds to lock current device selection.

Battery Replacement

Replace batteries when remote becomes unresponsive or LCD shows low battery indicator.

1. Slide open battery compartment cover on rear
2. Remove old batteries, observing polarity markings
3. Insert two new AA alkaline batteries with correct orientation (+/-)
4. Close compartment cover until it clicks into place
5. Test remote functionality

WARNING! Do not use rechargeable batteries unless specified compatible. Remove batteries if remote will not be used for extended periods.

Care & Maintenance

Proper care ensures longevity and reliable operation.

• Clean with soft, dry cloth only
• Do not use liquids, solvents, or abrasive cleaners
• Keep away from extreme temperatures, humidity, and direct sunlight
• Avoid dropping or subjecting to strong impacts
• Store in cool, dry place when not in use
• Keep learning sensor clean and free from obstructions

CAUTION! Never disassemble remote control; no user-serviceable parts inside.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Operation is subject to the condition that it does not cause harmful interference. ICES-003 Compliance: This Class B digital apparatus complies with Canadian ICES-003. Disposal: Dispose of batteries according to local regulations. Do not dispose with household waste. Copyright © Sony Corporation. Sony and the Sony logo are trademarks of Sony Corporation. For support, visit www.sony.com/support or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote doesn't work	Dead batteries, obstruction, wrong device selected	Replace batteries; ensure clear line of sight to device; select correct device button
Partial functions work	Incorrect code programmed	Reprogram using correct code; try auto code search
Learning function fails	Distance too great, weak original remote signal	Place remotes 3-5cm apart; ensure original remote has fresh batteries
Macro doesn't execute	Too many commands, incorrect timing	Reduce to 16 commands max; ensure devices are powered on and in correct mode
Buttons unresponsive	Battery corrosion, internal damage	Clean battery contacts; if persistent, contact Sony support
Short operating range	Weak batteries, infrared interference	Replace batteries; avoid direct sunlight or strong light sources between remote and device

Reset Procedure: Remove batteries, press and hold POWER button for 10 seconds, reinstall batteries. This clears all programming and restores factory defaults.

Support: Sony Customer Service: 1-800-222-7669; Online: www.sony.com/support