Sony XDS-PD2000-J Manual

The Sony XDS-PD2000-J is a professional-grade digital video switcher designed for broadcast and live production environments. It features multiple input channels, advanced transition effects, keying capabilities, serial control interfaces, and robust audio mixing. Below are key sections covering its features, installation, configuration, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operation Modes 8. Advanced Functions 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main control panel, LCD display, multiple BNC input/output ports, serial control ports, power supply unit.

Feature	Description
Input Channels	8 SDI/HD-SDI inputs with auto-detection
Output Ports	2 Program outputs, 1 Preview output, 1 Aux output
Transition Effects	Mix, Wipe, Dip, DVE with adjustable parameters
Keying	4 internal keyers with luminance/chroma key
Audio Mixer	4-channel stereo audio mixer with faders
Control Interface	RS-422 serial port for external automation
LCD Display	Status and menu navigation
Power Supply	Internal universal power supply (100-240V)
Memory	99 scene memories
Frame Synchronizer	Built-in on all inputs

Installation

Unpack and inspect contents. Ensure proper ventilation and mounting.

Rack mounting: Use provided brackets and secure with screws.
Connect video sources: Use BNC cables to INPUT 1-8 ports.
Connect outputs: Connect Program and Preview outputs to monitors/recorders.
Connect control: Use RS-422 cable for external control system.
Connect power: Plug into AC power source.

WARNING! Unit is heavy; use two people for rack mounting. Ensure adequate ventilation space.

First-Time Setup

Power on unit; initialize system settings.

Input configuration: Press SETUP, select Input Format for each channel.
Output format: Set output resolution (SD/HD) in System menu.
Audio setup: Configure audio follow video or separate routing.
Memory initialization: Clear factory presets if needed.
Save configuration: Store settings to memory slot 1.

CAUTION! Allow unit to reach room temperature before powering on in cold environments.

Specifications

Video Inputs: 8x BNC, SDI/HD-SDI auto-switching
Video Outputs: 2x Program, 1x Preview, 1x Aux (BNC)
Audio Inputs: 4x XLR balanced, +4dBu
Audio Outputs: 2x XLR stereo program audio
Control: RS-422 serial, GPI triggers
Power Consumption: 85W maximum
Operating Temperature: 0°C to 40°C (32°F to 104°F)
Dimensions: 19" rack mount, 3U height
Weight: 8.5 kg (18.7 lbs)

Controls and Settings

Access menus via LCD panel buttons. Front Panel: POWER, TRANSITION buttons, KEYER controls, AUDIO faders.

Main Controls: CUT button, AUTO TRANSITION lever, MIX/WIPE/DIP selectors, KEY ON/OFF buttons.

Video Settings: Input format, output resolution, frame sync enable/disable. Audio Settings: Channel levels, mix minus, tone generator. System: GPI mapping, serial protocol, memory management. Effects: Wipe patterns, border width, soft edge, DVE parameters.

Connecting Devices

Video: BNC cables for SDI sources. Audio: XLR cables for balanced audio. Control: RS-422 for automation.

Turn off all devices before connecting.
Use 75-ohm BNC cables for video connections.
Match audio input levels to source equipment.
Set termination switches for end-of-line connections.

Tip: Label all cables for easy identification during operation.

Operation Modes

Supports live switching, recorded playback, and automated operation.

Basic switching: Select preview source, execute transition to program.
Audio mixing: Adjust faders for each audio channel.
Keying: Enable keyer, select source, adjust clip/gain.
Memory recall: Store and recall complete setups.
GPI triggers: Use external contact closures for automation.
Serial control: Respond to Sony protocol commands.

WARNING! Always preview transitions before taking to program output.

Advanced Functions

MultiView: Configure auxiliary output as multi-view display. Macro Functions: Record and play back operation sequences. Tally Outputs: Provide external tally signals for camera control.

Care & Maintenance

Regular cleaning of front panel and connectors. Check firmware updates periodically.

CAUTION! Use only dry, lint-free cloth for cleaning. Do not use compressed air on internal components.

Regulatory Information

FCC Part 15 Class A: For commercial use. CE compliant for European market. Copyright © Sony Corporation. For technical support, visit pro.sony.com or contact Sony Professional Solutions at 1-800-686-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No video output	Input format mismatch	Check input format settings; verify cable connections.
Audio distortion	Level mismatch	Adjust input trim; check for clipping indicators.
Keyer not working	Source selection	Verify key source is assigned; adjust clip/gain settings.
Control not responding	Protocol settings	Check serial protocol selection; verify baud rate.
Overheating	Ventilation blocked	Ensure adequate airflow; clean air filters.

Reset: Hold SETUP + POWER for 5 seconds to factory reset (memories preserved).

Service: 1-800-686-7669; pro.sony.com