Sony RMT-D141A Manual

The Sony RMT-D141A is a universal infrared remote control designed for compatibility with various Sony audio/video components. It features a comprehensive button layout for TV, DVD/Blu-ray, audio system, and cable/satellite box control, with learning capabilities for custom functions. Below are key sections covering features, setup, programming, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Infrared transmitter, mode selection buttons, numeric keypad, navigation controls, function buttons, and learning sensor.

Feature	Description
Universal Compatibility	Controls up to 4 devices (TV, DVD/BD, AUDIO, CABLE/SAT)
Learning Function	Can learn commands from original remotes
Direct Code Entry	Manual programming with 3-digit codes
Auto Search	Automatically finds correct device codes
Macro Programming	Programs multiple commands into single button
Backlit Buttons	Illuminated keypad for low-light conditions
Ergonomic Design	Comfortable grip and intuitive layout
Battery Indicator	LED shows battery status
Child Lock	Prevents accidental operation
Setup Button	Accesses programming modes

Package Contents

Unpack and verify all items are present.

1. Sony RMT-D141A Remote Control (1 unit)
2. AAA batteries (2 pieces)
3. Quick Start Guide (1 booklet)
4. Code List Booklet (1 copy)
5. Warranty Information (1 card)

NOTE: Inspect for damage before use. Contact retailer if any items are missing.

First-Time Setup

Prepare remote for initial use.

1. Install batteries: Open battery compartment, insert two AAA batteries observing polarity.
2. Remove protective film: Peel clear film from infrared sensor window.
3. Select device mode: Press TV, DVD, AUDIO, or CABLE/SAT button to choose device.
4. Program remote: Use auto-search or manual code entry for your device.
5. Test functions: Point at device and press POWER to verify control.

CAUTION! Use only AAA batteries. Do not mix old and new batteries.

Specifications

• Model: RMT-D141A
• Type: Universal Learning Remote Control
• Control Method: Infrared (IR)
• Operating Range: Up to 8 meters (26 feet)
• Battery: 2 x AAA (1.5V) alkaline
• Battery Life: Approximately 12 months with normal use
• Dimensions: 155mm x 50mm x 20mm
• Weight: 85g (without batteries)
• Compatibility: Most major brands of AV equipment
• Warranty: 1 year limited warranty

Controls and Layout

Top section: Mode indicators (TV, DVD, AUDIO, CABLE/SAT). Center: Navigation pad (up/down/left/right, OK). Lower section: Numeric keypad (0-9), function buttons.

Primary Buttons: POWER, MUTE, VOLUME +/- , CHANNEL +/- , INPUT, MENU, GUIDE, EXIT, RETURN, OPTIONS.

Special Functions: SETUP (enter programming), LEARN (record commands), MACRO (program sequences), BACKLIGHT (illuminate keys).

Programming the Remote

Three methods: Auto-search, manual code entry, learning function.

1. Auto-search: Press and hold SETUP until mode light blinks twice, press device button, point at device and press POWER repeatedly until device turns off.
2. Manual code entry: Press SETUP, enter 3-digit code from code list, press POWER to test.
3. Learning function: Press LEARN, point original remote at sensor, press button to learn, press corresponding button on RMT-D141A.

Tip: Keep original remote for learning functions. Test all buttons after programming.

Operating Devices

Control multiple AV components.

1. Select device mode: Press TV, DVD, AUDIO, or CABLE/SAT button.
2. Basic control: Use POWER, VOLUME, CHANNEL, MUTE for primary functions.
3. Navigation: Use arrow keys and OK to navigate menus.
4. Input selection: Press INPUT to cycle through video sources.
5. Special functions: Use colored buttons (RED, GREEN, YELLOW, BLUE) for interactive services.

NOTE: Some functions may require programming or learning from original remote.

Learning Function

Teach custom commands to the remote.

1. Prepare both remotes: Have original remote and RMT-D141A ready.
2. Enter learning mode: Press and hold LEARN button for 3 seconds until indicator lights.
3. Position remotes: Place original remote 2-3cm from learning sensor on RMT-D141A.
4. Teach command: Press and hold button on original remote, then press corresponding button on RMT-D141A.
5. Confirm: Indicator blinks twice for success, long blink for failure.
6. Exit: Press LEARN or wait 30 seconds of inactivity.

Limitations: Cannot learn RF or Bluetooth signals. Some proprietary functions may not transfer.

Care & Maintenance

Remove batteries before extended storage. Clean with dry, soft cloth. Avoid moisture and extreme temperatures.

CAUTION! Do not use chemicals or abrasive cleaners. Keep away from direct sunlight and heat sources.

Regulatory Information

FCC Part 15: Class B digital device. Complies with Canadian ICES-003. This device complies with Part 15 of FCC Rules. Operation is subject to conditions: (1) device may not cause harmful interference, (2) device must accept any interference received. Copyright © Sony Corporation. Sony and the Sony logo are trademarks of Sony Corporation. For support, visit www.sony.com/remotesupport or contact 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries, obstacles	Replace batteries; clear line of sight; reduce distance.
Partial functions work	Incorrect code, programming error	Reprogram with correct code; use auto-search.
Learning fails	Weak signal, incompatible command	Move remotes closer; ensure original remote is IR.
Buttons unresponsive	Battery low, internal damage	Replace batteries; reset remote (remove batteries for 1 minute).
Macro not executing	Timing issue, incorrect sequence	Reprogram with longer delays between commands.
Backlight not working	Battery saving mode, faulty LED	Press BACKLIGHT button; replace batteries.

Reset: Remove batteries, press all buttons for 10 seconds, reinstall batteries.

Service: 1-800-222-7669; www.sony.com/remotesupport