Sony RMT-RMT-D175P Manual

The Sony RMT-RMT-D175P is a universal infrared remote control designed for compatibility with various Sony and other brand audio/video equipment. It features a comprehensive button layout for TV, DVD, Blu-ray, and audio system control, programmable functions, learning capabilities for custom commands, backlit buttons for low-light use, ergonomic design, and long battery life. Below are key sections for overview, setup, programming, operation, maintenance, and support.

1. Features at a Glance 2. Package Contents 3. Initial Setup 4. Specifications 5. Button Layout & Functions 6. Programming the Remote 7. Learning Function 8. Battery Replacement 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Infrared transmitter, LCD display (if applicable), Mode selection buttons (TV, DVD, AUDIO, etc.), Numeric keypad, Navigation controls, Special function keys.

Feature	Description
Universal Compatibility	Pre-programmed codes for Sony and major brands
Learning Function	Can learn commands from original remotes
Backlit Buttons	Illuminated keys for use in dark environments
Mode Selection	Dedicated buttons for TV, DVD, Blu-ray, Audio, Cable
Macro Programming	Program sequence of commands to single button
Ergonomic Design	Comfortable grip and intuitive layout
Battery Indicator	Low battery warning on display
Direct Code Entry	Manual code input for device setup
Child Lock	Prevents accidental button presses
Reset Function	Restores factory default settings

Package Contents

Unpack and verify all items are present.

Sony RMT-RMT-D175P Remote Control (1 unit)
AAA Batteries (2 pieces)
Quick Start Guide
Code List Booklet
Warranty Information Card

WARNING! Keep batteries away from children and pets. Do not mix old and new batteries.

Initial Setup

Install batteries and program remote for your device.

Insert batteries: Open battery compartment, insert two AAA batteries observing polarity.
Select device mode: Press and hold corresponding mode button (TV, DVD, etc.) until LED blinks.
Enter code: Use code list to find brand code, enter via numeric keypad.
Test remote: Point at device and press POWER to test control.
Auto search: If code unknown, use auto search function to cycle through codes.

CAUTION! Ensure correct battery polarity to avoid damage.

Specifications

Model: RMT-RMT-D175P
Power Source: 2 x AAA batteries (included)
Battery Life: Approximately 12 months with normal use
Transmission: Infrared (IR)
Range: Up to 8 meters (26 feet)
Angle: ±30 degrees
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Dimensions: Approx. 180mm x 50mm x 20mm
Weight: Approx. 100g (with batteries)
Compatibility: TVs, DVD/Blu-ray players, Audio systems, Cable boxes

Button Layout & Functions

Top section: POWER, MODE selection (TV, DVD, BD, AUDIO, CABLE/SAT). Center: Navigation (Arrow keys, OK/ENTER, RETURN/BACK). Lower: Numeric keypad (0-9), Volume/Channel controls, MUTE, MENU, GUIDE, INFO, EXIT. Special: LEARN, MACRO, BACKLIGHT, SETUP.

Backlight: Press BACKLIGHT to illuminate keys for 5 seconds. Macro: Program multiple commands to single button. Learn: Copy commands from original remote.

Programming the Remote

Three methods: Direct code entry, Auto search, Learning function.

Direct Code Entry:
- Press and hold device MODE button until LED blinks twice.
- Enter 3-digit code from code list using numeric keypad.
- LED blinks twice to confirm.
Auto Search:
- Press and hold device MODE button until LED blinks twice.
- Press and hold POWER button, remote sends codes automatically.
- Release POWER when device turns off.
- Press ENTER to save code.

Tip: Test all major functions (volume, channel, menu) after programming.

Learning Function

Copy commands from original remote not in pre-programmed codes.

Prepare: Place both remotes facing each other 2-3 cm apart.
Enter learn mode: Press and hold LEARN button for 3 seconds until LED stays on.
Select target button: Press button on Sony remote you want to program.
Send command: Press corresponding button on original remote toward Sony remote.
Confirm: LED blinks then stays on if learned successfully.
Exit: Press LEARN button to exit learning mode.

WARNING! Do not move remotes during learning. Ensure fresh batteries in both remotes.

Battery Replacement

Replace when backlight dims or remote becomes unresponsive.

Open battery compartment on rear.
Remove old batteries, dispose properly.
Insert two new AAA batteries with correct polarity (+/-).
Close compartment securely.

CAUTION! Use only AAA alkaline batteries. Do not recharge non-rechargeable batteries.

Care & Maintenance

Clean with dry, soft cloth. Avoid liquids, extreme temperatures, and dropping.

CAUTION! Do not disassemble remote. Keep away from heat sources and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. ICES-003: Complies with Canadian EMI regulations. Sony and the Sony logo are trademarks of Sony Corporation. For support, visit www.sony.com/remotesupport or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to device IR sensor.
Partial functions work	Incorrect code	Reprogram with correct code; try auto search.
Learning fails	Distance/light interference	Keep remotes 2-3 cm apart; avoid bright light during learning.
Backlight not working	Battery/setting	Replace batteries; ensure backlight function enabled.
Macro not executing	Programming error	Reprogram macro; ensure delays between commands.

Reset: Remove batteries, press all buttons for 10 seconds, reinsert batteries.

Service: 1-800-222-7669; www.sony.com/remotesupport