sony SLV-D560P - Dvd Player-video Cassette Recorder manual

The Sony SLV-D560P is a versatile combination DVD Player and Video Cassette Recorder (VCR) unit. It features DVD playback for various disc formats, VHS tape playback and recording capabilities, multiple audio/video inputs and outputs, a built-in TV tuner, timer recording functions, remote control operation, and compatibility with NTSC video standards. Below are key sections covering safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Combined DVD player and VHS VCR deck, Remote Control, Front panel controls, Rear input/output panel, RF input/output for antenna/cable.

Installation

Unpack and inspect contents. Place on a stable, well-ventilated surface.

1. Connect to TV: Use the provided RF coaxial cable to connect the unit's RF OUT to your TV's ANTENNA IN. Alternatively, use AV cables (composite or S-Video with stereo audio) for better picture quality.
2. Connect Antenna/Cable: Connect your antenna or cable TV line to the unit's RF IN connector.
3. Connect Audio System (Optional): Use the AUDIO OUT jacks to connect to a stereo or home theater system.
4. Plug into AC power.

WARNING! Ensure the unit is placed horizontally. Do not stack other equipment on top. Keep ventilation openings clear.

First-Time Setup

Power on the unit and your TV. Follow on-screen prompts or use the menu system.

1. Set TV Channel: If using RF connection, tune your TV to channel 3 or 4 (as set on the unit's rear switch).
2. Program Channels: Use the Auto Program function in the VCR's menu to scan for and store available TV channels.
3. Set Clock: Set the correct time and date in the unit's menu for accurate timer recordings.
4. Set Preferences: Configure language, on-screen display (OSD) settings, and parental controls if desired.

CAUTION! Do not connect or disconnect cables while the unit is powered on.

Specifications

• Type: DVD Player / VHS Video Cassette Recorder Combo.
• Video System: NTSC.
• Tuner: 181-channel cable-ready analog TV tuner.
• Recording Speeds: SP (Standard Play), LP (Long Play), EP (Extended Play).
• DVD Playback: DVD, DVD-R/RW (Video Mode), CD-DA, CD-R/RW, MP3.
• Inputs: RF IN, AV IN (Rear), AV IN (Front), S-Video IN.
• Outputs: RF OUT, AV OUT, S-Video OUT, AUDIO OUT (L/R).
• Power Requirements: 120V AC, 60Hz.
• Remote Control: Infrared, requires 2 x AAA batteries (not included).

Controls and Settings

Access functions via front panel buttons or the remote control. Front Panel: POWER, VCR EJECT, DVD OPEN/CLOSE, VCR Transport Controls (PLAY, STOP, REC, etc.), INPUT SELECTOR.

Remote: POWER, Numeric buttons, INPUT SELECT, VCR/DVD mode selector, Transport controls for both decks, MENU, SETUP, AUDIO, SUBTITLE, ZOOM.

VCR Menu: Clock Set, Channel Setup, Timer Programming, Recording Setup (SP/LP/EP). DVD Menu: Language, Audio, Subtitle, Parental Lock, Display Settings. Parental controls use a default password (often 0000 or 1111).

Connecting Devices

To TV: RF coaxial cable or AV cables (preferred). External Sources (Cable Box, Game Console): Connect to rear AV IN or front AV IN jacks.

1. Turn off all devices before making connections.
2. Match cable colors (Yellow=Video, Red/White=Audio).
3. Select the correct input source on the unit (TV, LINE, FRONT) using the INPUT button.
4. Select the corresponding input on your TV (AV, Video).

Tip: For best picture quality from external devices, use S-Video or composite video connections instead of RF.

Playing DVD Media & VHS Tapes

Playing a DVD:

1. Press DVD OPEN/CLOSE, load disc label-side up, close tray.
2. Press PLAY; use numeric buttons or arrow keys for title/chapter selection.
3. Use STOP, PAUSE, SKIP (PREV/NEXT) for playback control.
4. Use MENU or TITLE to access disc menus.
5. Eject disc before turning unit off.

Playing a VHS Tape:

1. Insert tape with window facing out and label side up.
2. Press PLAY. Use FF/REW for fast search.
3. Press STOP, then EJECT to remove tape.

WARNING! Do not force discs or tapes into their slots. Keep magnets away from the VCR section.

Recording Functions

The unit can record from its internal tuner or an external source (like a cable box) onto a VHS tape.

1. Basic Recording: Tune to desired channel or select external input. Insert a recordable VHS tape. Press REC (and PLAY simultaneously on some models). Select recording speed (SP for best quality).
2. Timer Recording: Access the Timer Program menu. Set start/stop times, date, channel, and speed. Ensure a tape is inserted and the clock is set correctly. The unit will power on and record automatically.
3. Recording from External Source: Connect source to AV IN. Select LINE input. Follow basic recording steps.

Note: Macrovision copy protection may prevent recording of some commercial DVDs and prerecorded tapes.

Care & Cleaning

Unplug the unit from the AC outlet before cleaning.

Exterior: Wipe with a soft, dry cloth. For stubborn stains, dampen cloth slightly with water; never use solvents.

VCR Heads: Use a commercial dry VHS head cleaning tape periodically. Do not use liquid cleaners inside the unit.

DVD Lens: Generally requires no cleaning. If playback issues occur, use a commercial DVD lens cleaning disc.

CAUTION! Never pour liquid into any openings. Avoid extreme heat, cold, humidity, and direct sunlight.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. Copyright © Sony Corporation. Macrovision: This product incorporates copyright protection technology. Unauthorized recording may be restricted. For product support, visit www.sony.com/support or consult your local Sony service center.

Troubleshooting

Reset: Unplug the unit from the wall outlet for 2 minutes, then plug back in to perform a soft reset.

Service: For persistent issues, contact Sony Support or an authorized service provider.