Sony RMT-D1200 Manual

The Sony RMT-D1200 is a universal remote control designed for compatibility with a wide range of Sony and other brand audio/video equipment. It features a backlit LCD display, programmable macro functions, learning capability, and device code library. Below are key sections for overview, setup, programming, operation, and troubleshooting.

Features at a Glance

Key components: Backlit LCD screen, Device selection buttons, Numeric keypad, Navigation pad, Macro buttons, Learning sensor.

Feature	Description
LCD Display	Backlit screen showing active device and function
Device Selection	Buttons for TV, DVD, CABLE/SAT, AUDIO, etc.
Macro Functions	Programmable sequences for multiple commands
Learning Capability	Can learn commands from original remotes
Code Library	Pre-programmed codes for major brands
Numeric Keypad	For direct channel/input selection
Navigation Pad	Directional controls for menus
Backlight	Illuminates buttons in low light
Battery Indicator	Shows remaining battery life on display
Ergonomic Design	Fits comfortably in hand

Package Contents

Unpack and verify all items are present.

1. Sony RMT-D1200 Remote Control
2. Two AA batteries
3. Quick Start Guide
4. Warranty Information Card

WARNING! Keep batteries away from children. If swallowed, seek medical attention immediately.

Initial Setup

Prepare remote for first use.

1. Install batteries: Open battery compartment, insert two AA batteries observing polarity.
2. Power on: Remote will display welcome screen.
3. Select language: Follow on-screen prompts to set display language.
4. Set clock: Configure time and date if supported by your devices.

CAUTION! Use only recommended battery types. Do not mix old and new batteries.

Specifications

• Power Source: 2 x AA batteries (1.5V each).
• Battery Life: Approximately 6 months with normal use.
• Transmission: Infrared (IR) with learning capability.
• Operating Range: Up to 8 meters (26 feet).
• Angle of Operation: ±30 degrees from center.
• Compatibility: Sony and other major brand A/V equipment.
• Display: Backlit LCD with adjustable contrast.
• Dimensions: 220mm x 55mm x 30mm.
• Weight: 150g (including batteries).
• Operating Temperature: 0°C to 40°C (32°F to 104°F).

Controls and Display

Front panel layout and display information.

Top Section: LCD display shows active device, time, battery status.

Device Buttons: TV, DVD, CABLE/SAT, AUDIO, AUX, VCR.

Control Cluster: POWER, VOLUME (+/-), CHANNEL (+/-), MUTE, INPUT.

Navigation: Arrow keys, OK/SELECT, MENU, EXIT/BACK.

Special Functions: MACRO (M1-M4), LEARN, SETUP, DISPLAY.

Numeric Keypad: 0-9, ENTER, CLEAR.

Programming the Remote

Three methods to program devices.

1. Auto Code Search: Hold device button + POWER until LED blinks twice, then press CHANNEL+ repeatedly until device turns off.
2. Direct Code Entry: Press SETUP, enter 3-digit code from code list, press ENTER.
3. Learning Function: Press LEARN, follow on-screen instructions to teach commands from original remote.

Tip: Have device model numbers ready for faster programming.

Advanced Functions

Macro programming and custom settings.

1. Macro Programming: Press and hold MACRO button, select M1-M4, record sequence of commands, press MACRO to end.
2. Backlight Adjustment: Press DISPLAY + VOLUME+ to adjust brightness.
3. Key Lock: Press and hold SETUP + CLEAR for 3 seconds to lock/unlock keys.
4. Factory Reset: Remove batteries, press and hold POWER, reinsert batteries while holding POWER.
5. Clock Setting: Press SETUP + 9 to enter clock setting mode.

WARNING! Do not point learning sensor at strong light sources during programming.

Battery Information

Battery replacement and conservation tips.

1. Replace batteries when display dims or remote becomes unresponsive.
2. Use alkaline batteries for best performance.
3. Remove batteries if remote will not be used for extended period.
4. Battery conservation: Turn off backlight when not needed.

CAUTION! Dispose of batteries properly according to local regulations.

Care & Maintenance

Keep remote in optimal condition.

1. Clean with soft, dry cloth only.
2. Do not use solvents or abrasive cleaners.
3. Keep away from extreme temperatures and humidity.
4. Store in protective case when not in use.

CAUTION! Do not disassemble remote; no user-serviceable parts inside.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received.

Copyright © Sony Corporation. All rights reserved. Sony and the Sony logo are trademarks of Sony Corporation.

For support: Visit www.sony.com/support or call 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries, obstruction	Replace batteries; ensure clear line of sight to device.
Cannot program device	Incorrect code, distance	Verify code in manual; program within 1 meter of device.
Learning function fails	Weak source signal, distance	Use fresh batteries in source remote; place remotes head-to-head.
Macro doesn't execute	Timing issue, device state	Re-record macro with longer pauses between commands.
Display dim or blank	Low batteries, backlight off	Replace batteries; check backlight setting.
Buttons unresponsive	Key lock enabled, dirt	Disable key lock; clean button contacts.

Reset: Perform factory reset if remote becomes unstable.

Service: 1-800-222-7669; www.sony.com/support