Sony RMT-D171P Manual

The Sony RMT-D171P is a universal infrared remote control designed for compatibility with various Sony audio/video equipment. It features a comprehensive button layout for basic TV functions, device control, and menu navigation. Below are key sections covering features, setup, operation, compatibility, and troubleshooting.

Features at a Glance

Key components: Infrared transmitter, Power button, Numeric keypad, Volume/Channel controls, Navigation pad, Device selection buttons (TV, DVD, AUDIO, etc.), Menu and Setup buttons.

Feature	Description
Infrared Operation	Wireless control up to approximately 7 meters
Multi-Device Control	Controls TV, DVD/Blu-ray, Audio systems, and more
Direct Code Entry	Manual setup using manufacturer codes
Auto Power Search	Automatically finds correct code for some devices
Learning Function	Can learn commands from original remotes (if applicable)
Ergonomic Design	Comfortable grip and intuitive button layout
TV Button	Selects TV control mode
DVD Button	Selects DVD/Blu-ray player control mode
AUDIO Button	Selects audio system/receiver control mode
Power Button	Turns selected device on/off

Package Contents

Unpack and verify all items are present.

• Sony RMT-D171P Remote Control (1)
• AAA Batteries (2)
• Quick Setup Guide
• Compatibility Code List

NOTE: If any item is missing or damaged, contact your retailer.

Battery Installation

Install batteries before first use.

1. Slide open the battery compartment cover on the back.
2. Insert two AAA batteries, observing correct polarity (+/-).
3. Close the cover securely.

WARNING! Do not mix old and new batteries or different types. Remove batteries if not using for extended periods.

Device Setup & Code Entry

To program the remote for your device:

1. Turn on the device you want to control (e.g., TV).
2. Press and hold the corresponding device button (e.g., TV) until the indicator light stays on.
3. Enter the 3-digit code for your device brand from the provided code list.
4. The indicator light will blink twice if the code is accepted.
5. Point the remote at the device and press POWER to test. If the device turns off, setup is complete.
6. If not, repeat steps 2-5 with another code for your brand.

Auto Search Method: If codes are unknown, use auto search: Hold device button until light stays on, then press and hold POWER while pointing at device. Release POWER when device turns off.

Button Layout & Functions

Top Section: POWER, Device buttons (TV, DVD, AUDIO, etc.). Center: Navigation pad (Up/Down/Left/Right, OK/ENTER). Lower Section: Numeric keypad (0-9), Volume (+/-), Channel (+/-), MUTE, MENU, GUIDE, EXIT, INFO, RETURN, OPTIONS.

Special Functions: Press and hold a device button to enter programming mode. Press SHIFT or FUNCTION (if present) to access secondary commands.

Controlling Your TV

1. Press the TV button to select TV mode.
2. Use POWER to turn TV on/off.
3. Use numeric buttons to enter channel numbers.
4. Use CH+/- to change channels.
5. Use VOL+/- to adjust volume; MUTE to silence.
6. Use MENU to access TV settings; navigation pad to browse.
7. Use INPUT or SOURCE to switch between video inputs.

Tip: Ensure you are within range and pointing the remote at the TV's IR sensor.

Controlling Other Devices

For DVD/Blu-ray, Audio System, Cable/Satellite Box:

1. Press corresponding device button (DVD, AUDIO, etc.).
2. Use standard transport controls: PLAY, PAUSE, STOP, SKIP (PREV/NEXT).
3. For audio systems: VOLUME, MUTE, input selection.
4. For set-top boxes: GUIDE, MENU, navigation, numeric keys.

Note: Some advanced functions may require original remote. Refer to device manual for specific operations.

Resetting the Remote

To clear all programming and restore factory defaults:

1. Remove batteries.
2. Press and hold the POWER button for 5 seconds.
3. Reinsert batteries while still holding POWER.
4. Release POWER. All programmed codes are cleared.

Alternatively, some models reset by pressing and holding TV and DVD buttons simultaneously for 3 seconds until indicator blinks.

Care & Maintenance

Use a soft, dry cloth to clean the remote. Do not use liquids or abrasive cleaners.

CAUTION! Avoid dropping or exposing to extreme temperatures, humidity, or direct sunlight. Keep away from liquids.

Specifications

• Model: RMT-D171P
• Power Source: 2 x AAA batteries (included)
• Operating Range: Approx. 7 meters (23 feet)
• Angle of Operation: Approx. ±30 degrees
• Compatibility: Sony and other major brand TVs, DVD/Blu-ray players, audio systems, set-top boxes
• Weight: Approx. 100g (with batteries)
• Dimensions: Approx. 155mm x 45mm x 20mm

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Weak/dead batteries, obstacles, wrong mode	Replace batteries; clear line of sight; ensure correct device button is selected.
Only some buttons work	Incorrect setup code	Reprogram remote with correct code for your device.
Remote works intermittently	Low battery, distance too far	Replace batteries; move closer to device (within 7m).
Cannot program remote	Invalid code, device not compatible	Use auto-search function; verify device is on code list.
Indicator light does not blink	Batteries inserted incorrectly	Check battery polarity and contacts; reinstall.

Support: For further assistance, visit www.sony.com/support or contact Sony Customer Service.