sony SLV-D920 N manual

The Sony SLV-D920 N is a VHS Hi-Fi Stereo Video Cassette Recorder (VCR) with 4-head system, MTS stereo sound, front audio/video inputs, on-screen programming, index search, shuttle/jog dial, auto head cleaning, and remote control. It features VHS playback and recording capabilities, compatibility with NTSC standard tapes, and various audio/video enhancement technologies. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 4-head video system, Hi-Fi stereo audio, Front panel A/V inputs, On-screen display, Index search, Shuttle/jog dial, Auto head cleaning, Remote control.

Feature	Description
4-Head System	For improved picture quality during playback and special effects
Hi-Fi Stereo Sound	High-fidelity audio recording and playback
MTS Decoder	Decodes Multichannel Television Sound broadcasts
Front A/V Inputs	For easy connection of camcorders or other video sources
On-Screen Display	Menu system for easy setup and operation
Index Search	Locates specific sections on tape automatically
Shuttle/Jog Dial	Precise control during playback and editing
Auto Head Cleaning	Automatically cleans video heads to maintain picture quality
Timer Recording	Program up to 8 events for automatic recording
Remote Control	Full-function remote for all operations

Installation

Unpack and inspect contents. Place on stable, level surface near TV.

1. Connect to TV: Use RF coaxial cable or AV cables (composite video and audio).
2. Connect antenna/cable: Attach cable from wall to VCR's ANT IN connector.
3. Connect to TV's antenna input: Run cable from VCR's ANT OUT to TV.
4. Connect audio system: Use audio output jacks to stereo amplifier if desired.
5. Plug into AC power outlet.

WARNING! Ensure proper ventilation; do not block vents. Use correct cables for connections.

First-Time Setup

Power on VCR; follow on-screen prompts.

1. Set clock: Press MENU, navigate to CLOCK SET, enter current time and date.
2. Auto-tune channels: In SETUP menu, select AUTO PROGRAM to scan for available channels.
3. Set recording speed: Select SP (Standard Play) or EP (Extended Play) based on preference.
4. Adjust audio settings: Configure MTS stereo options and audio output levels.

CAUTION! Do not place near heat sources or in humid environments.

Specifications

• Video System: NTSC VHS format.
• Heads: 4 video heads (2 for playback, 2 for special effects).
• Audio System: Hi-Fi stereo with MTS decoder.
• Tuner: 181-channel cable-ready tuner.
• Inputs: RF antenna, composite video, stereo audio (front/rear), S-Video.
• Outputs: RF modulator, composite video, stereo audio.
• Recording Speed: SP (2 hours), EP (6 hours) with T-120 tape.
• Special Features: Index search, blank search, repeat play.
• Power Requirements: 120V AC, 60Hz.
• Dimensions: Standard VCR size (approximately 17"W x 4"H x 12"D).

Controls and Settings

Access OSD via MENU button. Front Panel: POWER, EJECT, CHANNEL buttons, REC, PLAY, STOP, PAUSE/STILL, FF, REW.

Remote: POWER, Numeric buttons, MENU, GUIDE, REC, PLAY, STOP, PAUSE, FF, REW, CHANNEL, VOLUME, MUTE, DISPLAY.

Menu Settings: Clock, Channel setup, Timer programming, Audio options (MTS/SAP), Parental control (V-chip), Display settings. Recording: SP/EP speed selection, Audio recording mode (Hi-Fi/linear). Playback: Tracking adjustment, Noise reduction, Still frame advance.

Connecting Devices

TV: RF or AV connections. Camcorder: Front AV inputs. Audio system: Audio output to amplifier.

1. Turn off all devices before connecting cables.
2. For best picture quality, use S-Video or composite video connections.
3. Set TV to correct input channel (usually CH3 or CH4 for RF, or AV input).
4. For stereo sound, connect both audio cables (left/right).

Tip: Label cables for easy identification during setup.

Playing and Recording Tapes

Supports VHS tapes in SP and EP modes.

1. Insert tape: Press EJECT, insert tape label facing out, push gently to close.
2. Play: Press PLAY; adjust tracking if picture appears noisy.
3. Record: Press REC to start recording; REC+PLAY for manual recording.
4. Pause: Press PAUSE during playback or recording.
5. Fast search: Use FF or REW during playback to locate sections.
6. Index search: Press INDEX during playback to mark locations; use INDEX SEARCH to return.
7. Still frame: Press PAUSE during playback for still image (limit to few minutes).
8. Shuttle/jog: Rotate dial for variable speed playback in either direction.

WARNING! Do not expose tapes to magnets, heat, or dust. Keep fingers away from tape mechanism.

Timer Recording

Program up to 8 recording events.

1. Press MENU, select TIMER PROGRAM.
2. Enter start time, end time, date, channel, and recording speed (SP/EP).
3. Set daily or weekly repeats if needed.
4. Ensure clock is set correctly and VCR is in standby mode at recording time.
5. Use ONE-TOUCH RECORD for quick timer setting (OTR).

Note: Timer requires power; use uninterrupted power source.

Care & Maintenance

Unplug before cleaning. Clean exterior with dry, soft cloth. Use head cleaning tape periodically (follow instructions).

CAUTION! Do not use liquid cleaners; never open cabinet. Replace head cleaning tape as recommended.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © Sony Corporation. Macrovision: Incorporates copy protection technology to prevent unauthorized copying. For support, visit www.sony.com/support or contact 1-800-222-SONY.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet; ensure power switch is on.
No picture	Connections/TV input	Verify all cables are secure; set TV to correct input (CH3/CH4 or AV).
Poor picture quality	Tracking/tape head	Adjust tracking control; clean video heads with cleaning tape.
No sound or distorted audio	Audio connections/MTS setting	Check audio cables; ensure MTS is set correctly for broadcast.
Tape won't eject	Power/mechanism	Ensure unit is powered; if stuck, unplug and wait 10 minutes before retrying.
Remote not working	Batteries/obstruction	Replace batteries; point remote at sensor; remove obstacles.
Timer recording fails	Clock/tape/protection tab	Verify clock is correct; ensure tape has record tab intact; check timer programming.

Reset: Unplug unit for 2 minutes to reset microprocessor if unit locks up.

Service: 1-800-222-SONY; www.sony.com/support