sony SCD-C222ES - Es Series 5 Disc manual

The Sony SCD-C222ES is a high-fidelity 5-Disc CD Changer from the renowned ES (Elevated Standard) series, designed for audiophiles seeking exceptional sound quality and reliable performance. It features a robust transport mechanism, digital and analog audio outputs, remote control operation, and Sony's proprietary sound-enhancing technologies. Below are key sections covering its features, installation, operation, specifications, and maintenance.

1. Features at a Glance 2. Installation & Setup 3. Front & Rear Panel Controls 4. Specifications 5. Remote Control Operation 6. Connecting to Your Audio System 7. Loading and Playing Discs 8. Playback Modes & Functions 9. Care & Maintenance 10. Regulatory & Support 11. Troubleshooting

Features at a Glance

Key components: 5-Disc magazine loading system, ES-grade digital-to-analog converter (DAC), Remote Commander, Optical and Coaxial digital outputs, Analog stereo outputs.

Feature	Description
5-Disc Magazine	Allows sequential or random playback of up to five CDs
ES-Grade DAC	High-resolution digital-to-analog converter for superior audio fidelity
Digital Outputs	Optical and Coaxial outputs for connection to external processors
Analog Outputs	Stereo RCA outputs for direct connection to amplifiers
Remote Commander	Full-function remote for all playback and setup operations
Direct Disc Access	Quick access to any disc or track via remote or front panel
Program Play	Memory for storing custom play sequences across discs
Repeat & Shuffle	Disc, Track, All, and Random playback modes
Display Dimmer	Adjusts or turns off front panel display brightness
Sturdy Construction	ES-series chassis with anti-vibration design

Installation & Setup

Unpack the unit and all accessories. Place on a stable, level surface away from heat sources and vibrations.

Connect Audio Outputs: Use high-quality RCA cables to connect ANALOG OUT to your amplifier/receiver. For digital connection, use an optical or coaxial cable from DIGITAL OUT to your processor.
Connect Power: Plug the supplied power cord into the AC inlet on the rear panel, then into a standard 120V AC outlet.
Insert Disc Magazine: Load CDs into the supplied magazine, label-side up. Gently insert the magazine into the loading slot until it clicks into place.
Power On: Press the POWER button on the front panel or remote.

WARNING! This component is heavy. Use caution when lifting and ensure adequate ventilation around the unit.

Front & Rear Panel Controls

Front Panel: POWER, OPEN/CLOSE (for magazine), DISC 1-5 buttons, PLAY, STOP, PAUSE, SKIP (|<< / >>|), DISPLAY, DIMMER.

Rear Panel: AC INLET, ANALOG AUDIO OUT (R/L), DIGITAL OUT (OPTICAL, COAXIAL), REMOTE CONTROL IN.

Display Indicators: Disc number, Track number, Time, Play mode, Repeat, Shuffle, Program.

Specifications

Type: 5-Disc Compact Disc Changer
Series: Sony ES (Elevated Standard)
Frequency Response: 2Hz–20kHz (±0.5dB)
Signal-to-Noise Ratio: >115dB
Total Harmonic Distortion: <0.002%
Outputs: Analog Stereo (RCA), Digital (Optical Toslink, Coaxial)
Power Requirements: 120V AC, 60Hz
Power Consumption: 18W (operation), 2W (standby)
Dimensions (W x H x D): Approx. 17" x 4 3/8" x 15 3/4"
Weight: Approx. 18.7 lbs
Remote Control: RMT-C222ES (included, requires batteries)

Remote Control Operation

Remote Commander (RMT-C222ES): POWER, Numeric Keypad (0-9, +10), DISC 1-5, OPEN/CLOSE, PLAY, STOP, PAUSE, SKIP (|<< / >>|), REPEAT, SHUFFLE, PROGRAM, DISPLAY, DIMMER, CLEAR.

To operate: Point the remote at the unit's sensor. Ensure no obstructions and replace batteries if response is weak.

Connecting to Your Audio System

To an Integrated Amplifier/Receiver (Analog): Connect the white (L) and red (R) ANALOG OUT RCA jacks to a corresponding "CD" or "AUX" input on your amplifier.
To a Digital Processor/AV Receiver (Digital): Use a Toslink optical cable or a 75-ohm coaxial cable from the DIGITAL OUT jack to a digital input on your processor.
Remote Control System: Use the REMOTE CONTROL IN jack to integrate with other Sony components via a system control cable.

Tip: For best analog sound quality, use high-grade, shielded interconnects and keep them away from power cords.

Loading and Playing Discs

Only use the supplied 5-disc magazine.

Load Magazine: Press OPEN/CLOSE on front panel or remote to eject magazine (if inserted). Place up to five CDs into the slots, label-side up.
Insert Magazine: Slide the magazine firmly into the loading slot until it is fully seated and the drawer closes automatically.
Select Disc: Press the corresponding DISC button (1-5) on the front panel or remote. The unit will read the disc's Table of Contents (TOC).
Start Playback: Press PLAY. Playback will begin with Track 1.
Stop/Eject: Press STOP. To eject the magazine, press OPEN/CLOSE when the unit is stopped.

WARNING! Never force the magazine. Do not touch the laser lens. Do not use damaged or irregularly shaped CDs.

Playback Modes & Functions

Direct Track Access: Enter track number using numeric keypad on remote, then press PLAY.

Skip: Press >>| to skip forward, |<< to skip backward.

Repeat: Press REPEAT to cycle modes: Off > Disc > Track > All.

Shuffle (Random): Press SHUFFLE to play tracks from all loaded discs in random order.

Program Play:

Press PROGRAM.
Select disc number (1-5).
Select track number.
Repeat steps 2-3 for up to 32 selections.
Press PLAY to start programmed sequence.
Press CLEAR to erase program.

Display / Dimmer: Press DISPLAY to cycle time info. Press DIMMER to adjust display brightness (High > Low > Off).

Care & Maintenance

Unplug the unit from the AC outlet before cleaning.

Exterior: Wipe with a soft, dry cloth. For stubborn marks, lightly dampen cloth with water. Do not use solvents.

Lens Cleaning: Use a commercially available CD lens cleaner only if playback issues occur. Do not attempt to clean the laser lens manually.

CAUTION! Never allow liquid to enter the unit. Avoid placing in humid, dusty, or extremely hot locations.

Regulatory & Support

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation.

For technical support, service information, or to locate an authorized service center, contact Sony Customer Support at 1-800-222-SONY (7669) or visit www.sony.com/support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not power on	Power cord not connected	Ensure power cord is firmly plugged into unit and wall outlet.
Remote does not work	Batteries dead, obstacles, distance	Replace batteries, ensure clear line-of-sight, operate within 23 feet.
Magazine won't insert	Magazine not oriented correctly	Ensure magazine label is facing up and arrows are aligned.
No sound from speakers	Incorrect input selected, cables loose	Select "CD" input on amplifier. Check all audio connections.
Disc skips or won't play	Dirty/scratched disc, dirty lens	Clean disc. Try a different disc. Use a CD lens cleaner.
"Err" or "No Disc" displayed	Disc not loaded, incompatible disc	Ensure disc is loaded label-side up. Use only standard audio CDs.
Digital output has no signal	Wrong input selected on processor	Select correct digital input (e.g., "OPT1" or "COAX1") on your receiver.

Reset: If unit behaves erratically, unplug it from the AC outlet for 2 minutes, then plug it back in.

Service: Do not open the cabinet. Refer all servicing to qualified Sony personnel.