Sony RMT-D181P Manual

The Sony RMT-D181P is a universal remote control designed for compatibility with various Sony and other brand audio/video equipment. It features programmable buttons, learning capabilities, direct code entry, and macro functions for controlling multiple devices. Below are key sections covering features, setup, programming, operation, and troubleshooting.

Features at a Glance

Key components: LCD display, Mode buttons, Numeric keypad, Navigation pad, Function buttons, Learning sensor, Battery compartment.

Feature	Description
Universal Compatibility	Controls TV, DVD, Blu-ray, Audio System, Cable/Satellite
Learning Function	Learns commands from original remotes
Macro Programming	Executes multiple commands with one button
Direct Code Entry	Manual code input for device setup
Backlit Buttons	Illuminated keypad for low-light use
Device Mode Selection	Dedicated buttons for TV, DVD, AUDIO, etc.
LCD Display	Shows mode and programming status
Ergonomic Design	Comfortable grip and button layout
Battery Indicator	Displays battery status on screen
Reset Function	Restores factory default settings

Package Contents

Unpack and verify all items are present.

1. Sony RMT-D181P Remote Control (1 unit)
2. AAA Batteries (2 pieces)
3. User Manual (this document)
4. Quick Start Guide
5. Code List Booklet

WARNING! Keep packaging materials away from children to prevent choking hazard.

First-Time Setup

Prepare remote for initial use.

1. Insert batteries: Open battery compartment, insert AAA batteries with correct polarity.
2. Power on: Remote activates automatically; LCD displays welcome message.
3. Select device type: Press corresponding mode button (TV, DVD, etc.).
4. Auto-search codes: Hold SETUP until LED flashes, then press POWER repeatedly until device turns off.
5. Confirm code: Press ENTER to save code.

CAUTION! Use only specified battery type; incorrect batteries may cause damage.

Specifications

• Model: RMT-D181P
• Power Source: 2 x AAA batteries (DC 3V)
• Battery Life: Approximately 12 months (normal use)
• Operating Range: Up to 8 meters (26 feet)
• Angle of Operation: ±30 degrees
• Infrared Wavelength: 940 nm
• Learning Capacity: Up to 20 commands
• Macro Memory: Stores up to 3 macros
• Supported Brands: Sony, Samsung, LG, Panasonic, Toshiba, etc.
• Operating Temperature: 0°C to 40°C (32°F to 104°F)
• Dimensions: 180mm x 50mm x 25mm
• Weight: 120g (including batteries)

Controls and Layout

Front Panel: POWER, MODE buttons (TV, DVD, AUDIO, CABLE), Numeric keypad (0-9), Navigation pad (Up/Down/Left/Right/OK), Volume/Channel controls, MUTE, MENU, GUIDE, EXIT, INFO, SUBTITLE, AUDIO.

Special Buttons: SETUP (enters programming mode), LEARN (activates learning function), MACRO (records/plays macros), BACKLIGHT (illuminates buttons), DISPLAY (shows device mode).

LCD Display: Shows current mode, battery status, programming indicators, and macro numbers.

Programming the Remote

Three methods: Auto-search, Direct Code Entry, Learning.

1. Auto-search: Hold SETUP until LED flashes, press device button, press POWER repeatedly until device turns off, press ENTER.
2. Direct Code: Press SETUP + device button, enter 3-digit code from code list, press ENTER.
3. Learning: Press LEARN + target button, point original remote at learning sensor (3cm apart), press command on original remote, press LEARN to save.

Tip: Test each button after programming to ensure proper function.

Advanced Functions

Macro Programming: Records sequence of commands.

1. Press and hold MACRO until LED flashes.
2. Press device buttons in desired sequence (max 10 commands).
3. Press MACRO again to save; assign to MACRO 1, 2, or 3 button.
4. Execute macro by pressing assigned MACRO button.

Volume Lock: Locks volume control to specific device. Press SETUP + VOL LOCK + device button.

Key Lock: Prevents accidental button presses. Press and hold SETUP + 9 for 3 seconds.

Factory Reset: Erases all programming. Press SETUP + 0 + 0 + 0.

Battery Information

Use only AAA alkaline batteries. Replace when LCD shows low battery icon or remote becomes unresponsive.

1. Open battery compartment cover on rear.
2. Remove old batteries, dispose properly.
3. Insert new batteries observing correct polarity (+/-).
4. Close cover securely.

WARNING! Do not mix old and new batteries. Do not recharge non-rechargeable batteries.

Care & Maintenance

Clean with dry, soft cloth. Avoid liquids, solvents, or abrasive cleaners.

CAUTION! Do not expose to extreme temperatures, humidity, or direct sunlight. Keep away from heat sources.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Sony Corporation. This device complies with Part 15 of the FCC Rules. For support, visit www.sony.com/support or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Dead batteries, obstruction	Replace batteries; ensure clear path to device; check distance.
Cannot program device	Incorrect code, procedure	Verify code in list; repeat auto-search; try direct code entry.
Learning function fails	Distance, original remote issue	Keep remotes 3cm apart; ensure original remote works; try different button.
Macro doesn't execute	Sequence error, device off	Re-record macro; ensure all devices in macro are powered on.
Buttons unresponsive	Key lock enabled, low battery	Disable key lock (SETUP+9); replace batteries.
LCD display dim/blank	Battery low, damage	Replace batteries; if persists, contact service.

Reset: SETUP + 0 + 0 + 0 restores factory defaults.

Service: 1-800-222-7669; www.sony.com/support