Sony XAV-63 Manual

The Sony XAV-63 is a 6.2-inch multimedia receiver designed for in-car entertainment, featuring a capacitive touchscreen, Apple CarPlay and Android Auto compatibility, Bluetooth connectivity for hands-free calling and audio streaming, AM/FM tuner, USB input, rear camera input, and customizable audio settings. Powered by 12V DC. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 6.2-inch capacitive touchscreen, main unit, wiring harness, remote control, microphone, user manual.

Feature	Description
Display	6.2-inch WVGA (800 x 480) capacitive touchscreen
Smartphone Integration	Apple CarPlay and Android Auto compatibility
Bluetooth	Hands-free calling and audio streaming (A2DP/AVRCP)
Audio Inputs	USB port, auxiliary input (3.5mm jack)
Tuner	AM/FM radio with preset stations
Camera Input	RCA input for rearview camera
Power Output	4 x 55W max power (20W RMS)
EQ Settings	Customizable 10-band equalizer and sound presets
Steering Wheel Control	Compatible with most vehicle steering wheel controls (requires adapter)
Power	Turns unit on/off

Installation

Unpack and inspect contents. Ensure vehicle is parked safely with ignition off.

1. Disconnect vehicle battery: Remove negative terminal to prevent electrical shorts.
2. Remove existing stereo: Use appropriate tools to remove trim and existing head unit.
3. Connect wiring harness: Match colors of vehicle harness to Sony harness (use crimp connectors or solder).
4. Connect antenna and other inputs: Attach vehicle antenna cable; connect USB extension, microphone, and rear camera if applicable.
5. Secure unit: Slide Sony XAV-63 into dash opening and secure with mounting brackets.
6. Reconnect battery and test: Reconnect negative terminal; turn on ignition to test basic functions.

WARNING! Installation involves electrical components. If unsure, consult a professional installer. Ensure all connections are secure and insulated.

First-Time Setup

Power on the unit; follow on-screen prompts.

1. Language selection: Choose preferred language (default is ENGLISH).
2. Pair Bluetooth device: Go to Bluetooth settings, search for "XAV-63" from your phone, and enter PIN if prompted (default 0000).
3. Set radio presets: Tune to desired stations and hold a preset button to save.
4. Configure audio settings: Adjust balance, fader, equalizer to your preference.
5. Connect smartphone: For CarPlay/Android Auto, connect phone via USB cable to designated port.

CAUTION! Perform initial setup while vehicle is parked. Do not operate touchscreen while driving.

Specifications

• Display Size: 6.2 inches diagonal.
• Resolution: WVGA 800 x 480 pixels.
• Touchscreen: Capacitive multi-touch.
• Smartphone Support: Apple CarPlay (wired), Android Auto (wired).
• Bluetooth: Version 4.1, profiles: HFP, A2DP, AVRCP.
• Audio Inputs: USB (supports audio playback and charging), 3.5mm AUX-IN.
• Video Input: 1 RCA input for rear camera.
• Power Output: 55W x 4 channels max (20W RMS).
• Power Source: 12V DC (vehicle electrical system).
• Operating Temperature: -20°C to 60°C (-4°F to 140°F).

Controls and Settings

Access menus via touchscreen or physical buttons. Front Panel: POWER/VOLUME knob, HOME button, physical BACK button.

On-Screen Controls: Home screen provides icons for Radio, Media, Bluetooth, Smartphone Integration, Settings.

Audio Settings: 10-band equalizer, Bass/Treble, Balance/Fader, Loudness, Subwoofer level control. Bluetooth Settings: Pair device, call history, contact sync. System Settings: Display brightness, button illumination color, beep sounds, language, factory reset. Radio: Manual/auto tune, preset stations. Media: Playback from USB or Bluetooth.

Connecting Devices

USB: For iPhone/Android smartphones (CarPlay/Android Auto) or USB storage. AUX: 3.5mm cable for external audio players. Bluetooth: For wireless audio and calls.

1. Ensure unit is on and vehicle is in park.
2. For wired connection, use high-quality USB cable connected to the designated port.
3. For Bluetooth, enable pairing mode on unit and search from your phone.
4. Select correct source on unit (USB, BT AUDIO, AUX).

Tip: Use the supplied USB cable or a certified high-speed cable for reliable smartphone connectivity.

Using Smartphone Integration

Supports Apple CarPlay and Android Auto for navigation, music, messages, and voice commands.

1. Connect phone: Use USB cable to connect phone to the unit's USB port.
2. Grant permissions: On phone screen, allow connection when prompted.
3. Use interface: CarPlay/Android Auto interface will appear on the XAV-63 screen.
4. Voice control: Press and hold the HOME button to activate Siri or Google Assistant.
5. Navigation: Use supported apps like Apple Maps, Google Maps, or Waze.
6. Music: Control Spotify, Apple Music, or other audio apps.
7. Disconnect: Safely disconnect by exiting the mode on the screen before unplugging.

WARNING! Use voice commands or passenger assistance for complex tasks while driving. Keep your attention on the road.

Audio and Sound Settings

Customize sound for your vehicle acoustics. EQ: Select preset (Flat, Powerful, Vocal) or create custom 10-band setting. Sound Field: Adjust listening position (Driver, All, Rear). Advanced Settings: Subwoofer level, loudness (on/off), fader/balance.

Care & Cleaning

Turn off unit before cleaning. Use a soft, dry microfiber cloth to gently wipe the screen. For stubborn smudges, lightly dampen cloth with water. Do not apply pressure.

CAUTION! Do not use chemical cleaners, ammonia, or abrasive materials. Never spray liquid directly onto the screen or unit.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for a vehicular environment. This device complies with Industry Canada license-exempt RSS standard(s). Contains FCC ID: AK8SBTM375 (Bluetooth module). Copyright © Sony Corporation. For support, visit www.sony.com/electronics/support or contact 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Screen is black/no power	Power connection, fuse	Check wiring harness connection; verify vehicle fuse for radio is intact.
Bluetooth not connecting	Pairing mode, old pairing	Ensure unit is in pairing mode; delete "XAV-63" from phone's Bluetooth list and re-pair.
CarPlay/Android Auto not working	Cable, phone settings	Try a different certified USB cable; ensure feature is enabled in phone settings.
No sound from speakers	Audio settings, wiring	Check balance/fader settings; verify speaker wires are connected correctly.
Touchscreen not responsive	Screen protector, calibration	Remove any aftermarket screen protector; perform a system reset via settings menu.

Reset: Settings > System > Factory Reset (Note: This will erase all custom settings and paired devices).

Service: 1-800-222-7669; www.sony.com/electronics/support