sony RMT-D147P manual

The Sony RMT-D147P is a universal remote control designed for compatibility with various Sony and other brand audio/video equipment. It features pre-programmed codes for TVs, DVD/Blu-ray players, audio systems, and cable/satellite boxes, along with learning capabilities for custom setup. Below are key sections covering features, setup, programming, operation, and troubleshooting.

Features at a Glance

Key components: Infrared transmitter, mode selection buttons, numeric keypad, navigation controls, power and volume buttons, learning sensor.

Feature	Description
Universal Compatibility	Pre-programmed codes for Sony and major brands
Learning Function	Can learn commands from original remotes
Mode Selection	TV, DVD, AUDIO, CABLE/SAT buttons for device control
Numeric Keypad	For direct channel/input selection
Navigation Controls	Arrow keys and OK/ENTER for menus
Power Controls	Separate power buttons for each device mode
Volume/Mute	Dedicated volume and mute controls
Battery Compartment	Holds two AAA batteries
Ergonomics	Comfortable grip and button layout
Code Search	Auto-search function for device codes

Package Contents

Unpack and verify all items are present.

1. Sony RMT-D147P Remote Control
2. Two AAA batteries
3. Quick Start Guide
4. Warranty Information Card

NOTE: If any item is missing or damaged, contact Sony support immediately.

Initial Setup

Prepare remote for first use.

1. Insert batteries: Open battery compartment, insert two AAA batteries with correct polarity.
2. Select device mode: Press TV, DVD, AUDIO, or CABLE/SAT button corresponding to your device.
3. Program remote: Use auto code search or manual code entry (see Programming section).
4. Test functions: Point remote at device and test power, volume, and basic controls.

CAUTION! Use only AAA batteries; do not mix old and new batteries.

Specifications

• Model: RMT-D147P
• Power Source: 2 x AAA batteries (1.5V each)
• Battery Life: Approximately 12 months with normal use
• Operating Range: Up to 7 meters (23 feet)
• Transmission: Infrared (IR)
• Compatibility: TVs, DVD/Blu-ray players, audio systems, cable/satellite boxes
• Learning Capacity: Up to 20 commands
• Dimensions: Approximately 180mm x 50mm x 25mm
• Weight: Approximately 100g (with batteries)
• Operating Temperature: 0°C to 40°C (32°F to 104°F)

Button Layout and Functions

Top section: Mode buttons (TV, DVD, AUDIO, CABLE/SAT). Center: Navigation cluster (arrows, OK/ENTER). Lower section: Numeric keypad, volume controls, power buttons.

Key Functions: POWER (turns selected device on/off), MUTE (silences audio), VOL +/- (adjusts volume), CH +/- (changes channels), INPUT (switches input sources), MENU (accesses device menu), GUIDE (displays program guide for cable/satellite), EXIT (closes menus), INFO (displays information).

Special functions: CODE SET (enters programming mode), LEARN (activates learning function), CLEAR (erases learned codes).

Programming the Remote

Two methods: Auto code search and manual code entry.

1. Auto Code Search:
   • Turn on device to be controlled
   • Press and hold CODE SET button until mode light blinks twice
   • Press device mode button (TV, DVD, etc.)
   • Point remote at device and press POWER repeatedly until device turns off
   • Press OK/ENTER to save code
2. Manual Code Entry:
   • Find correct code for your device in code list
   • Press and hold CODE SET until mode light blinks twice
   • Enter 4-digit code using numeric keypad
   • Mode light blinks twice to confirm
   • Test remote functions

Tip: Keep code list handy for reference during programming.

Learning Function

Teach remote commands from original remote.

1. Place both remotes 3-5 cm apart, facing each other
2. Press and hold LEARN button on RMT-D147P until mode light blinks
3. Press device mode button (TV, DVD, etc.)
4. Press button on RMT-D147P you want to program
5. Press corresponding button on original remote
6. Mode light blinks twice to confirm learning
7. Repeat for additional commands (max 20)
8. Press LEARN button to exit learning mode

WARNING! Do not move remotes during learning process. Ensure good battery power in both remotes.

Device Control Modes

Remote can control up to 4 devices simultaneously.

Mode Button	Controlled Device	Common Functions
TV	Television	Power, volume, channels, input, menu
DVD	DVD/Blu-ray player	Play, stop, pause, navigation, menu
AUDIO	Audio system/receiver	Power, volume, source, playback controls
CABLE/SAT	Cable/satellite box	Power, channels, guide, DVR controls

To control a device: Press corresponding mode button first, then use function buttons.

Care & Maintenance

Remove batteries if not using for extended period. Clean with dry, soft cloth. Avoid moisture and extreme temperatures.

CAUTION! Do not use chemicals or abrasive cleaners. Keep away from heat sources.

Regulatory Information

FCC Part 15: This device complies with part 15 of FCC rules. Operation is subject to conditions: (1) device must not cause harmful interference, (2) device must accept any interference received. Copyright © Sony Corporation. All trademarks are property of their respective owners. For support, visit www.sony.com/remotesupport or contact 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries, obstacles	Replace batteries; clear line of sight to device; check distance (max 7m)
Some buttons not working	Incorrect programming	Reprogram remote using correct code; use learning function for missing commands
Cannot enter programming mode	Battery low, button issue	Replace batteries; ensure CODE SET button pressed correctly
Learning function fails	Weak signal, distance	Place remotes closer (3-5cm); ensure original remote has good batteries
Controls wrong device	Mode selection error	Press correct mode button before using functions; reprogram if necessary

Reset: Remove batteries for 30 seconds, then reinsert to reset remote memory.

Service: 1-800-222-7669; www.sony.com/remotesupport