Sony RMT-D122P Manual

The Sony RMT-D122P is a universal remote control designed for Sony audio/video equipment, featuring programmable functions, learning capabilities, and compatibility with multiple device types. Below are key sections for overview, features, setup, programming, operation, and troubleshooting.

Features at a Glance

Key components: LCD display, Mode buttons, Numeric keypad, Navigation controls, Function keys, Learning sensor, Battery compartment.

Feature	Description
Universal Compatibility	Controls TVs, DVD/Blu-ray players, audio systems, and cable/satellite boxes
Learning Function	Can learn commands from original remotes
LCD Display	Shows mode and status information
Mode Selection	Dedicated buttons for TV, DVD, AUDIO, CABLE/SAT
Macro Programming	Program sequences of commands for one-button operation
Backlit Buttons	Illuminated keys for low-light conditions
Ergonomic Design	Comfortable grip and intuitive button layout
Battery Indicator	Displays battery status on LCD
Direct Code Entry	Manual programming using manufacturer codes
Reset Function	Restores factory default settings

Package Contents

Unpack and verify all components are present.

1. Sony RMT-D122P Remote Control
2. Two AA batteries
3. User manual (this document)
4. Quick start guide
5. Warranty information card

WARNING! Keep batteries away from children. Do not mix old and new batteries.

Initial Setup

Prepare remote for first use.

1. Insert batteries: Open battery compartment, insert two AA batteries observing correct polarity.
2. Power on: The LCD should display welcome message and battery indicator.
3. Select device type: Press corresponding mode button (TV, DVD, etc.).
4. Program remote: Use auto-search or direct code entry for your device.
5. Test functions: Verify basic commands (power, volume, channel) work with your equipment.

CAUTION! Use only recommended battery type. Remove batteries if not using for extended periods.

Specifications

• Power Source: 2 x AA batteries (1.5V each).
• Battery Life: Approximately 6 months with normal use.
• Operating Range: Up to 8 meters (26 feet).
• Infrared Frequency: 38 kHz carrier frequency.
• Learning Capacity: Up to 20 commands.
• Macro Memory: Stores up to 3 macros with 10 commands each.
• Dimensions: 220mm x 55mm x 25mm.
• Weight: 150g (including batteries).
• Operating Temperature: 0°C to 40°C (32°F to 104°F).
• Compatibility: Most Sony and major brand A/V equipment.

Controls and Layout

Front panel layout and button functions.

Top Section: LCD display showing mode, battery status, and programming indicators.

Mode Buttons: TV, DVD, AUDIO, CABLE/SAT - select device type to control.

Navigation Cluster: Directional arrows, OK/ENTER, MENU, RETURN, EXIT.

Function Buttons: POWER, VOLUME +/- , CHANNEL +/- , MUTE, INPUT/SOURCE.

Playback Controls: PLAY, PAUSE, STOP, PREV, NEXT, FF, REW.

Special Functions: LEARN (for learning mode), MACRO (program sequences), SETUP (access programming menu).

Numeric Keypad: 0-9 digits, CLEAR, ENTER for channel selection and code entry.

Programming the Remote

Three methods to program remote for your devices.

1. Auto-Search Method:
   • Turn on device to be controlled
   • Press and hold corresponding mode button until LCD blinks twice
   • Press POWER repeatedly until device turns off
   • Press ENTER to save code
2. Direct Code Entry:
   • Find manufacturer code in code list (see appendix)
   • Press and hold mode button until LCD blinks twice
   • Enter 3-digit code using numeric keypad
   • Press ENTER to save
3. Learning Function: (See Section 9 for detailed instructions)

Tip: Test all functions after programming. Some buttons may need separate programming.

Operation Guide

Daily use instructions.

1. Select device mode by pressing TV, DVD, AUDIO, or CABLE/SAT button.
2. Use standard controls: POWER, VOLUME, CHANNEL, MUTE.
3. For menu navigation: Use directional arrows and ENTER button.
4. Switch inputs: Press INPUT/SOURCE to cycle through available inputs.
5. Use numeric keypad for direct channel entry.
6. Access special functions: Press SETUP for programming options.
7. Backlight: Press any button to activate backlight (if equipped).

Macro Programming: Program sequences for common tasks (e.g., "Watch DVD" - turns on TV, switches to correct input, turns on DVD player).

Learning Function

Teach remote commands from original remotes.

1. Place both remotes facing each other (3-5 cm apart).
2. Press and hold LEARN button until LCD shows "LEARN".
3. Press button on RMT-D122P you want to program.
4. Press corresponding button on original remote.
5. Repeat for additional commands (maximum 20).
6. Press LEARN again to exit learning mode.

Note: Some proprietary functions may not be learnable. Ensure original remote is functioning properly.

Care & Maintenance

Proper handling and cleaning instructions.

1. Use soft, dry cloth to clean remote surface.
2. Do not use liquids, solvents, or abrasive cleaners.
3. Replace batteries when LCD shows low battery indicator.
4. Store in cool, dry place away from direct sunlight.
5. Avoid dropping or subjecting to strong impacts.
6. Keep away from heat sources and moisture.

CAUTION! Do not disassemble remote. No user-serviceable parts inside.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Operation is subject to the condition that it does not cause harmful interference. Copyright © Sony Corporation. All rights reserved. Sony and the Sony logo are trademarks of Sony Corporation. For support, visit www.sony.com/support or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries, obstruction	Replace batteries; ensure clear path to device IR sensor.
Partial functions work	Incorrect programming	Reprogram remote using correct manufacturer code.
Learning function fails	Distance, weak signal	Place remotes closer; ensure original remote batteries are fresh.
LCD display dim or blank	Low batteries	Replace both AA batteries.
Macro doesn't execute	Programming error	Reprogram macro; ensure all devices are in correct mode.
Buttons unresponsive	Internal damage	Reset remote (see below); contact service if problem persists.

Reset Procedure: Remove batteries, press and hold POWER button for 10 seconds, reinsert batteries. This restores factory defaults.

Service Information: 1-800-222-7669; www.sony.com/support