Sony RMT-D145A Manual

The Sony RMT-D145A is a universal infrared remote control designed for compatibility with various Sony audio/video equipment. It features a comprehensive button layout for TV, DVD, and audio system control, programmable functions, learning capabilities for non-Sony devices, and ergonomic design. Below are key sections covering features, setup, programming, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Infrared transmitter, Mode selection buttons (TV, DVD, AUDIO), Numeric keypad, Navigation pad, Volume/Channel controls, Power button, Menu/Setup buttons, Learning sensor.

Feature	Description
Universal Compatibility	Pre-programmed codes for major Sony TV, DVD, and Audio systems
Learning Function	Can learn commands from original remotes of other brands
Mode Selection	Dedicated buttons to switch control between TV, DVD, and AUDIO devices
Ergonomic Design	Contoured shape for comfortable grip and easy button access
Numeric Keypad	For direct channel/input selection and menu navigation
Macro Function (Optional)	Ability to program sequence of commands to a single button (if supported)
Backlight (Optional)	Illuminated buttons for low-light conditions (model dependent)
Battery Indicator	Low battery warning via LED or diminished range

Package Contents

Unpack and verify all items are present.

1. Sony RMT-D145A Remote Control unit.
2. Two AAA alkaline batteries.
3. User manual and quick start guide.
4. Code list booklet for Sony and major brands.

NOTE: If any item is missing or damaged, contact your retailer or Sony support.

Initial Setup

Prepare remote for first use.

1. Install batteries: Open battery compartment, insert two AAA batteries observing polarity.
2. Select device mode: Press TV, DVD, or AUDIO button to choose which device to control.
3. Program remote: Use auto-search or direct code entry to sync with your Sony device.
4. Test functions: Point remote at device and press POWER to verify control.

CAUTION! Do not mix old and new batteries or different battery types.

Specifications

• Model: RMT-D145A.
• Type: Universal Infrared Remote Control.
• Power Source: 2 x AAA 1.5V batteries.
• Battery Life: Approximately 12 months with normal use.
• Operating Range: Up to 8 meters (26 feet) at angle of ±30 degrees.
• Infrared Wavelength: 940 nm.
• Compatible Devices: Sony TVs, DVD/Blu-ray players, Audio Systems, Home Theater receivers.
• Learning Capacity: Up to 20 commands (if learning function is supported).
• Dimensions: Approx. 180mm x 50mm x 25mm.
• Weight: Approx. 100g (including batteries).

Button Layout & Functions

Top section: POWER, MODE (TV/DVD/AUDIO). Center: Navigation pad (Up/Down/Left/Right, OK/ENTER). Lower section: Numeric (0-9), Volume (+/-), Channel (+/-), MUTE, MENU, GUIDE, EXIT, RETURN, OPTIONS, INPUT/SOURCE.

Special Buttons: SETUP (enters programming mode), LEARN (activates learning function), MACRO (programs command sequences).

LED Indicator: Blinks to confirm code entry, learning success, or low battery warning.

Programming for Sony Devices

Two methods: Auto-search and Direct Code Entry.

1. Turn on the device you wish to control (TV, DVD player, etc.).
2. Press and hold SETUP button until MODE button blinks twice.
3. Auto-search: Press POWER repeatedly until device turns off, then press ENTER to save code.
4. Direct Code: Enter 3-digit code from code list, press POWER to test, then ENTER to save.
5. Test other functions (Volume, Menu) to ensure full compatibility.

Tip: If code doesn't work, try next code in list for your device model.

Learning Function for Other Brands

Allows remote to learn commands from original remotes of non-Sony devices.

1. Place both remotes (RMT-D145A and original) head-to-head, 2-3 cm apart.
2. Press and hold LEARN button on RMT-D145A until LED lights steadily.
3. Press desired button on RMT-D145A (e.g., POWER). LED blinks.
4. Point original remote at learning sensor and press corresponding button. LED blinks twice upon success.
5. Repeat for other commands. Press LEARN to exit.

WARNING! Learning may not work with all remotes (especially RF or Bluetooth). Ensure original remote is infrared.

Battery Installation

Use only AAA alkaline batteries.

1. Slide open battery cover on rear.
2. Insert two AAA batteries, matching + and - symbols inside compartment.
3. Replace cover securely.

CAUTION! Remove batteries if remote will not be used for extended periods to prevent leakage.

Care & Maintenance

Wipe with soft, dry cloth. Do not use solvents or abrasive cleaners.

CAUTION! Avoid extreme temperatures, humidity, and direct sunlight. Keep away from liquids.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. This device complies with Part 15 of the FCC Rules. Copyright © Sony Corporation. Sony and the Sony logo are trademarks of Sony Corporation. For support, visit www.sony.com/remote or contact Sony Customer Support at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Batteries dead/incorrectly installed	Replace with fresh AAA batteries; ensure correct polarity.
Partial functions work	Incorrect device code	Reprogram remote using correct code for your device model.
Short operating range	Weak batteries or obstacles	Replace batteries; ensure clear line of sight to device's IR sensor.
Learning function fails	Original remote not IR/compatible	Verify original remote uses infrared; move closer during learning process.
Buttons unresponsive	Battery contacts dirty	Remove batteries, clean contacts with dry cloth, reinstall batteries.
LED does not blink	Batteries completely drained	Install new batteries; if still no LED, remote may be defective.

Reset: Remove batteries, press and hold POWER button for 10 seconds, reinstall batteries.

Service: 1-800-222-7669; www.sony.com/remote